Welcome to the ST Community!

STSPIN32G4 MCP Protocol Get Register Oddities

VasalicVisitor

STM32 MCUs Motor control

I’ve noticed that the order of the registers seems to matter. I would like an explanation as to why this is the case and if there is anything documented on this front.Specifically if you want to request the following registers: 25, 89, 1425, 2649, 70

Srikanth1Associate III

STM32H745XI – HAL_Init() hangs in HAL_Delay() during debug

Hi,I am working on a custom board using STM32H745XI MCU.I am facing an issue on one particular board.The same source code works correctly on our other boards with the same MCU and hardware. On the problematic board: The firmware can be programmed su

977

3 hours ago

TallMikeAssociate II

STM32H750IB crashing and cannot be connected to or halted with JTAG debugger

I’m running into a ‘Heisenbug’ crash (just adding or moving a bit of general code between builds makes it either crash or work), and when it crashes, the STLINK-V3MINI can’t attach, or if already attached, it fails to halt the processor.Any tips or a

634

4 hours ago

vatsalAssociate

STM32CubeMX2 (MCUs)

USART1 receives garbage data at 1.5 Mbits/second or Higher (STM32C542RC)

Hi Team,I am using the STM32C542RC on the STM32C5 Nucleo-64 board (MB2213),What is the max. supported baud rate for the USART baud rate?We have checked that, with STM32CubeMX, the DIV1 prescaler, and oversampling by 16, the maximum supported USART ba

2097

5 hours ago

NicRobertsSenior III

STM32CubeIDE (MCUs)

Projects not importing CubeIDE 2.0

I open up CubeIDE, select a workspace, click “Import projects” the project explorer tab (excuse the typo) There is project there, But nothing appears in the Project Explorer,

171

isaacthornVisitor

What are the barrel jack sizes for the STM32G081B-EVAL board?

Evaluating the STM32G081B-EVAL board, and I’m struggling to find the sizes of the two DC barrel jacks on the board and UCPD daughter board (5V CN16 and 19V CN3). As I understand it, it would be sufficient to power CN3 and let that power the mainboard

131

gp2026Visitor

STM32F429I-DISC1 SDRAM - one exact bit always comes back wrong when I read data back, no matter what I change

Board: STM32F429I-DISC1 (the official ST discovery board), using its onboard SDRAM chip (IS42S16400J-7TLI, 8MB)Framework: Zephyr RTOS 3.7.0What I'm trying to do:This board has a small TFT LCD screen attached to it. I'm trying to display an image/text

121

Forum stuck on 'Please wait for your files to be uploaded'

Andrew NeilSuper User

Feedback forum

Nothing happened for ages; no animation of the ‘Create’ button.I gave up, did a select-all and copy-paste to a new post in a new tab.That one worked fine: Back at the original (still stuck “waiting”), I hit refresh, and it just went back to a blank

732

FReeRTOS TrustZone enable CubeMX v.6.18.1

Fin95Associate II

STM32CubeMX (MCUs)

Hello, I was trying to solve the issue of this ticket: But, as you can see on the image that I am sharing, I cannot change the FreeRTOS type zone. How can make my project work?

201

Is there any difference in the manufactory process in building different chips in the same series

Roland12Visitor

STM32 MCUs Products

I would like to ask if there’s any major differences when making the chips in STM32G4 series, like the STM32G441 to STM32G473 for example

312

STSPIN32G4 MCP Protocol Get Register Oddities

VasalicVisitor

STM32 MCUs Motor control

Srikanth1Associate III

STM32H745XI – HAL_Init() hangs in HAL_Delay() during debug

977

3 hours ago

NicRobertsSenior III

STM32CubeIDE (MCUs)

Projects not importing CubeIDE 2.0

I open up CubeIDE, select a workspace, click “Import projects” the project explorer tab (excuse the typo) There is project there, But nothing appears in the Project Explorer,

171

isaacthornVisitor

What are the barrel jack sizes for the STM32G081B-EVAL board?

131

gp2026Visitor

STM32F429I-DISC1 SDRAM - one exact bit always comes back wrong when I read data back, no matter what I change

121

Forum stuck on 'Please wait for your files to be uploaded'

Andrew NeilSuper User

Feedback forum

732

FReeRTOS TrustZone enable CubeMX v.6.18.1

Fin95Associate II

STM32CubeMX (MCUs)

Hello, I was trying to solve the issue of this ticket: But, as you can see on the image that I am sharing, I cannot change the FreeRTOS type zone. How can make my project work?

201

JMarq.1Associate III

USBH_HID_SetProtocol() protocol parameter

Hi,I am using my own board based on an STM32F207ZG and STM32F2 HAL v1.9.4.I implemented an HID Host using STM32CubeIDE (v1.19.0), simply selecting USB Host and HID class support in CubeMX and generating the code.I was able to read key events from a s

457