Posted on May 17, 2011 at 13:25Thanks for your quick replay. After a series tests, the problem isn’t a crosstalk and the signal are ok I check with scope. I inject the same DC signals to the ADC channel_3 and channel_1 (channel_3 is the 1st and ch...
Posted on May 17, 2011 at 13:25Hi, All. I work with STM32F103 and IAR embedded workbench IDE. I initialized the ADC as discontinuous mode regular group with two channels (channel 1 and 3) and DISCNUM[2:0] bits in the ADC_CR1 = 1. The ADC freq = 12MH...
Posted on May 27, 2008 at 07:29I worked with STR751, IAR compiler and have problem with some device to exit from stop mode (LP_PARAM15) . I found that the device wake up from interrupt (EXTIT_ITLine15 (wake up) or EXTIT_ITLine4 (external interrupt l...
Posted on March 27, 2008 at 11:25Hi all, I work with STR751 device and i have strange phenomenon with some of the devices. I configured the RTC EXTIT line 15 and P1.15 as shown below. The code is work fine but I have some devices thet didn't jump to...
