About m8r-xuulk51

m8r-xuulk51 · 2016-11-16

Posted on November 17, 2016 at 08:57Dear all,I have an STM32F746G-DISCO and wanted to get started with printing some text with printf() over the virtual serial COM-port USART1 which is connected via the ST-Link v2.1 with a USB-cable to the PC.I used...

m8r-xuulk51 · 2017-07-28

Posted on July 28, 2017 at 13:18Hi,I also struggled with this one, and gave up: what peripherals need to be activated and with which settings.It would be extremely helpful if the ST simply would have provided the .ioc file for the example applicatio...

m8r-xuulk51 · 2017-07-28

Posted on July 28, 2017 at 11:00Hello Marcus,This means, that you should copy these 4 functions from stm32f7xx_hal_uart.c to customUart.c.For your second part of the question: I included the source for emCustomUart.h in my post.

m8r-xuulk51 · 2017-07-14

Posted on July 14, 2017 at 08:31 You are right @matthewgkerr In my original post, I forgot to say to remove the pointer incrementing. This approach is intended to receive byte-by-byte, so the buffer is only 1 byte long. I updated my original post a...

m8r-xuulk51 · 2017-07-13

Posted on July 14, 2017 at 08:44 For reference: If you want to stick with the HAL-Library, you could trythis method: https://community.st.com/0D50X00009XkfrWSAR

m8r-xuulk51 · 2017-07-04

Posted on July 05, 2017 at 07:48Dear ST Team,this bug is still present in STM32CubeMx 4.21.0The code generated for a STM32F746G-DISCO (chip STM32F746NGHx) the assignemt of these PIN labels to the actual pin (PA8, and PI0) are swapped.ARDUINO PWM/CS/...

User statistics

User Activity

STM32CubeMx does not generate syscalls.c

Re: How to Set CUBEMX to Support LCD Display for STM32F469i-DISCO

Re: CubeMX - UART receive complete interrupt

Re: CubeMX - UART receive complete interrupt

Re: STM32F7 HAL_Uart_receive_IT revisited

Re: STM32F7 Discovery: Pins PA8 and PI0 are swapped on the Arduino header