About OTOMA.2

OTOMA.2 · 2022-05-12

It's a board I've been using for a while, and I'm struggling loading a new stack onto it.Here are the steps I've executed:1/ powercycle2/ start FUS3/ delete image4/ powercycle5/ start FUS6/ get FUS info: FUS_IDLE | FUD_NO_ERROR | Version=1.1.1.0 | st...

OTOMA.2 · 2022-05-20

Wrapping up on that problem, after realising the FUS1.1.1 faulted and delegated the boot below the secure flash limit, I've been able to disable ESE and reload a FUS to make the board work again.After trying on a second virgin board, I succeeded in p...

OTOMA.2 · 2022-05-13

Dear Remy,I've read the page, and while upgrading the FUS, it feils on step 3.1.2 Start FUS:here is a capture of the error withint the STM32CubeProgrammer 2.10.0 (i've tried several times as specified with board reconnection)Best regards,

OTOMA.2 · 2022-05-13

For the record, that thing already happen twice. The first one on a nucleo WB55 with FUS 0.5.3. But I didn't clearly log the actions. So to reproduce, I've bought another nucleo WB55, and performed the test, carefully listing the steps to reproduce.I...

OTOMA.2 · 2022-05-13

Good idea, i've checked, the STM32CubeProgrammer is version 2.10.0 and there does not seem to be any updated version on the ST website.I've checked the STM32WB55 from the nucleo is a 1MB version, therefore the release_note of the copro binaries from ...

OTOMA.2 · 2022-05-12

Actually I've checked, and I don't have any space in the path:/home/user/STM32Cube/Repository/STM32Cube_FW_WB_V1.13.3/Projects/STM32WB_Copro_Wireless_Binaries/STM32WB5x/stm32wb5x_FUS_fw.bin

User statistics

User Activity

Problem loading stack on a nucleo STM32WB55

Re: Problem loading stack on a nucleo STM32WB55

Re: Problem loading stack on a nucleo STM32WB55

Re: Problem loading stack on a nucleo STM32WB55

Re: Problem loading stack on a nucleo STM32WB55

Re: Problem loading stack on a nucleo STM32WB55