Solved

..

I am trying to use the windows version of STM32_Programmer_CLI.exe (version 2.13.0) to write bytes to a flash (windows 10). The command I am using is like./STM32_Programmer_CLI.exe -c port=SWD mode=HOTPLUG -w8 0x08080000 0x00 0x00 0x00 0x00 0x00 0x00 -w8 0x08080C00 0xAA 0x00 0x00 0x00 0x00 0x00 -vand although I use the "mode=hotplug", each time I run this command a restart is triggered. I did expect no restart when using "mode=hotplug". Can I try something else to be sure to avoid a restart/reset?

Hello,I followed a tutorial on how to generate a SINE wave using DAC and DMA that was really good. Logically it makes sense, you set up the DAC, set it to be triggered by a timer, then set up the DMA channel, set it to circular, and set it to use a table of values. Start the time and the DAC DMA, should work, right? Not working for me unfortunately, no output on the PIN PA4. Here are some screenshots of my CubeMX and a snippet of my MAIN Code:/* Private user code ---------------------------------------------------------*//* USER CODE BEGIN 0 */#define NS 128uint32_t Wave_LUT[NS] = {  2048, 2149, 2250, 2350, 2450, 2549, 2646, 2742, 2837, 2929, 3020, 3108, 3193, 3275, 3355,  3431, 3504, 3574, 3639, 3701, 3759, 3812, 3861, 3906, 3946, 3982, 4013, 4039, 4060, 4076,  4087, 4094, 4095, 4091, 4082, 4069, 4050, 4026, 3998, 3965, 3927, 3884, 3837, 3786, 3730,  3671, 3607, 3539, 3468, 3394, 3316, 3235, 3151, 3064, 2975, 2883, 2790, 2695, 2598, 2500,&n

HelloI use STM32U575 to run some tests for my company, I have used S26KL512S in automatic status polling mode but it seems that it does not work with the hyperflash octal memories.Is there any example on this mode with other memories with the same MCU?Thanks.Alexi.

HelloI use STM32U575 to run some tests for my company I have used some octal memories before but I have an issue with the Infineon S26KL512S memory it is not working, unfortunately I am not even able to read or write on the memory is there any example on this board? Any help please ? Alexi.

Cannot find LL_FLASH_ErasePage or LL_FLASH_WriteHalfWord ! Where I can find this ?Adam

Hi, in my application I will not use INT2 pin. Is it okay to connect INT2 pin to the GND?

I have imported an STM32 project, created and debugged in the past using STM32CubeIDE. When I try to build this project in VSCode I see:Executing task: Build build task started...."C:\Program Files\CMake\bin\cmake.EXE" --build "D:/DataRoot/Projects/IO Technologies/IHP Controller/build/debug/build"The parameter is incorrectCMake Error: Generator: execution of make failed. Make command was: && build finished with error(s).No changes were made to the imported project.Please advise how to proceed.Sid

I am using the following code to write data to flash memory:#include "stm32f4xx_hal.h"#include "stm32f4xx_hal_flash.h"#define DATA_SIZE 4int main(void){   uint32_t data[DATA_SIZE] = {0x12345678, 0x90ABCDEF, 0xDEADBEEF, 0xCAFEBABE};   uint32_t address = 0x08000040; // Starting address of sector 0   HAL_Init();   HAL_FLASH_Unlock(); // Unlock flash   // Erase sector 0   FLASH_Erase_Sector(FLASH_SECTOR_0, FLASH_VOLTAGE_RANGE_3);   // Write data to flash   for (int i = 0; i < DATA_SIZE; i++) {       if (HAL_FLASH_Program(FLASH_TYPEPROGRAM_WORD, address, data[i]) != HAL_OK) {           // Handle write error       }       address += sizeof(data[i]);   }   HAL_FLASH_Lock(); // Lock fla

I have a complex GUI that has many custom containers displaying information. This information shall be updated at specific perios to avoid confusing the end user. For example the voltage shall be updated every second while the frequency shall be updated every 200msCurrently my custom containers have the following code which updates the values every 16ms and depends on the refresh rate of the screen.void MyCustomContainer::initialize() { MyCustomContainer::initialize(); /* Register tick functions */ Application::getInstance()->registerTimerWidget(this); }   void MyCustomContainer::handleTickEvent(void) { /* ... get value () */ /*... update text gui() */ }I could add to every widged something in the lines of (pseudo code):void MyCustomContainer::handleTickEvent(void) { static uint8_t counter = 0; if (counter >= SOME_VALUE { /* ... get value () */ /*... update text gui() */ counter =0; } else { counter ++; } }...or make the parent widget in charge of handling the u

..

