About juliuscaesar

juliuscaesar · 2021-05-26

Hey,I have a discovery board (https://www.st.com/resource/en/data_brief/32f429idiscovery.pdf)This board has an on board 64 MBit SDRAM.Now i have read in other posts that RAM extension is not possible in an SPC line MCU. However what about the STM32F4...

juliuscaesar · 2018-06-24

Posted on June 24, 2018 at 21:34Hey guys,I'm using C++ on my STM32F429 with G++ compiler.I was trying to test the limits of the vector class. However I'm always running into a hard fault. I'm expecting a bad alloc exception instead.http://www.cplusp...

juliuscaesar · 2018-04-27

Posted on April 27, 2018 at 09:54Hey guys,i was wondering how to Programm an STM32 using the stlink with a C# Interface.I noticed that the SW4STM32 IDE connected to the st link by searching for a hid device with specified VID and PID.(I'm not lookin...

juliuscaesar · 2018-03-14

Posted on March 14, 2018 at 22:47hey guysI have an stm32f4 discovery board and used stm32 cube to generate a SW4STM32 project with freertos.SW4STM32 is able to convert a c project to c++ project.I have read about the problem when mixing c and c++ co...

juliuscaesar · 2017-05-21

Posted on May 21, 2017 at 22:05hey guys,i'm interested in a SD breakout board for my STM32F427 disco board.I'd like to use the MCUs SDIO Pins for the communication with the SD breakout board.Of course when you search for 'sd breakoutboard' there are...

juliuscaesar · 2021-05-31

hey thx for your answers this seams a little more complicated than I hoped :pI need to do some backgroud reading first. But i believe I get the idea of how it's working. ;)greets Julian

juliuscaesar · 2021-05-27

Hey thx for your reply. I have been looking at the example project.But I still have 2 questions:1) in middlewares/fatfs/drivers/sdram_diskio.c there are 2 functions which seem to be used read/write variables in the external RAM/** * @brief Reads ...

juliuscaesar · 2021-05-26

hey thx for your fast answer. The disc board above has an LQFP144 pin package. :)I know that QuadSPI or Octa SPI is recommended for using external memory. However I ony got this board here, and it should only serve as a proof of conecpt ;)How can I e...

juliuscaesar · 2018-07-09

Posted on July 09, 2018 at 22:38@Turvey.Clive.002I used True Studio to reproduce the error.Looks like I&39m allocating memory from some protected regions.I did track down the problem. The problem is C++ new operator which is probably used internally...

juliuscaesar · 2018-06-25

Posted on June 25, 2018 at 23:26hey,the faulty part is that my vector get's larger than the available free heap. The vector probably trys to allocate memory from some protected area.How can i diagnose the hard fault further. There is no stack trace....

User statistics

User Activity

Extend RAM STM32F429

C++ no bad alloc exception for vector class

How to access the ST Link Driver as HID device (NOT VCP)

stm32 c++ Linker error

SD Card breakout board

Re: Extend RAM STM32F429

Re: Extend RAM STM32F429

Re: Extend RAM STM32F429

Re: C++ no bad alloc exception for vector class

Re: C++ no bad alloc exception for vector class