Solved

In ST Edge AI Developer Cloud I generated the C library of a ST_LSM6DSO16IS_ispu_wand_dataset with platform selected as ISPU. I got many library files in which the major APIs are in the network.h and its c file. I need an API manual or documentation to apply this in tho my program or an example of implementation is enough.

I have 2 different projects, different folders, different *.ioc files (project1 and project2)But one of them is related to other one.When I open the project1, the project2 is opens automatically.After that when I closed the project1, the project2 can remain open (I can close manually).If I close the project2 while project1 is open, then project2 automatically opens itself again.What is the relation beween them I did not resolve it. I have many other proejcts on the "Project Explorer window", there is no problem with themI am using the latest versionVersion: 1.16.0Build: 21983_20240628_1741 (UTC)RegardsMurat

Hello,Are there any resources similar to AN3364, that describe the migration directly from F4 to F0?Thanks.

@Erwan SZYMANSKIHello, I am having trouble with another topic . I was learning how to modify my distribution packet . I started with learning how to change backlight of my daughter board (ım using stm32mp157f-dk2). As I was trying to learn I make a patch to change default-brightness-level = <10>; ; panel_backlight: panel-backlight { compatible = "gpio-backlight"; gpios = <&gpiod 13 GPIO_ACTIVE_LOW>; default-on; default-brightness-level = <1>; status = "okay"; }; in the arch/arm/boot/dts/stm32mp157f-ev1.dts file  (https://github.com/STMicroelectronics/linux/blob/v6.1-stm32mp/arch/arm/boot/dts/stm32mp157f-ev1.dts ). With that I learned how to do patch and recipes.bb and .bbappend files but ı didn't do them applicable for my target design cause I couldn't find the target node about light. How can ı found it?  I looked at all the dts files with my file name but couldn't see it.

Once the IDE is installed, is connection to the internet required while using it ? Thanks

Hi!I'm a new STM32 user.  I acquired a Nucleo-144 board today and noticed that there are no pins in CN11 & CN12.  Just curious why.Thanks in advance.

Hello,I am using the STM32WL55 with the BLUENRG-2N.i need to add the Firmware update OTA capability using the Bluetooth (BLUENRG-2N)the examples of FUOTA for STM32WL are based on LoraWAN protocol ... so it is not what i looking for.Do you have any examples or documentation (application note or ...) that can help me to make my application ?Thank you,Sincerely.

Hi ,i am using STM32L4R9 based dev board STLINK-V3MINIE and wanted to use SBSFU, used the example code STM32L432KC_Nucleo_1_image from the library and flashed the SECoreBIN followed by SBSFU and then the userAPP code, but while flashing userAPP ,i got the below error,/*STMicroelectronics ST-LINK GDB server. Version 6.1.0Copyright (c) 2022, STMicroelectronics. All rights reserved.Starting server with the following options:Persistent Mode : DisabledLogging Level : 1Listen Port Number : 61234Status Refresh Delay : 15sVerbose Mode : DisabledSWD Debug : EnabledInitWhile : EnabledWaiting for debugger connection...Debugger connectedWaiting for debugger connection...Debugger connectedWaiting for debugger connection...-------------------------------------------------------------------STM32CubeProgrammer v2.10.0------------------------------------------------------------------- Log output file: c:\users\abinay~1.lda\appdata\local\temp\stm32cubeprogrammer_a21060.logST-LINK SN : 00350012

