cancel
Showing results for 
Search instead for 
Did you mean: 

download.spc5studio.com

Erwan YVIN
ST Employee

Important Upgrade : SPC5Studio 5.8.1 is available

Dear All ,

SPC5Studio 5.8.1 is available

New or updated components

Core 1.2.0

  • Mass Market:
    • SPC5Studio multi update site components management (see above).

Flash 1.7.0

  • Selected Customers:
    • Flash driver for SPC58xHxx

RLA 1.5.0

  • Mass Market:
    • Pictus review (support for Small and Medium)
    • Add DSPI support for SPC58xNxx
    • Add Cache Management support for SPC574Kxx, SPC574Sxx, SPC584Bxx, SPC58ECxx, SPC58xGxx, SPC58xHxx, SPC58xExx and SPC58xNxx.
    • SARADC driver enhancement (channel support) for SPC570Sxx, SPC572Lxx, SPC574Sxx
  • Selected Customers:
    • Add Wakeup support for SPC58ECxx and SPC58xHxx
    • Add Cache Management support for SPC584Bxx, SPC58ECxx, SPC58xGxx, SPC58xHxx, SPC58xExx and SPC58xNxx.
    • LinFlex driver enhancement (synchronous/asynchronous transfer support, DMA support, Lin protocol support for SPC582Bxx, SPC584Bxx, SPC58ECxx and SPC58xGxx)
    • SPC58xHxx Starter Kit (DMA, LinFlex, STM, PIT, DSPI, CAN, WKPU, Flash)
  • SARADC driver enhancement
    • channel support for SPC582Bxx, SPC584Bxx, SPC58ECxx, SPC58xGxx, SPC58xExx, SPC58xNxx,
      • watchdog support for SPC58xExx
      • DMA support for SPC58xExx and SPC58xNxx
      • eMIOS driver enhancement for SPC58ECxx (enable/disable period/channel interrupts support, delay support, external clock support)
      • eMIOS support for SPC582Bxx
    • DMA support, trigger support for SPC58xNxx

Runtime I/O 1.1.0

Now available for all platforms and compatible with GHS

Firmware updater 1.1.0

  • Mass Market:
    • Firmware updater component for SPC572Lxx
  • Selected Customers:
    • Firmware updater component for SPC58xExx, SPC58ECxx and SPC58xHxx (OTA support on SPC58xHxx)

Tsens 1.0.0

  • Tsens for SPC572Lxx and SPC58xExx

More information on

http://download.spc5studio.com/updates/

Best regards

Erwan

This discussion has been locked for participation. If you have a question, please start a new topic in order to ask your question
0 REPLIES 0