About FRagg.1

FRagg.1 · 2021-01-28

Hi,we implemented your reference design coming from the STEVAL-ESC002V1 that is suitable for 2S to 6s battery.We found that the circuit didn't work under the 6.5Volt and we have the confirmation of this out of spec because STSPIN32F0A is working from...

FRagg.1 · 2021-01-08

Hi what is the rationale to dimension the capacity of the to two bulk capacitors C22,C21?There are a lot of ESC COTS that havent these big caps.Thanks

FRagg.1 · 2020-06-16

FRagg.1 · 2021-02-19

Buongiorno Cristiana,cambio lingua in quanto immagino che siamo entrambi italiani.Capisco le tue osservazioni, ma il chip (STSPINxxx) dichiara che come tensione minima di funzionamento (VM) per il fornt end analogico è di 6.7 volt che è ben superiore...

FRagg.1 · 2020-06-19

I want to provide the 7V (2s conf) directly on the +10V line; I want to create a link from the external power supply and the positive side of C42 or C45 by means a little wire soldered on the appropriate terminal of the capacitor. Obviously, I will ...

User statistics

User Activity

STEVAL-ESC002V1 and STSPIN32F0A 2S configuration

Steval-esc002v1 bulk capacitors.

Is it possibile to power the board B-G431B-ESC1 with a 2s battery pack? I look the schematic and there is not an electronic limitation (all the components and uP are powered with +5 or +3.3) , so I wnat to know, why there is this limitation.

Re: STEVAL-ESC002V1 and STSPIN32F0A 2S configuration

Re: Is it possibile to power the board B-G431B-ESC1 with a 2s battery pack? I look the schematic and there is not an electronic limitation (all the components and uP are powered with +5 or +3.3) , so I wnat to know, why there is this limitation.