Solved

Hi everyone, I have question for a particular situation. Me and my collegue are working on the same project in STM32CubeIDE but something really strange is happening: On his laptop the project forlder and the .ioc file have a different name and everything is working correctly, If I try to do the same on my laptop I can't do it and if I try to open the .ioc file it says The thing is, my collegue is not doing this on purpose. Is there a way to generally make it work or is it just a bug?

In the cube monitor I didn't have acquition in and acquition out nodes , how can I add these nodes to my pallette and send me the links to install these nodes to my pallette

Hello STM Community,I am working with the STHS34PF80 presence detection sensor on an STM32WB55 development board, and I've encountered an unexpected issue with its detection behavior.Problem Description:When an object like plastic or paper passes in front of the sensor, it does not detect the object's presence, which I understand could be due to these materials not emitting enough infrared radiation. However, the problem occurs after the object is removed. Once the object is no longer in front of the sensor and there is no one around, the sensor unexpectedly detects a "presence."Observations:The sensor detects human presence accurately.The false presence detection only happens after an object (plastic, paper, etc.) is moved away.There are no obvious environmental changes (such as temperature shifts or airflow) when the false presence is detected.The object itself does not seem to be detected at all while in front of the sensor.Question:Has anyone experienced similar behavior with the S

Hi ~I am using STM32MP157F MPU with my custom board. Touch controller is TSC2007 with resistive touch screen. I already checked st wiki. https://wiki.st.com/stm32mpu/wiki/How_to_calibrate_the_touchscreenbut, unfortunately I don't use Weston. I am using Embedded Wizard GUI development tool. How to calibrate touch screen in non-Weston ?Thanks ~

Hello Everyone,I have read several posts on this forum for the same problem that I am posting.I cannot download CubeMX, CubeIDE, CubeProgrammer from the Developer zone.I have tried several browsers (Firefox, Brave).I have tried 2 desktop computers (HP and Dell). OS is Win7 on both.On the HP, I can't even log in to st.com. When I enter my credentials, it takes me to a page that says, Sorry that page does not exist (404 error).On the Dell I can log in and here is what happens:Your website takes me around in circles.I log in and proceed to the page for software download.I select CubeMXI select WindowsI Accept agreementThen it takes me back to the page that I started at.This is second day that I haver been going around in circles.I have tried logging in as guest with no downloading success.Any HELP is MUCH appreciated.I have a Nucleo board and would like to start programming it !Are the software tools available somewhere else like github or sourceforge?Many thanks,robert   &

hello,I want to train using Model Zoo with a custom dataset. I'm trying to convert the data from COCO format to Darknet format, but I encountered an error with the YAML file (see attached).

NUCLEO STM32 I2CHello, I'm trying to make a master NUCLEO-FR103RB send data to a slave device using fast mode (400 kHz). Slave to master is not essential at the moment. As slave I am using the Total Phase AARDVARK in slave mode simulating a LED driver which is going to be implemented later on.I2C frequency = 400 kHz0x28 Slave addressVCC = 5VRP = 3.9 kΩ (Not sure if optimal) uint8_t TX_Buffer[] = "Hello Aardvark"; // Data to send uint16_t I2C_ADDRESS = 0x28; // Aardvark I2C address (7-bit)HAL_I2C_IsDeviceReady(&hi2c1, (uint16_t) (I2C_ADDRESS << 1), 3, HAL_MAX_DELAY);HAL_I2C_Master_Transmit_IT(&hi2c1, I2C_ADDRESS, TX_Buffer, sizeof(TX_Buffer));hi2c1.Instance = I2C1; hi2c1.Init.ClockSpeed = 400000; hi2c1.Init.DutyCycle = I2C_DUTYCYCLE_2; hi2c1.Init.OwnAddress1 = 0; hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT; hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE; hi2c1.Init.OwnAddress2 = 0; hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE; hi2c

Hi, Using references from 1) STML496 UART Wake up from Stop Example - https://github.com/STMicroelectronics/STM32CubeL4/blob/master/Projects/NUCLEO-L496ZG/Examples/UART/UART_WakeUpFromStop/Src/main.c#L78 2) STM Getting started with PWR Guide - https://wiki.st.com/stm32mcu/wiki/Getting_started_with_PWR#Stop0.2C_Stop1.2C_and_Stop2_modesI have the following code that tries to wake up from STOP1 via UART.   /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ HAL_Init(); /* USER CODE BEGIN Init */ /* USER CODE END Init */ /* Configure the system clock */ SystemClock_Config(); /* USER CODE BEGIN SysInit */ /* USER CODE END SysInit */ /* Initialize all configured peripherals */ MX_GPIO_Init(); MX_I2C1_Init(); MX_UART5_Init(); /* USER CODE BEGIN 2 */ HAL_PWREx_EnableLowPowerRunMode(); /* USER CODE END 2 */ __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(RCC_STOP_WAKEUPCLOCK_MSI); /* make sure that no UART transfer is on-going */

