About Loren

Loren · 2023-12-11

I need to make a change to the library file usbd_hid.c under the Middlewares/ST/STM32_USB_Device_Library/Class/HID/Src directory. I can do this and it changes the local copy, but regenerating the code overwrites the changes I make to it. I don't want...

Loren · 2023-12-06

Greetings, Sorry if I am posting in the wrong place. Maybe someone can point to the correct forum for me.Problem: USB HID 04 Joystick intermittently sends incorrect 12-bit analog data.Micro: STM32F103R8T6Details: A 1/2 Hz signal applied to analog in...

Loren · 2023-12-11

Thank you. I will try the clone method. It may be a little more upfront work, but sounds like a better long-term solution. Thanks!!

Loren · 2023-12-11

Yes, I'll try that, thank you. However, the modified file is also used in other projects. I could do this on a project-by-project basis or it would be nice if this library file could be saved as a custom module that could be substituted for the sta...

Loren · 2023-12-08

Ran without error last night. I'm going to call this thread as resolved for now.I'll run the suggested test of 0x0101...0x0202... tonight as a second verification.Thank you for all your help!

Loren · 2023-12-07

Yeah, that might be a good final check. Right now it has been running for over an hour with triangle waves from my signal generator with no faults.Before it would *** out within 60 seconds. So, at least I understand the why I had the fault. I would ...

Loren · 2023-12-07

Arg! Still did not work. Well, my fault there...I found out that I was accidentally modifying the wrong file from a different project. Not good to be doing two things at once in this IDE.So, letting the this run overnight and see what tomorrow bri...

User statistics

User Activity

Need to Modify a HAL USB Library

Strange USB Behaviors

Re: Need to Modify a HAL USB Library

Re: Need to Modify a HAL USB Library

Re: Strange USB Behaviors

Re: Strange USB Behaviors

Re: Strange USB Behaviors