Solved

Posted on July 17, 2017 at 16:07Hi guys, I've been working with my STM32F405 for over a month now and all of a sudden my chip is unable to be programmed. When I attempt to program my chip using SW4STM32 I get this following error:    Open On-Chip Debugger 0.10.0-dev-00275-gd486ac2-dirty (2017-03-06-15:22)   Licensed under GNU GPL v2   For bug reports, read    https://community.st.com/external-link.jspa?url=http%3A%2F%2Fopenocd.org%2Fdoc%2Fdoxygen%2Fbugs.html   Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD   adapter speed: 2000 kHz   adapter_nsrst_delay: 100   srst_only separate srst_nogate srst_open_drain connect_assert_srst   srst_only separate srst_nogate srst_open_drain connect_assert_srst   Info : Unable to match requested speed 2000 kHz, using 1800 kHz

Posted on August 09, 2017 at 14:01Hello Can i use same memory base address in two dma (dma1 ,dma 2) for transfer date to Peripheral?DMA_DeInit(DMA1_Channel7); DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t) & GPIOA->ODR; DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)BUFFER;DMA_DeInit(DMA2_Channel7);DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t) & GPIOB->ODR;DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)BUFFER;Is it have any problem?

Posted on November 04, 2014 at 12:58 Hello, I'm trying register base interrupt control. But not working.(problem *.s files) I do not want to use to OSAL library. Not starting interrupt. Example Code: //Orhan YILMAZ //Timer Example typedef enum { FALSE, TRUE } BOOL ; void StartupInit( void ); void Port_conig( void ); void WDT_disable( void ); void PIT0_Init(unsigned int TimeOut); void PIT0_Start( void ); //void PIT_0_Handler(void); void Interrup_Enable( void ); #include ''components.h'' #include ''xpc560b.h'' /* * Application entry point. */ unsigned long i = 0; int main( void ) { componentsInit(); //CLK Init. StartupInit(); //WDT Disable WDT_disable(); //Port Port_conig(); //Timer PIT0_Init(0xFFFFF); //IRQ Config Interrup_Enable(); PIT0_Start(); while (TRUE) { if (i == 0xFFFFFF) { //SIU.GPDO[90].B.PDO ^= 1; i = 0; } i++; } } //PORT CONFIGURATION void Port_conig( void ) { //Working Led SIU.PCR[90].B.OBE = 1; SIU.GPDO[90].B.PDO = 0; //Output Low } //PIT0 Initial Functi

Posted on August 10, 2017 at 04:321.The CANConfig structure adds a number of field information,it have a ''fifo_rx_callback'' function point.. Why is there a dialog box in SP5Studio that does not configure fifo_rx_callback?Causes the '' fifo_rx_callback'' function point to NULL2. Building failed when disenable CAN filter.this is a bugYvin.Erwan.001‌erwan.leray@st.com‌simon.scullion‌null

Posted on June 16, 2017 at 08:05I am working on a CAN bus based project on the SPC560P50L5 platform. The project is based on the CAN RLA example included with the SPC5Studio.Details about my setup: SPC5Studio version 5.3UDE debug kit version 4.02.07 (SPC-UDESTK-EVAL license)SPC5-UDESTK JTAG debugger (http://www.st.com/resource/en/data_brief/spc5-udestk.pdf )GNU FreeGCC compiler with VLEMy project code size is way less than the UDE debugger EVAL license limit (i.e. 256kB). The size of my project code is as follows:text    data    bss    dec    hex filename 11630      0   2128  13758   35be build/out.elfWhen I try to flash the program with UDE debugger I get this errorFr 16.06.2017 11:17:21.586, Error, MCUManager, License check for trace stream 'Controller0_NexusTrace' error: no valid license for UDE trace add-on foundFr 16.06.2017 11:17:21.586, Error, MCUManager, Trace str

