Solved

Hello everyone,Since about yesterday afternoon, I cannot see any application template and UI template (except for simulator on PC) when I want to create a new application on TouchGFX. A red icon has appeared next to "Create new application" that says: Package server at http://packages.touchgfx.com/V2/packages.json.zip can not be reached. No online package can be found. You can continue working but only already installed packages are availabe. The remote server returned an error: (403) ForbiddenIs this happened to anyone else ? If so, how can I fix this issue ?Thanks in advanceTristan

I'm using stm32l476jgy6 MCU, it has 3 SPI busses, I'm using all of 3 SPI busses for different peripherals. If peripheral on SPI1 fails to communicate with MCU, will it cause any effect on other SPI busses? I've a scenario where I'm using BLUENRG-MS on SPI1, lsm6dsm and lsm303agr sensors on SPI2, external SPI flash on SPI3. all of these peripherals are not working, but when lsm303agr removed from the board, rest of the components started communicating to MCU. there is no code blockage, controller is running continuously. I'm using Sensor tile as a base hardware design, ALLMEMS as a base firmware.Need help understanding the issueThanks

Good morning.I am using the STM32446E-EVA board.I want to read data about video from CAMERA through serialI am not sure where it is because it is the DMA part.In order to read CAMERA data, which function part can we know by reading the value in part???It seems to be of great help.Thank you.

Hi,due to size of project, i would like to know if there is some plugin to distribuite compilation over more cores like Incredibuild does on visual studio or is it possible, meaning it is supported to develop for stm32 under visual studio.Even other suggestions about distribuited compiling to speed up the process.Regards

(edited this post from previous panic language; still think its good to keep it around - and a suggestion: there should be a tag/category for "Community Website")Well, since ST asked me to register for downloading software, I thought I'd be honest, and enter my real name ... however, I experienced something unexpected, that felt as if ST wanted to doxx me!So, after registering on st.com, I register for this forum - and when I check the profile settings, the real name (that I entered originally) is nowhere to be found: I cannot see my real name anywhere there ... So I guess, if I cannot see my real name in the forum profile settings - then it will not figure anywhere in the forum, right? But, then I check the forum overview, and what can I see - my real name sitting there: Even worse - after this, I logged to st.com, changed my name there, logged off, logged back in - st.com did NOT show my real name anymore - but this forum still did!So, I thought - how could I get my real na

This is somewhat similar to OpenSTM32 Community Site | Phantom Breakpoint - except in STM32Cube IDE.I have managed to create a reproducible example. I use MSYS2 on Windows 10, so excuse the bashisms.$ systeminfo ... OS Name: Microsoft Windows 10 Home OS Version: 10.0.19042 N/A Build 19042 OS Manufacturer: Microsoft Corporation OS Configuration: Standalone Workstation OS Build Type: Multiprocessor Free ...   $ cat /c/ST/STM32CubeIDE_1.6.1/STM32CubeIDE/.eclipseproduct name=STM32CubeIDE id=com.st.stm32cube.ide.mcu.rcp.product version=1.6.1First, creating a fresh directory for a workspace:$ mkdir /c/tmp/temp_workspaceStart "clean slate" STM32CubeIDE, with this directory as a workspace:$ /c/ST/STM32CubeIDE_1.6.1/STM32CubeIDE/stm32cubeide.exe -clean -clearPersistedState -data /c/tmp/temp_workspaceClick "Start new STM32 project". From the Target Selection wizard, I go to Board Selector, choose NUCLEO-G071RB, -select the board, Next. Project name: my_nucleo_proj, keep the rest at defaults

Hi,I'm working in a project that contains large data need to be processed by using stm32f407 Disc1. I facing issue with RAM overflow so, I need to use external ram by using FSMC.what is the large size of external ram that I can use it? , Is this external ram is used as internal one? and when I define and declare an array, Is this array will be stored automatically into this ram ?Thanks....

Hello,I am using STM32L4S9 and the datasheet mentions the LSI is 32khz. Is this 32000hz or 32768hz? Best,Jeff

Hello, Is is mandatory to add inter measurement period function when I use the function Timing budget

Hello!Hello everyone, recently there is a need to use stm32f429 hardware I2C as a slave, debugging a few days without normal communication, want to find a demo reference​thanks​

..

Hi, I am trying to setup the Hightec toolchain in the SPC5Studio. I got the license error as shown in the image. Can someone help me to figure this out, as this is the first time I am using SPC5Studio. I followed the steps given in the Hightec website, and still got the same result.

