About jartigas

jartigas · 2021-04-12

Dear ST member,I attached a piece of my schematics design. Can LIS2DH works with pins 3 (SA0) and 4 (CS) not connected?Regards

jartigas · 2012-10-09

Posted on October 09, 2012 at 10:45Hello I'm trying to communicate with SPI from my application in C with two L6470 configured in daisy chain mode. Sending data but I get no response from the pin DSO of the first L6470. Someone can tell me the step...

jartigas · 2012-11-20

Posted on November 20, 2012 at 10:02Sorry, I changed the function of reading on which I put above. The current is: uint32_t dSPIN_Get_Param(uint_8 param, uint_16 niMotor) { uint32_t temp = 0; uint32_t temp2 = 0; uint32_t rx = 0; uint...

jartigas · 2012-11-20

Posted on November 20, 2012 at 09:57The result of reading is always 0xffff.

jartigas · 2012-11-19

Posted on November 19, 2012 at 16:40Hello. Thanks for the reply. I have checked that the functions dsPIN_Nop and dsPIN_Write_Byte only set to 0 the CS line, so use fflush() function to set it to 1. The writing in both engines working properly me, b...

jartigas · 2012-10-16

Posted on October 16, 2012 at 10:33 The original post was too long to process during our migration. Please click on the provided URL to read the original post. https://st--c.eu10.content.force.com/sfc/dist/version/download/?oid=00Db0000000YtG6&ids...

jartigas · 2012-10-10

Posted on October 10, 2012 at 09:21Hello I've gotten the second L6470 send data by SDO. I'm trying to execute the MOVE command and get it to move the engine for the first L6470, but I can not make it move the second. Can anyone tell me how I should ...

User statistics

User Activity

LIS2DH, bad pin configuration?

Communication via SPI with L6470 in mode daisy chain

Re: Communication via SPI with L6470 in mode daisy chain

Re: Communication via SPI with L6470 in mode daisy chain

Re: Communication via SPI with L6470 in mode daisy chain

Re: Communication via SPI with L6470 in mode daisy chain

Re: Communication via SPI with L6470 in mode daisy chain