Posted on August 08, 2017 at 19:47In my code for pwm on timer 2 in stm32F429, I have to use multiple channels (2 at a time). However only my channel 1 pin is giving pwm output. Please advise me what to dovoid enable_gpio1()//setting pin 5 of port a for AF1 which corresponds to timer 2.{ RCC ->AHB1ENR |= RCC_AHB1ENR_GPIOAEN; //Enables port A input output pins by setting the corresponding bit in advanced high performance bus 1 register. GPIOA ->MODER |= GPIO_MODER_MODER5_1; //Configures pin 5 for alternate function mode by setting the corresponding bit in the mode register GPIOA ->OTYPER &= ~(GPIO_OTYPER_OT_5); //Makes the output type as push-pull by resetting the corresponding bit in output type register. GPIOA ->OSPEEDR |= GPIO_OSPEEDER_OSPEEDR5_1;//Makes the output high speed. GPIOA ->PUPDR &= ~(GPIO_PUPDR_PUPDR5);//No pull up or pull down. GPIOA ->AFR[0] = GPIO_AF1_TIM2<<20;//Sets the AF1 bit in the AFRL(AFR[0]) register which links AF1 to pin A5 }voi

Posted on August 07, 2017 at 22:32VPSTX is wired to 3.3Volts.  I want to give it +5V to increase the power.  This changes Rout from 27 ohms to 16 ohms.  I tried using the CR95HF EMI FILTER CALULATION tool to work out component values, without success.As a baseline, I looked at the 3 volt case, since I already had the answer. I opened the tool and found most of the values default to the values on the board.  VPSTX is set to 3 volts and Rin is set to 27 ohms. I had to change Rrx from 0 to 330 and Crx to 1E+12F (infinite capacitor in series).  The result (section 2) was C11 = C12 = 41pF and C2 = 301pF.  That C11 and C12 value is half of the 82pF used on the board.When I changed VPSTX to +5 and Rin to 16, the tool gave me C11 = C12 = 29pF and C2 = 301pF.  I tried 66pF (and lifted L8 so I could connect +5V) and got much worse performance than before.In Summary, what am I misunderstanding about the tool, and what are the correct values for a

Posted on July 27, 2017 at 14:00Hi,I am using a SPC560C50L3 controller on a SPC560BADPT100S MINIMODULE board which sits on the XPC56XX EVB Motherboard. Power supply checked, jtag driver checked. The JTAG used is from PLS USB/JTAG Adapter for SPC5XXX. Using a sample application (CAN application), I could manage to build the code. But from here on, I tried to read the manual to use the JTAG debugger but I could not successfully flash code. Another thing I notice while using UDE STK4.8 version, is the Target names (in Select target configuration) DO NOT match any of the names (name of controller, minimodule or the motherboard). From this what I understand is I do not have a target configuration file, specific to the board in use. How can I solve this?? Any help is appreciated.  #spc5 #pls #spc5-studio #jtag

Posted on August 03, 2017 at 15:47Hello, we bought your 'SPC5 Connect' interface and we would like to evaluate your free software SPC5-FLASHER, SPC5-CONMANAGER and SPC5-CONEXPLORER. We followed all procedure for obtaining the licences, but from mailto:apgtools-license@st.com there has been no answer. Is there some issue? I can give all details, if necessary.ThanksRaku10

Posted on August 07, 2017 at 12:31 Hello, I have the following problem: I have a I2C communication routine that takes about 2ms to be executed. After I do the first read/write operation on a SPI peripheral, the same routine takes250ms the first time, than it stops working becaus isDeviceBusy always fails. If I call __HAL_SPI_DISABLE(&hspi) after using SPI, the I2C routine starts working again as before (takes 2ms again and isDeviceBusy does not fail). So, summarizing: init_all() i2c_routine() // Takes 2ms spi_routine() // i2c_routine() // Takes 250ms i2c_routine() // Stucks�?�?�?�?�?�?�?�?�?�? init_all() i2c_routine() // Takes 2ms i2c_routine() // Takes 2ms i2c_routine() // Takes 2ms i2c_routine() // Takes 2ms�?�?�?�?�? init_all() i2c_routine() // Takes 2ms spi_routine() __HAL_SPI_DISABLE(&hspi) i2c_routine() // Takes 2ms i2c_routine() // Takes 2ms�?�?�?�?�?�?�?�? It seems to be a weird behaviour to me. I've tried a lot of things in the last 2 days, but I canno

