About toddberk

toddberk · 2014-10-25

Posted on October 26, 2014 at 04:44Our STM32F103 application hangs consistently within minutes under normal operation without the debugger, but when trying to debug running with ST-LINK SWD it doesn't hang (not using breakpoints).What is different w...

toddberk · 2014-03-13

Posted on March 14, 2014 at 04:56 I just got a STM32F103 nucleo board and am having issues getting UART2 enabled in my code to communicate with the PC through the ST-Link virtual port. UART2 is conncected to the ST-Link uart, which gets passed t...

toddberk · 2010-11-10

Posted on November 10, 2010 at 09:58Timer One Pulse Mode issues

toddberk · 2014-03-14

Posted on March 14, 2014 at 18:48 Thank you! You caught it, I was trying to send an APB1 clock constant to the APB2 function. I've been away from embedded systems a couple years and have gotten rusty. I also switched TC to TXE. Here's the code t...

toddberk · 2011-05-17

Posted on May 17, 2011 at 14:14Thanks clive1,I think this would probably work, thanks for your example. I will try it. I know I didn't specify the pulse should change in my original post, but in order to maximize resolution for adjusting the pulse w...

toddberk · 2011-05-17

Posted on May 17, 2011 at 14:14MCU Lüfter,Sorry I should have specified that - the application is to drive numerous RC Servos without much CPU overhead or wait loops. Therefore I would like to vary the Pulse signal from approximately 1ms to 2ms.An e...

User statistics

User Activity

Unable to replicate hang when debugging with ST-LINK

Help with UART2 output on new STM32nucleo board

Timer One Pulse Mode issues

Re: Help with UART2 output on new STM32nucleo board

Re: Timer One Pulse Mode issues

Re: Timer One Pulse Mode issues