Hello, I am trying to create a simple openthread project on my NUCLEO-WB55RG. There is no custom code in this project; just the code generated from the CubeMX ioc file attached.By all means, I think that I have all the necessary settings for this project selected in the IOC file (attached), but "SHCI_USER_EVT_PROC" task never finishes, and instead hangs on SHCI_C2_Thread_Init(). Am I doing something wrong?

 JW

I can make the RTC wakeup work in Standby mode, but not STOP2 mode.

When i init UCPD ,the function USBPD_CAD_Init returns NO OK,then i try to find what is CAD,could you tell me?thanks

I generated my code by stm32cubemx,version6.1.2， and use ucpd2 as sink&dead battery,. But got USBPD_ERROR in USBPD_DPM_InitCore after execute " CHECK_PE_FUNCTION_CALL(USBPD_PE_Init(USBPD_PORT_0, (USBPD_SettingsTypeDef *)&DPM_Settings[USBPD_PORT_0], &DPM_Params[USBPD_PORT_0], &dpmCallbacks));"Changing stack size is useless；any other solution？thanks.

My rgb lcd screen does not display。​My board is based on the STM32MP153AAA3 design, using a separate power supply.​This is my schematic diagram​This is the timing of the LCD​ This is the LCD device tree ​This is some panel-simple driver code​Here are some boot logs Looking forward to your response!

We use dev. kit: ANT7-T-ST25DV64KC with app version: ST25NFCTap version V3.7.0 / ST25SDK: 1.10.0 public version. Q: I try to write binary data from file to it. I succeed in sending 4096 bytes. But when I try to send larger files it fails (tried 8192 bytes) with the error message:Error while writing data:com.st.st25sdk.STException: Error BAD_PARAMETERQ: Is this a known issue or am I doing something wrong?

Greetings,in the video STM32MP1 workshop - 9 OpenSTLinux BSP pin Muxing - STM32CubeMX lab after modifying the DK2_TIMER_A7 project in the mx cube directly open the project in workbench from generate code, open the file.On my pc this doesn't happen, this file opens:<?xml version="1.0" encoding="UTF-8"?><workspace>  <project>   <path>$WS_DIR$\DK2_TIMER_A7.ewp</path>  </project>  <batchBuild /></workspace>And if I try to open the project directly from workbench I can't open it.When I open workbench it tries to install GCC GNU COMPILER but failsI attach some screenshots

I need to drive a stepper motor with an X-NUCLEO-IHM02A1 and the related expension package X-CUBE-SPN2 is only compatible with STM32-Nucleo-F072RB, STM32-Nucleo-F302R8 and STM32-Nucleo-F401RE. The problem is that i only have (and need to use) a STM32-Nucleo-L010RB board and i use STM32CubeIDE to develop my application.So, is the X-CUBE-SPN2 package really not compatible with my board or it is only the exemples that have been developped for the 3 specific boards mantionned ? I am very new to these and i don't know how i could set my own exemple to work on my STM32-Nucleo-L010RB board. So if you have relevant links, it would be much appreciated.

Hi there. Before attempting any password locking on my STM32575, I read the password lock location and it returned all zeroes like soReading 32-bit memory content Size     : 4 Bytes Address:   : 0x400220200x40022020 : 00000000After setting the PW, it now returns non zero like soReading 32-bit memory content Size     : 4 Bytes Address:   : 0x400220200x40022020 : 000C0000I've tried disabling the PW, writing to all zeroes and writing it to all FFs, but I can't get back to the point where all zeroes are returned. Can you advise how to get to that state?thanks in advancePaul

Hi fellas,We are planning for LoRa based FUOTA updates using STM32 MCUs. The LoRa Transceiver we are planning to use is SX1302. In I-CUBE-LRWAN blog, they told its meant for STM32L0/1/4 series alone. Can we use some other series like STM32G0 series, for cost reasons? If not, what is the actual reason for it? As STM32G0 also has SPI interface, which can be interfaced to our Transceiver. Also, as another hiccup, SX1302 has only HAL support, which works in Linux based Processor and no implementation idea has been given in terms of Controller? Any suggestions regarding that?

I recently upgraded from StM32CubeMX 6.6.1 to 6.8.0. The coloring of the TABS in Configuration are switched from darkblue and lightblue to something gray( hard to see).Is there a way to change it back?

I use H743I Eval2 board , able to build application with TouchGFX to display data. I am trying to activate ETH with lwip middleware with CubeIDE. have enable CORTEX_M7 (Icache,Dcache) but can not select any mode (MII, RMII) in ETH, (a forbidden mark is showing) ,as result, lwip is also unable to select. please advice, thanks