BOM of NUCLEO-G431RB Board

saurabhkore · ‎2025-04-11

We are currently working on project, for which we are using the NUCLEO-G431RB development board. As we are now planning to move towards production of our devices, we require both the schematic and the Bill of Materials (BOM) for this board.

I got schematic but not BOM if it is possible then please share the BOM.

Thankyou.

Andrew Neil · ‎2025-04-11

Go to the Product Page; look on the 'CAD Resources' tab:

https://www.st.com/en/evaluation-tools/nucleo-g431rb.html#cad-resources

A complex system that works is invariably found to have evolved from a simple system that worked.
A complex system designed from scratch never works and cannot be patched up to make it work.

View solution in original post

Andrew Neil · ‎2025-04-11

Go to the Product Page; look on the 'CAD Resources' tab:

https://www.st.com/en/evaluation-tools/nucleo-g431rb.html#cad-resources

A complex system that works is invariably found to have evolved from a simple system that worked.
A complex system designed from scratch never works and cannot be patched up to make it work.

saurabhkore · ‎2025-04-11

Thnkyou sir.

Andrew Neil · ‎2025-04-11

You're welcome.

That's always the place to look.

A complex system that works is invariably found to have evolved from a simple system that worked.
A complex system designed from scratch never works and cannot be patched up to make it work.