I am trying to change the system clock on my STM32F410RB using register programming. I have setup an SPI protocol to an external DAC IC which needs a minimum of 100ns (10MHz) clock period. The SPI allows for a maximum of 8MHz (fPCLK/2) at default clock settings.I cooked up a little code but it doesn't seem to work as expected. When I probe the SCK, all I get is a constant DC type plot or a noisy output. Here is the code: void set_new_system_clock(void) { RCC->PLLCFGR &=~(1U<<22); RCC->PLLCFGR &=~(1U<<0); RCC->PLLCFGR &=~(1U<<1); RCC->PLLCFGR &=~(1U<<2); RCC->PLLCFGR |= (1U<<3); RCC->PLLCFGR &=~(1U<<4); RCC->PLLCFGR &=~(1U<<5); RCC->PLLCFGR &=~(1U<<6); RCC->PLLCFGR |= (1U<<7); RCC->PLLCFGR &=~(1U<<8); RCC->PLLCFGR &=~(1U<<9); RCC->PLLCFGR |= (1U<<10); RCC->PLLCFGR |= (1U<<11); RCC->PLLCFGR &=~(1U<<12);

I want to ask about realise date of STM32MP257F-EV1?Today, I see a local shop sell this board with price 800$. I guess this is contraband board from China and the price too expensive with my expect.

Hello everyone,I recently downloaded TouchGFX version 4.23.2 and tried running the example on my STM32F7508-DK. However, when I click the simulation button, I encounter these errors. Can anyone help me with this issue? I'm running TouchGFX on Windows 11 Run SimulatorGenerateDoneGenerate Assetsmake -f simulator/gcc/Makefile assets -j8Reading ./application.configReading ./target.configDonePost Generatetouchgfx update_project --project-file=simulator/msvs/Application.vcxprojDonePost Generate Targettouchgfx update_project.cproject file: ../STM32CubeIDE/.cprojectWriting STM32CubeIDE project file: ../STM32CubeIDE/.projectWriting STM32CubeIDE project file: ../STM32CubeIDE/.cprojectDoneCompilemake -f simulator/gcc/Makefile -j8Reading ./application.configReading ./target.config/usr/bin/sh: -c: line 0: syntax error near unexpected token `('/usr/bin/sh: -c: line 0: `C:\Program Files (x86)\GnuWin32\bin\make.exe -f generated/simulator/gcc/Makefile -r -s -rs -j --jobserver-fds=gmake_semaphore_1

i am using LoRa E5 dev board for programming my code , i am using STM32 stlink debugger with stm32 cube programmer , the board is not connecting my stm32 cube programmer , the serial number is showing 1 but when i am trying to connect it is not connecting and showing  UR connection mode is defined with the HWrst reset mode , it is mentioned in the manual like  Erase Factory AT Firmware section first, as if we need to erase the Factory AT Firmware before we program with SDK. After erasing the Factory AT Firmware it CANNOT be recovered.i dont know how to erase and code for the controller .the stm32 page photo is attached below. i need support , please help me.

I have to use the stm32H7b3i-Eval Onboard camera with USB HS capability, though I can get camera visuals directly to the Windows default camera app. I got a similar project on STM GitHub for board stm32h747i-disco on this linkThe details about the Eval board are on this link.can suggest some prepared code links or something like How to do it? How much time does it requires

I want to configure a stm32wb as BLE central and other as BLE peripheral such that they can exchange data. The combination of all this data also needs to be sent to a mobile phone. Can anyone suggest me a MOOC or may be a document that can  be used as a manual to perform this task.

Hello, As far as I known, ST released two kinds of AVAS EVK which one is based on AEK-MCU-C1MLIT1(https://www.st.com/en/solutions-reference-designs/sl-ssasf011101v1.html ) and another is based on AEK-AUD-C1D9031(https://www.st.com/en/evaluation-tools/aekd-stereoavas.html#overview ).I have both EVKs now but I have a issue on #2 case below.AEK-MCU-C1MLIT1 with PLS Programmer/debugger tool + UDE StarterKit SWAs you know well, AEK-MCU-C1MLIT1 board includes PLS Programmer/debugger tool inside itself. So, Under this environment(PLS Programmer/debugger tool + UDE StarterKit SW), I can write/erase specific NVM part to change WAV file(.hex format) and the way is explained very well on UM2719 like below.    AEK-AUD-C1D9031 with StellaLink Programming/Debugging tool + autodevkitspc5studio SWAEK-AUD-C1D9031 board doesn't include PLS Programmer/debugger tool inside itself. So, I bought a stellalink(AEK-AUD-D1D9031 can support this). But U

