Posted on January 14, 2012 at 21:56Hello,STM8L has 2 comparators: COMP1and COMP2. COMP2 is very useful as it has an ability to get any desired threshold: either internal or external. The only threshold for COMP1 is internal Vref, so I'm wondering wh...
Posted on June 16, 2011 at 07:38Good day, I've started some time ago with the STM8S Discovery, STVD and Cosmic limited to 16k. I'm now at the point where i need to answer the following: - How can I check how much memory space on the chip is being us...
Posted on February 27, 2012 at 17:05Hi, I'm using ST Visual Develop 4.3.0 to write code for an STM8L. Is it possible to set-up a project so that its output is a library rather than a hex file? I've got driver code that I'd like to use in a different...
Posted on September 07, 2011 at 15:38When the JP instructions jump less than 92H I haven't any problem, but if it jumps more than 92H the JP and Call command do not work properly. I am sure to be in the same section because I use STM8S105C6. Example...
Posted on February 14, 2012 at 04:33Hi All, I have problem with my I2c while communicating with Gyro, i have configured my micro as master mode with standard mode , Some times SCL and SDA go low after i receive some bytes from gyro. i am using ST...
Posted on February 23, 2012 at 23:15HelloI'm using STM8l discovery kit ,and I want to use RTC to have real time of some events,but I want to get accuracy of millisecond not just second(I dont find anything about it in RTC lib),how can I have it?
Posted on February 21, 2012 at 12:20I plan to do 8bit 128 samples FFT with STM8 16Mhz MCU. For my application? only 14 ms for FFT.Does ST offer STM8 FFT module, or anyone can guide me to the optimized STM8 FFT software module. #stm8-fft-asm
Posted on February 13, 2012 at 16:01Hi! I have a probem with a simple software that I've wrote to learn to use timers.This is the code that I've used.&sharpinclude ''stm8l15x.h''main(){ TIM4_DeInit(); TIM4_TimeBaseInit(TIM4_Prescaler_2048, 200); T...
Posted on January 20, 2012 at 15:43Hi i have problem about Usart interrupt . I checked everything i use RFI interface for transmit and receive data. I can transmit data correctly(i checked with USBee) but my mcu not calculate receive data. Problem c...
Posted on February 15, 2012 at 15:17 STM8S-Discovery ST-Link error [30200] Investigating some problems with ST-Link not found errors [30200], I found with MS USB Device Viewer ( http://www.ftdichip.com/Resources/Utilities/usbview.zip), t...