We are pleased to announce you that the official release of STM32CubeMX V6.12.0 is available. What is new in STM32CubeMX V6.12.0?New MCUs/MPUs series : STM32WB0 ,STM32MP25XX and STM32C071XXAdd support new CPNs STM32G4: Add support STM32G4 'Z’ and STM...
Hello,I'm trying to develop an application that use an STM32MP1 Series (STM32MP157A-DK1 for the moment)My application need inter-processor communication between the A7 and M4 CoresI had generated my project with STM32CubeMX and the project is success...
Custom board STM32MP15AABMX Cube version 6.2.1I just switched from v2 of the Distribution ecosystem to v3. After updating MX Cube to work with the latest and re configuring the kernel and device tree files I'm running into the listed issue.I am able ...
Hello everyone, I'm configuring my STM32MP157C-DK2 Board pins and i want to make two SD Card partitions availabe. For the first one i chose the SDMMC1 and attributed it to PC10 pin for the second one do i need to choose SDMMC2 and to attribute it to ...
I try to configure the pins of the MDIOS controler of the STM32MP157C in STM32CubeMX version 6.2.1 . The datasheet states, for pin PA10 -ALT11 the function MDIOS_MDIO. But I cannot select this function for PA10. I also cannot find MDIOS in the device...
I noticed that even if I create a new project using STM32CubeMX IDE for STM32MP157F-EV1 board, in the clock configuration, the MPUSS_CK is 650MHz. In Linux, I can see the CPU frequency is 650MHz only. How can I clock the CPU to 800MHz as supported b...
I use CubeMx creating stm32mp157 device tree. After the 2nd create , the path "CA7->DeviceTree->[My board]->u-boot" always has a file named "<My board>.dts.bak" .modified the Device Tree code in kernel (USER CODE), then push create. The u-boot dts wi...
I want to know the role of the m4_***(for example m4_adc, m4_timers1) node in Cortex-A7 Device tree.When I generate device tree from CubeMX, the m4_*** node are described even if that peripherals are used only on Cortex-M4 FW.Do I need to set statu...
Pin MODE for peripherals are set incorrectly with RSVD instead of correct alternate function definition (AF13).When building uboot it failed because pin Mode "RSVD" is incorrectly defined.e.g code from device tree m4_dcmi_pins_mx: m4_dcmi_mx-0 { ...
Hello,I have started to use the OPENAMP framework, especially with the CubeMX generated file openamp.h to communicate between the A7 and M4.The example DK2_TIMER1_OpenAmp_Solution works fine, but unfortunately the CubeMX generates all the initializat...
I'm attempting to activate I2C5 on I2C_EXT connector CN13 on the board. Prior instructions were to generate device tree code in STMCubeMX. Done that, but something looks weird. All HW documentation and EV1 user documentation indicates that I2C5 is ph...