Hello  I am working with an STM32G474RET6, using Timer 3 in one-pulse mode with an external trigger.Below is my Timer 3 initialization code:static void MX_TIM3_Init(void){/* USER CODE BEGIN TIM3_Init 0 *//* USER CODE END TIM3_Init 0 */TIM_ClockConfigTypeDef sClockSourceConfig = {0};TIM_SlaveConfigTypeDef sSlaveConfig = {0};TIM_MasterConfigTypeDef sMasterConfig = {0};TIM_OC_InitTypeDef sConfigOC = {0};/* USER CODE BEGIN TIM3_Init 1 *//* USER CODE END TIM3_Init 1 */htim3.Instance = TIM3;htim3.Init.Prescaler = 0;htim3.Init.CounterMode = TIM_COUNTERMODE_UP;htim3.Init.Period = 4097;htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV4;htim3.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;if (HAL_TIM_Base_Init(&htim3) != HAL_OK){Error_Handler();}sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;if (HAL_TIM_ConfigClockSource(&htim3, &sClockSourceConfig) != HAL_OK){Error_Handler();}if (HAL_TIM_PWM_Init(&htim3) != HAL_OK){Error_Handler();}if (HAL_TIM_OnePul

Hello,I have developed my own evaluation Board for the STWLC98 Chip. When connecting the power suplly, the DC-Mode, which is on the IC when it is delivered, works in a correct way. But when I want to program the IC with the following firmware from the ST Website: STEVAL-WLC98RX_config_2C00.memhSTEVAL-WLC98RX_nvmpatch_1454.memhI get the following errors, when the programming status bar reaches 100%: Config Id Mismatch! file/chip: 0x2C00/0x1000Wrong config id 0x1000 and patch id 0x0000 for RX Where can I find the right Firmware or do you have any solutions for me?Thank YouSimon

Hello,We have a device that runs an stm32g0. I have a bootloader at the beginning of the flash and then 2 pages for config and the rest of the flash for the firmware. The bootloader basically checks if the two config pages are OK and then starts the firmware. I have now 3 decives that suddenly stopped working and all have the same issue:The device starts in bootloader, prints some messages (UART) and then freezes and restarts when the watchdog times out. Based on the messages I see at the output, I know that the only thing the bootloader does before freezing is reading the two config flash pages (copying the content to a buffer with memcpy).I see two possibilities:1) the bootloader (code in flash) is somehow corrupt, however I've write protected the flash where the bootloader rests...2) reading the internal flash (config pages) creates an interrupt (hard fault maybe?) and the bootloader is stuck in the busy loop of the interrupt handler (I have no output there unfortunately).The device

Hi,       I would like to check whether it is possible to perform internal SPI full duplex loop back tests on the STM32H563ZIT6 board, but I don't know how to do it.any one please help me.

Hi I have added the required details in the MC workbench and clicked on "Generate the project" After that, the below window pops up.  in that under Firmware Package Version it is providing the three option to select 1. STM32 FW V1.11.52.STM32 FW V1.11.4 (Recommended , not installed)3. Latestfrom that I have selected the STM32 FWV1.11.5 option and clicked on the <Generate> button  , but it completing the project generation with error.I need you inputs on the below points1. why project is generating with error , how I can resolve this error2. the second option STM32 FW V1.11.4 , where I will get this and what is the process to added this in the project , so that it will detect in the dropdown list in MC workbench. In advance thankyou for your support.    

