About mrosing

mrosing · 2016-10-26

Posted on October 27, 2016 at 03:57I have modified the platform.h and platform.c to run on Raspberry Pi. The i2c-tools show I can read the device, and the routine VL53L0X_DataInit() returns no error, so I can write to the device. But I am getting ...

mrosing · 2016-11-14

Posted on November 14, 2016 at 21:23Here is the reply I got from ST support: Resolution Summary: SOLUTION PROPOSED BY SUPPORTER - 14/11/2016 18:03:12 : --------------------------------------------------------------------------------- Hello, VL53L...

mrosing · 2016-10-29

Posted on October 30, 2016 at 03:30 This is good, I finally got the units which were failing with a ''range error'' to work. What I did was modify the StaticInit to always perform the VL53L0X_perform_ref_spad_management() routine. I now have the...

mrosing · 2016-10-29

Posted on October 30, 2016 at 01:00 I have 5 units I can plug into my Pi. 3 of them gave floating point errors, and 2 of them give the range fault error. I decided to chase down the floating point error and found a divide by zero in routine calc...

mrosing · 2016-10-28

Posted on October 28, 2016 at 16:07OK, so my actual problem was the WrByte() routine was not actually sending data correctly over the i2c. Now it does, and I am past this problem and onto a ranging error. But at least the device is no longer hangi...

mrosing · 2016-10-28

Posted on October 28, 2016 at 16:04If this was on DSPRelated I'd punch the ''have a beer!!'' button. I completely agree.

User statistics

User Activity

API timeout in VL53L0X_get_info_from_device()

Re: VL53L0X Register Map?

Re: API timeout in VL53L0X_get_info_from_device()

Re: API timeout in VL53L0X_get_info_from_device()

Re: API timeout in VL53L0X_get_info_from_device()

Re: VL53L0X Register Map?