This is less of a question and more of a statement for your information. I was not able to install the v1.6.0 update and have just been ignoring the notifications for a while, so when I saw that v1.6.1 was available I thought I'd try that but it still fails. I've attached a screenshot of the error output. There were many more rows but all to the same effect.Also I am on macOS Big Sur 11.0.1 and my current version of CubeIDE is v1.5.1.Thanks!Matt

On a dual core project created with the configuration tool(STM32CubeIDE Version: 1.6.0) in the IDE project explorer there is a folder with path: /LedFlash1_CM7/DriversLocation: C:\folderA\flolderb\LedFlash1\CM7\DriversThis IDE folder only contains Linked files (as set up with MX)There is an empty folder also created on the system "C:\folderA\flolderB\LedFlash1\CM7\Drivers" If the empty "Drivers" folder is deleted STM32CubeIDE will not be able to open the linked files and can no longer build the project.The project is under version control(git) and git does not version control folders so the folder can be deleted (eg when clean is called). It seems strange that an IDE stores its project settings using windows folders(empty).Can the project be configured to not rely on empty folders?

--------EDIT: I added a minimal example project, 2 posts below.--------Using the WWDG on STM32L07, because I need the EWI interrupt it offers to prevent the reset in certain situatons.(Edit: orig. config code + some obsolete explanation removed. The minimal example 2 posts below is more readable)APB1 is at full 32MHz, which should, using max prescaler and WWDG:CR:T bits, yield a timeout of ca. 65ms.I am setting the window low value same as refresh - according to the manual, figure 192, that should make the "refresh allowed" part the largest possible. I don't need/want a lower bound.Refreshing the counter regularly in much less than that time.Now, yet, I see a constantly resetting MCU.

However I've installed V1.26.0 Pack before, but when I try to update it to 1.26.1 version i get the following error message during installing V1.26.1 Patch: Problem during load of selected FileMissing dependency for this package.-STM32Cube FW_F4 V1.26.0

Hi Folks,I am trying to explore the USB Host feature for STM32 can offer, I am using STM32F769I-Discovery kit for prototyping. I was trying to find any template for reference on TouchGFX Designer default templates but could not find.Can someone help me please? If this request is too general, I am thinking to start by an application in which the device can detect when an USB flash drive plug in and then I can write and read data to the USB flash drive.

cubeMX version:6.2.1, STM32L4R9ZIT can select RGB interface,but STM32L4RVGT cann't​

The typical values of the:- Sensitivity tolerance of the accelerometer- Cross-axis sensitivity/non-orthogonality of the accelerometer and gyroscope- Non-linearity of the accelerometer and gyroscopeI could not find those in the datasheets.Thank you in advance.

Hi, I am not sure if this is the right place to ask this question.We are building a new product which requires NFC read/write support, we narrowed our options to one of 2 chips st25r39x and another nxp chip clrc663.Is there any advantage of using the st25r3911b or 3916 over using clrc663?We know that clrc663 support natively crypto1, hence we can read and write on widely used mifare classic cards, and of course it will have native support to all other nxp tags such as Ultralight or Desfire, so another question does st25r39x support read/write functionality to desfire and ultralight?

(sorry for my bad English)​Hi, My project is base on STM32F469 ,LCD use DSI video mode.Now I can show pixels in TouchGFX box , but can not show images.​Touchgfx project with images:​display like this：​touchgfx project with image&pixel：​display like this:​the Images in touchgfx is seted as RGB565.LCD controller is seted in RGB565 mode.And DSI,LTDC,LTDC layer,DMA2D both are in RGB565.​Why do I have this effect?How can I fix it？Thanks.​

 

저는 현재 STM32F410CBT3 모�?�로 개발중�? 있습니다. ​FLASH MEMORY MT25Q128 모�?��?� SPI로 연결하여 메모리를 사용하려고합니다.​MT25Q128 메모리�? 1M�?�기�?� �?��?�터를 저장하고 싶습니다. ​방법�?� 있으면 알려주시기 바�?니다. 내부 RAM�?� �?�기가 작아서 1M사�?�즈�?� �?��?�터를 넣�?�수 있는 방법�?� 모르겠습니다.​빠른 답변 부�?드립니다. ​

So I bought STM32F769 Discovery Board for prototyping. In BoardOverview doc states the demonstration source code could be found in www.st.com/stm32f7-discoveryBut I could not find it there, it only provide the compiled binary which is not much of a help. I would like to use the source code as reference.

I am using STM32CubeIDE with a STM32L471VET micro. I have included the MotionFX library and have 9DOF orientation output working, but I can't seem to get the magnetometer calibration completed. It continuously shows: MFX_MAGCALUNKNOWN even after 5 to 10 min of rotating my development board around at every conceivable angle even making figures of 8 does not seem to work. I have followed the MotionFX documentation carefully. I hope there is someone out there that has got this to work successfully. If so please help me to get the calibration working.