About RLD

RLD · 2024-09-15

Hi,Here is my problem, I need to output two different frequencies on one pin and I can't reconfigure the timer to new arr/psc values for a different frequency because these timers also output the frequency on other pins where the frequency/timer conf...

RLD · 2024-08-21

Hello, my problem is as follows:I am working with an STM32G484QET6 uC. I have configured two timers with two output channels as Output Compare Toggle Mode. So that I get two independent quadrature signals.I now want to synchronise these two quadratur...

RLD · 2024-08-12

HiI am working on a STM32G484QET6 uC. On a timer I have configured two output channels with Output Compare Toggle Mode. So that I get a quadrature signal.When configuring the first value, everything works perfectly. The duty cycle is 50% and the phas...

RLD · 2024-09-16

Thank you!Its correct, I am talking about PC2.In my configuration, TIM1_CH3 runs on Output Compare Toggle and TIM20_CH2 on PWM Mode 1.Do I have to stack these two alternate functions on this pin?or do I have to configure the timers as non output, and...

RLD · 2024-09-16

Thank you!I have already checked that in advance.My pin has TIM1_CH3 and TIM20_CH2. So that should be possible.But I have my struggles with reconfiguring, aka with the “moder bits”. I'm pretty new to this and have never worked with them before, I cou...

RLD · 2024-08-22

Yes, that would be the simplest solution, but unfortunately I have to use two timers because I also have to control the quadrature signals individually (frequency, duty cycle and phase shift). And that wouldn't be possible with one timer, as it can o...

RLD · 2024-08-22

Alright, the output speed is not such a problem for me, but I will have a look at this option

RLD · 2024-08-22

Thank you very much, that worked, the leading signal is now always synchronised. However, it now sometimes happens that the phase shift signals are inverted in relation to each other.I think this is due to the same problem as before. I also tried to ...

User statistics

User Activity

two timer signals on one pin

Synchronise 2 independent timers in OC Toggle mode

Phase shift with swapping polarity

Re: two timer signals on one pin

Re: two timer signals on one pin

Re: Synchronise 2 independent timers in OC Toggle mode

Re: Synchronise 2 independent timers in OC Toggle mode

Re: Synchronise 2 independent timers in OC Toggle mode