Hello STMicroelectronics CommunityI am facing issues in configuration of ST25R100 chip with STM32C031C6T6 microcontroller in STM#@cube IDE. I am using default configuration settings but still facing trouble in initialization.Can anyone in here who is helping me in configuration of ST25R100 chip with STM32C031C6T6 microcontroller or any other stm32 microcontrollers.@stm32 Thanks,Hitesh Pandey

Hi I'm trying to setup TLSv1.3 using STM32H63 Nucleo board. I followed the steps in https://github.com/eclipse-threadx/rtos-docs/blob/main/rtos-docs/netx-duo/netx-duo-secure-tls/chapter3.md to enable TLSv1.3 in STM32CubeMX. But all I get from the OpenSSL server is:     ssl.SSLError: [SSL: NO_SUITABLE_SIGNATURE_ALGORITHM] no suitable signature algorithm (_ssl.c:1006)     How do I solve this? I checked with the debugger and I can see that this code gets hit     #if (NX_SECURE_TLS_TLS_1_3_ENABLED) if(tls_session->nx_secure_tls_1_3) { /* Send supported TLS versions extensions (for TLS 1.3). */ status = _nx_secure_tls_send_clienthello_supported_versions_extension(tls_session, packet_buffer, &length, &extension_length, available_size); if(status != NX_SUCCESS) { return(status); }     Using wireshark I can see that clienthello from the client     Frame 243: 250 bytes on wire (2000 bits), 250 bytes captured (2000 bits) on int

(originally a reply to https://community.st.com/t5/stm32cubeide-mcus/retarget-printf-on-stm32g070rbxx-cortex-m0/td-p/720883) Hi @Andrew Neil,For the scanf do we need to make any other change?My read function is-  int _read(int fd, char *ptr, int len){ (void)fd; int i; for(i=0;i<len;i++){ *ptr++ = uart_read(); } return len; }  In the terminal window it is not taking any keypress.

Dear STM32 Community, I am currently working with the STM32H747XIH6 board and encountering an issue where programming and running the target fails, even though the simulation in TouchGFX works perfectly. Here are the details of my setup and the problems encountered: TouchGFX Integration: I created a new TouchGFX application with a text area widget and wildcard entry. The code generation and simulation are successful, but when I attempt to program and run the target, I receive the error: "Program and Run Target Failed." STM32CubeIDE Integration: I have integrated TouchGFX code into STM32CubeIDE, including a new variable and functions for incrementing numbers. This code runs correctly within STM32CubeIDE, but programming and running the target still fails. Additionally, I have merged FDCAN code into main.c and configured pin and clock settings. Debugging both the CM7 and CM4 cores shows no errors, yet I am still encountering the same issue.

Hi,I have recently purchased a NUCLEO-L552ZE-Q and I am trying to program it using the STM32CUBEIDE but it will not program. I get the following in the console: Starting server with the following options: Persistent Mode : Disabled Logging Level : 1 Listen Port Number : 61234 Status Refresh Delay : 15s Verbose Mode : Disabled SWD Debug : Enabled InitWhile : Enabled Waiting for debugger connection... Debugger connected Waiting for debugger connection... Debugger connected Waiting for debugger connection... Shutting down... Exit. The microcontroller has to then be reset manually but it isn't programmed and the default led cycle program runs.Am I doing something wrong? I have had another nucleo board working just fine, the F767 I believe. Thanks

Hi, I just got my board STM32L552 and currently am setting up development environment for it. I'm testing the board with an example project 'CORTEXM_InterruptSwitch_TrustZone' and the code works well, however, I'm not able to set breakpoints for debugging. To be more specific, I can set breakpoints but the firmware doesn't stop at it. I've already checked through some ways to solve this issue like 'Checking Run --> Skip All Breakpoints' but that wasn't my case.  Could you please tell me what I'm missing? And please let me know if any screenshot is needed. Thank you in advance. Best regards,Tae Hyun Kim

hi, I have developed applications using STM32WL base on NUCLEO-WL55JC1.  But I found when enter CAD there is a long time block on SUBGHZ_WaitOnBusy(). About 1.2ms.it’s so long than I thought   I found a issue in GitHub:https://github.com/STMicroelectronics/STM32CubeWL/issues/70 When SUBGRF_SetTx() or SUBGRF_SetRx() is called, it blocks for a long time (~1.2 ms) until the BUSY line goes low. The blocking delay is in HAL_SUBGHZ_ExecSetCmd() where SUBGHZ_WaitOnBusy() is called after the SET_TX (0x83) or SET_RX (0x82). what can I do for avoiding this issue? Thanks

I think the word "reproduced" should not be used in this yellow marked sentence,and the word "resolved" should replace the word "reproduced"，due to the purpose of NRST pin is to solve the most of common failures,not to reproduce them。 Am I right?