Hi there,this is my first post here. So be gentle with me ;)I been working on a project with STM32H757XIH6 for some time now, but without any success. This is already my 2nd prototype and costed me quite some $$ since it had to be a 8 layer PCB. The soldering I have performed my self with a heat gun and heating platform...This worked fine in the past.I checked everything already several times, but since I am doing this one alone, I most have missed something.The issue has to be from the MCU connection/Layout since this one gets super hot when I power the board. If I desolder the MCU out, I can control the other devices(power supplies I2C devices, SPI, etc ). The power input looks like this: From the System supply configurations I intend to use this one (in red). Being SMPS off and Vreg on. Am I missing something ?The 3.3V  are stable when I desolder the MCU.I would appreciate any help since I am quite stuck on this issue alone .Much appreciated in advance. 

Hello,I'm a hobbyist and I'm working on a USB to 4xI2S (8 channels using the SAIs) using a stm32H7 MCU. I have a proof of concept working on a stm32F7 discovery board. I'm starting to look at the dedicated board.I understand that the USB peripheral needs a precise clock, which can't be achieved alone by the internal HSI oscillator, as it is not precise enough. The stm32H7 has a clock recovery system, CRS, to calibrate the HSI with the SOF signal.Would you have experience with using the HSI+CRS?Are there tricks in the implementation if the Return of Experience was positive?Safer to go with a 8Mhz HSE?Best regards,JMF

Hello,I use ST's STDRIVE101 in a design to drive a three-phase BLDC motor and used the reference design EVALSTDRIVE101 as a design guideline. My design has a MOSFET switching frequency of 20 kHz and a MOSFET drain-source voltage between 36 and 42 V.I have some questions about the design’s power stage (see screenshot from the design’s documentation below) and would be very grateful for an answer.  All designators mentioned are taken from the screenshot.  My questions are:Gate resistor R11: Is there a strong reason for choosing 33 Ohm? My thinking is that when using a smaller resistor, the MOSFET’s switching on process could be sped up as my design uses a MOSFET capable of turning on faster. Is this possible with STDRIVE101 and to what extent could the gate resistor be reduced?Gate driver diode D1: This is used for faster switching off the gate by bypassing R11 if I get the design correctly?Resistor R14: I assume this is a pull-down resistor to drain the gate from unw

I am trying to program the STM8S001J3 microcontroller, on a custom board. I am using ST Visual Programmer tool for flashing the program but I’m running into the following error continuously.I have tried using both ST-Link/V2(A) and ST-Link/V2(A) ISOL but it gives the same error. Since Reset pin is not available in this controller, connections I made are as follows:ST-Link/V2(A)Target MCUVDDPin 4GNDPin 2DataPin 8And I believe the configurations I made in STVP are correct:So, I have these questions:1. Are the connections with ST-Link correct? Should we be using another version of debugger/programmer? If yes, could you direct us to which device we should be using?2. Is there any other way to simulate the reset condition other than Power-On Reset?

When I try to generate code I am getting "eclipsec" error pop=up referring me to a log file. The file content is attached below. I have uninstalled all the STM32 applications and reinstalled just MX 6.12.0, but error is still here. !SESSION 2024-07-15 17:37:34.297 -----------------------------------------------eclipse.buildId=unknownjava.version=17.0.11java.vendor=Eclipse AdoptiumBootLoader constants: OS=win32, ARCH=x86_64, WS=win32, NL=en_USFramework arguments:  -application com.st.stm32cube.ide.common.services.mx.rcpApp -rmiServerPort 8435 -projectUpdate -buildType exec -src cube -cubeScratchFile C:\GIT_REPS\PROJECTS\JefCore\SPLIT\FIRMWARE\Simulator\F3discovery\MX\mx.scratchCommand-line arguments:  -os win32 -ws win32 -arch x86_64 -application com.st.stm32cube.ide.common.services.mx.rcpApp -data C:\Users\panasyuk\.stm32cubeide\.workspace_5374180911736407778 -rmiServerPort 8435 -projectUpdate -buildType exec -src cube -cubeScratchFile C:\GIT_REPS\PROJECTS\JefCore\SPLIT\