About generic

generic · 2011-04-01

Posted on April 01, 2011 at 19:17All: I'm trying to get my STM32Discovery board to talk to a NewHaven LCD display/controller C0220BIZ-FS(RGB)-FBW-3VM via I2C and have encountered some problems. I managed to piece together the following code from var...

generic · 2011-02-25

Posted on February 26, 2011 at 07:30The original post was too long to process during our migration. Please click on the attachment to read the original post.

generic · 2011-02-26

Posted on February 26, 2011 at 23:13Ahh, I figured out the solution to my problem once I nailed down the root cause. In this section of code, I mistakenly declared the inputs from the Tilt sensor as Mode_IPD vs. Mode_IPU. It doesn't make 100% sense ...

generic · 2011-02-26

Posted on February 26, 2011 at 18:48So I had an epiphany. Even without a proper stdout for me to ''printf'' to, I decided to add a line into my ''completed'' program that would flash BOTH LED3 and LED4 if the user button was depressed. This is a sta...

generic · 2011-02-26

Posted on February 26, 2011 at 18:291) The fromelf.exe file is actually in C:\Keil\bin40, not c:\keil\bin. 2) I managed to get the STM32link program to flash the converted AXF file (now a bin) without complaining 3) I confirmed that the rev of my ...

generic · 2011-02-26

Posted on February 26, 2011 at 18:06 Ahh, it looks like there's a command line program to go from AXF to BINc:\Keil\arm\bin\fromelf.exe --bin --output filename.bin filename.axf From http://www.keil.com/forum/9891/ I'll try this and see if it works....

generic · 2011-02-26

Posted on February 26, 2011 at 17:56Clive: Thanks for the reply here. I really don't care what tool I use as long as I can get my program up and running in a ''standalone'' fashion. Toolchain+ST-Link issue: Thanks for the heads up about the bug. The...

User statistics

User Activity

STM32VL-Discovery and NewHaven LCD - request for help with I2C initialization code...

Auto-running program from flash memory after reset vs attached to debugger - not working?

Re: Auto-running program from flash memory after reset vs attached to debugger - not working?

Re: Auto-running program from flash memory after reset vs attached to debugger - not working?

Re: Auto-running program from flash memory after reset vs attached to debugger - not working?

Re: Auto-running program from flash memory after reset vs attached to debugger - not working?

Re: Auto-running program from flash memory after reset vs attached to debugger - not working?