Posted on August 08, 2017 at 14:52I'm using STM32F103CB to convert the analog outputs from three polar hall sensors arranged circularly, a magnetic actuator rotates in the center, but I get the voltage value with strange breakpoints, and these happened with a interesting phenomenon which happens with a phase at voltage value of 2048  and I can't explain why, maybe someone had faced this problem, please help and tell me how to solve this.Problem phenomenon: the value from ADC channel will have a breakpoint when it or other ADC channels in ADC channel group at voltage 2048, here are the screenprint with brief: Single channel reading:Tow phases with 60� space?Tow phases with 120� space?Three phases with 60� space:What I tried to solve this: disable DMAchange the hall sensor output voltage amplitudereplaced three F103 chipschanged the rank of ADC channel timesdisable ADC2 and only use ADC1disable ADC1 and only use ADC2dual ADC modeadd more delay in converted interruptionbut

Posted on August 08, 2017 at 22:50Hi, I currently have a CUBEMX project for a STM32F7 LQFP100 chip and I want to create a new project for the pinout equivalent in the STM32H7 series. In CubeMX I can generate a pinout listing from my F7 project as a .csv file but there is no way to import that into a new H7 project. It should be a lot easier than having to re-create the whole project from scratch again.Is there any other way to upgrade a CubeMX project from a chip in one series to a pinout compatible chip in another series?

Posted on August 08, 2017 at 09:35HI,ALL      The stm32F4 DSP lib have FFT /Integral and differential API?

Posted on August 03, 2017 at 13:39Hellowhere can I download the latest SPC5 Flash library?

Posted on July 27, 2017 at 20:20Hiho,we recently updated one of our projects to the newest Firmware package and had to realize that receiving CAN Messages per Interrupt did not work reliably anymore. We were able to track the problem down to the fact that multiple STM32F4 controllers were communicating over the same bus, and when switching on the power supply some RX FIFOs registered an overflow before the messages could be handled.So far we did not find a way to get rid of this problem without modifying the drivers (which would be annoying without end with cubeMX) and reverted to V1.15.0. Does anyone know a nice way to cope with the swich-on overflow while using the HAL_CAN_Receive_IT functions? As they enable the FOV interrupts whenever they are called and the HAL_CAN_IRQHandler automatically disables the interface when a FOV flag is set, we have no clue so far.Cheers,Tobias SchweringBlacbird Technologies UG

Posted on July 24, 2017 at 16:53I am interested to compare the software development tools available for the SPC5 series controllers. How can I manage to do so?? There is a list but it does not weigh the strengths/weaknesses against each other. (I am interested in compiler, debugger, IDE for SPC5xx). #spc5-studio #spc5-automotive-mcus

Posted on August 03, 2017 at 12:26Hi,i'm using Hightec Studio/Compiler an i try to set the PIT for a SPC570s µC. InterruptInstall(IRQ_ID_PIT0_CH0, callback, 1)This function set the following:INTC_PSR226 = 0x8001 and set the Pointer to the funcion 'callback' into the vector table. Now my Problem, everytime when an Interrupt occurrs, the programm crashed. In Debug Window, the Controller stops at: 0x00000010:   FF FF FF FF  Unknown Instruction .It would be nice if anyone could help me.

Posted on August 06, 2017 at 18:48STM32L476-Nucleo board, with jumper wire from PA7 to PA0. Attempting to learn PWM Input Capture.GPIOA->AFR[0]:  0x20007701    00100000000000000111011100000001  PIN  0: TIM2_CH1  PIN  1:  -  PIN  2: USART2_TX  PIN  3: USART2_RX  PIN  4:  -   PIN  5:  -   PIN  6:  -   PIN  7: TIM3_CH2TIM3 free running, no prescaler, ARR 0x7FFF, pulse 0x15.       HAL_TIM_IC_Start_IT(tim_baseHandle, TIM_CHANNEL_1);    HAL_TIM_IC_Start_IT(tim_baseHandle, TIM_CHANNEL_2);yieldsTIM2->CCER:     0x00000020    00000000000000000000000000100000  CC1E   : Capture disabled  CC1P/NP: Non-inverted/rising edge  CC2E   : Capture disabled  CC2P/NP: Non-inverted/both edges  CC3E   : OC1 is not active (OCx=0, OCx_EN=0)  CC3P/NP: OC1 activ

