Reference design for STM32F042G4?

[sseveelavanan9]

Posted on April 20, 2016 at 16:42

Hi, 

New STM32. Im doing a design involving STM32F042G4. Is there a reference design for this IC? I have found - 

http://www2.st.com/content/ccc/resource/technical/document/application_note/c9/19/d7/b8/6b/0e/4c/d3/DM00051986.pdf/files/DM00051986.pdf/jcr:content/translations/en.DM00051986.pdf

-

http://www2.st.com/content/ccc/resource/technical/document/user_manual/e3/0e/88/05/e8/74/43/a0/DM00231744.pdf/files/DM00231744.pdf/jcr:content/translations/en.DM00231744.pdf

    - which has a schematic For sure there's not much going on, but wondering if I'm missing anything when navigating the ST website.cheers

[Tesla DeLorean]

Posted on April 20, 2016 at 17:35

You should read the Data Manual fully, and review the Reference Manual.

The DISCO, EVAL and NUCLEO boards can be a good guide, but the requirements and pitfalls are in the Data Manual.

[Walid FTITI_O]

Posted on April 20, 2016 at 17:43

Hi chendy,

You find Also the following document that can be helpful for you:

http://www2.st.com/content/ccc/resource/technical/document/application_note/91/66/2d/8c/f9/b5/47/55/DM00089834.pdf/files/DM00089834.pdf/jcr:content/translations/en.DM00089834.pdf

http://www2.st.com/content/ccc/resource/technical/document/application_note/a2/9c/07/d9/2a/b2/47/dc/CD00004479.pdf/files/CD00004479.pdf/jcr:content/translations/en.CD00004479.pdf

-Hannibal-