Hi,I am currently working on a BLE module using the ST STM32WBA55UGI6 MCU. While I am able to read the MCU through STM32CubeProgrammer, I am encountering issues when trying to perform BLE RF tests using STM32CubeMonitor-RF.Could you please advise which firmware files need to be programmed to enable BLE RF testing? I have downloaded various projects from GitHub, but none of them have resolved the issue.Thank you for your assistance.

Hi, I was just wondering if someone could spot why my code could be failing when my CheckMBMode function is being called in my main loop. I am successfully opening a security session before reading and writing to the MB Mode register so I am unsure what I am doing wrong.Code:#define ST25DV_I2C_SYST_ADDRESS 0xAE #define MB_MODE_ADDRESS 0x000D // MB_MODE register address (for enabling FTM)// Function to read and check the status of MB_MODE (FTM status)HAL_StatusTypeDef CheckMBMode(uint8_t *reg_value) {// Read the MB_MODE register (1 byte, 8-bit register)return HAL_I2C_Mem_Read(&hi2c1, ST25DV_I2C_SYST_ADDRESS, MB_MODE_ADDRESS, I2C_MEMADD_SIZE_16BIT, reg_value, 1, HAL_MAX_DELAY);}Thanks.

I want to test the code to handle SRAM2 parity errors, is there any way to force a parity error to test the code?When a write is made the 36 (32+4) bits are updated, is there a way to update only the 32 bits or the 4 parity bits?Or is it possible to deactivate parity check, write a value to SRAM2 (in this case it will not update the 4 parity bits, right?), activate parity check and then read the memory position?Thanks!Fernando

I'm trying to use st-link v2 to program an STM32L010K4, but the stm32cube programmer doesn't identify this microcontroller (Error: No STM32 target found). The st-link is working, because I can program another STM32 without any problems. I appreciate your opinions.

Description:I am developing a library for an STM32H755-based project, where the library is responsible for controlling LEDs via `HAL_GPIO_WritePin()`. The library needs to be core-agnostic and should work when linked into both the CM4 and CM7 projects. However, I’m encountering an issue with the inclusion of the `stm32h755xx.h` header file. stm32h755xx.h is included by stm32h7xx.h when STM32H755xx is defined in stm32h7xx.h which is a requirement.The `stm32h755xx.h` file requires either the `CORE_CM4` or `CORE_CM7` preprocessor directive to be defined, as it contains core-specific definitions and includes (`core_cm4.h` or `core_cm7.h`). Since the library is being built independently, it does not know ahead of time whether it will be used in the CM4 or CM7 project. The core definition (`CORE_CM4` or `CORE_CM7`) is specified in the main project but is not known during the library build.My goal is to have a single library build that can be linked into both the CM4 and CM7 projects wit

Hello,I'm trying to disable temperature compensation on the lps22hh sensor, does anyone know if there's a specific register i can manipulate? Thanks!

Hi Sir, Can the LPS27HHW be used to detect non-water liquids, such as oil?  

We reported the following error during the "optimize" step of generating an ONNX model: (ST Edge AI Core v1.0.0-19894  NOT IMPLEMENTED: Unsupported layer types: ScatterND).How to solve this issue? Is there any function or tool that can replace ScatterND? 

I am trying to run AcousticBF (Beamforming library v3.1.0 from XCUBE_SMARTMIC_V2.4.0 pack) on STM32H747 development board, but on the output I get only a tone signal, and no audio hearable from Mics. - The inputs are two PDM mics, and the PDM signal is converted to 16kHz, 16bit PCM audio by PDMFilter library. Audio quality for both audio channels are good, when Beamformer is switched off. - When I enable Beamformer I get only a signal tone in the output stream. (Signal tone means a 3kHz sinusoid signal, with a side lobes on 1.5kHz and 4kHz).- Reference output signal is also filled with the same signal tone.- I tryed to work with a precompiled library, and with own compilation of sources, too. Own compilation of sources, generates many warnings, e.g. warning: 'libBeamforming_setConfig' defined but not used [-Wunused-function]But I think it is not a problem, and a linker can found the function. The problem is static declaration of function, and this function is called