Posted on August 03, 2017 at 20:31Thank you for your patronage. I'm Japanese. I want to use Interrupt Service Routine(ISR) as shown in the picture below. So I want to use HAL_HRTIM_IRQHandler.I wrote the program as shown below, but I got an error. 

Posted on August 06, 2017 at 14:48Hello, forum.I created a simple USB Card Reader with CubeMX but the speed of data transmitting is about 355 kByte/s.I want to improve it but I don't know how.My setup.Board STM32f446RE. CubeMX 4.22. Package STM32Cube FW_F4 V1.16.0.I created the project in the next steps:1) I used CubeMX to generate the project with following modules: internal USB HS, SDIO with DMA, FarFs. Also, I increased heap and stack memory.2) I used sd_diskio's methods in usbd_storage_if to connect SDIO to USB HS. (I use FatFs's BSP driver to provide access to SD Card memory)3) I applied DMA fix from Ripa.Radek.001  <LINK NO LONGER ACTIVE>I tested my project in DMA and Polling mode and get next results:Polling mode(without DMA): read/write speed ≈355 kByte/s, data not corruptedDMA mode: read/write speed ≈355 kByte/s, data can be corruptedAlso, I tested the same project but generated with CubeMX 4.18. Package STM32Cu

Posted on July 03, 2017 at 09:23Hello, Can any one help me with STM32F10X DSP Library, Where and how can I get STM32F10X DSP Library.THANXXXX.

Posted on July 30, 2017 at 12:42 I'm a little confused about the Stack Size, Thumb and Max Depth shown on the file. Which is generated by the ARM Linker. 1. Where could I found the information what these several words exactly meaning? for example: f_open (Thumb, 450 bytes, Stack size 608 bytes, ff.o(i.f_open)) [Stack]Max Depth = 840Call Chain = f_open ⇒ dir_register ⇒ dir_find ⇒ dir_next ⇒ create_chain ⇒ put_fat ⇒ move_window ⇒ sync_window ⇒ disk_write [Calls]>> get_fattime>> st_clust>> remove_chain>> move_window>> ld_clust>> inc_lock>> follow_path>> find_volume>> enq_lock>> dir_register>> chk_lock I know the Max Depth is the Stack needed of the Longest Call Chain. Is that means, for this function, the stack it needed is exactly equal the Max Depth? If so, what about the 'Stack Size'? Is which means the stack size of the current function itself needed? If so, what's the 'Thumb'? Is which means that, 'Thum

Posted on August 04, 2017 at 15:32Hi everyone,I have a weird problem with the powerstep01 on a X-NUCLEO-IHM03A1. I want to change to driver parameters KVAL_HOLD, KVAL_RUN, KVAL_ACC, KVAL_DEC, INT_SPEED, ST_SLP, FN_SLP_ACC, FN_SLP_DEC. All works as expected as long as I use a single board. However, if I use use a stack of three boards in a daisy chain I can only change KVAL_HOLD, KVAL_RUN, KVAL_ACC, KVAL_DEC while the other parameters remain unchanged. All motors are stopped and HiZ.Any help is much appreciated.#powerstep01-stepper-motor-driver #powerstep01

Posted on August 03, 2017 at 22:11The original post was too long to process during our migration. Please click on the attachment to read the original post.

Posted on July 31, 2017 at 16:02Hi,I have a simple question but which causes me a little headache.Does anyone know how I might interface two STM32F7 so that I might obtain the fastest communication between the two?Something better than 10MBytes would be the best and 20MBytes excellent.If my question needs more info do not hesitate to ask for clarification.All help would be appreciated.Thanks#speed #interface #best #fastest #communication #stm32f7