About davidbleakley9

davidbleakley9 · 2011-09-29

Posted on September 29, 2011 at 12:41I am using ST Visual Develop STM8S105xx Datasheet Page 57 details the 96-bit unique device identifier My Device is STM8S105K6 I am using stm8s_flash.c to call the FLASH_ReadByte function as follows: for (i=0; i<1...

davidbleakley9 · 2024-09-27

Does the input range 1200mV +-400mV mean:The ADC will read 800mV-1600mV and a higher or lower value will be clipped to the max-min.If so, when measuring a regulator's Voltage, ST expects the regulator voltage to be a resistor divided down to centre o...

davidbleakley9 · 2011-11-09

Posted on November 09, 2011 at 18:54I have received the following from ST: The unique ID's are being programmed inside the STM8 products during their production only from second half of 2010. If you get samples with marking ending by for example MYS...

davidbleakley9 · 2011-10-20

Posted on October 20, 2011 at 12:34I am also using FLASH_readbyte(), I imagine that only ST would know this. You could try tech support.

davidbleakley9 · 2011-10-14

Posted on October 14, 2011 at 19:04I have replaced the STM8 with a different device (from RS) I get: Unique ID [0x48CD]= 0x0 Unique ID [0x48CE]= 0x3D Unique ID [0x48CF]= 0x0 Unique ID [0x48D0]= 0x60 Unique ID [0x48D1]= 0x17 Unique ID [0x48D2]= 0x36 ...

davidbleakley9 · 2011-10-07

Posted on October 07, 2011 at 18:02My supplier has confirmed one of the batches was missing the unique id. I will confirm if my devices are part of this batch.

User statistics

User Activity

Unique ID Returning Zeros

Re: LIS3DH Auxiliary ADC using STM8 is giving constant value

Re: Unique ID Returning Zeros

Re: STM8S 96 bit Unique ID on Ride7

Re: Unique ID Returning Zeros

Re: Unique ID Returning Zeros