Solved

How to make a chart with a similar functionThe x-axis range is fixed, zooming, etc., the historical waveform is not saved, only the current 10s waveform is displayed

..

..

can stm32cubeMonitor recognize IAR IJet probe?I saw in one of your pages that it should but I tried it with 2 different computers and even though it recognized st-link, it didn't recognize the IJet probe.

I am using the STM32CubeIDE on Fedora linux and I would like to try the STM32CubeMonitor. However only .deb package is available. Is there (or is planned) the release of RPM package?I tried to convert the .deb package using the "alien" utility, unfortunately without success.

Hello,I'm new to STM32CubeMonitor and I need some help. I made a project that consists of sending an unkown length string (DMA) to a nucleo board and then receive the same message on my terminal.I've been using realterm and it works fine, but i would like to know how to send strings using STM32CubeMonitor software.I want to type a message on a 'text input' node, press a button and then send the string to the board.Thank you,Iñigo

Following our STM32CubeMonitor webinar on April 13th, 2021, here are the list of resources and list of Q&A posted as separated answers.Webinar website: https://www.st.com/content/st_com/en/about/events/events.html/stm32-application-monitoring-with-stm32cubemonitor-webinar.htmlWebinar on-demand (watch recording): https://www.st.com/content/st_com/en/premium-content/premium-content-remote-stm32-application-monitoring-with-stm32cubemonitor.html STM32CubeMonitor page: https://www.st.com/en/development-tools/stm32cubemonitor.htmlAttached STM32 demo project and technical slides presented during the demonstration.Below are the questions and their respective answers

Just powered up the  X-NUCLEO-LPM01A with a L432KC mounted in the Nano socket but without having software to cycle thru test modes I have a flat line. In other words, blinky don't cut it for power monitoring.

I plan to show the dashboard via browser to other people, I am afraid they might mess up my flows. Is it possible to add security functionality?I was trying to comment out as per instructions here:https://nodered.org/docs/user-guide/runtime/securing-node-red#editor--admin-api-securitybut the flows will not show after I enabledadminAuth

hello everyone!There are some problems in using snapshot mode.When I switch to snapshot mode, I often can't collect data, as shown in the picture. After a few reboots, the software can work normally. What are the possible reasons?Best regards

..

I have Dell laptop with 4K display (XPS 15).A solution to handle this - to reduce the display resolution to 640x860 by the OS. please use updated JRE which can handle such displays.

I instrumented the code with the supplied code, and it works fine in STM Studio, but when used in CubeMonitor, after started, the dashbord just displays 'Acquisition started, waiting for value'. I've checked the data flow from STLink and found that only 'x' value present in the data payload, but without 'y' value.Is there a way to trigger the data sample manually? Or supporting trigger is mandatory in snapshot mode?

Trying to monitor a 'C' variable of type bool results in the errornot connected ! bad parameter (7)and the probe connection drops. It then comes back all on its own!!Changing the variable to any other type and the monitor runs fine.

Helo, Dear ST!I very happy for use Yours many devices. They are very cool! You are very cool too!So, I was download Your STM32Monitor on my PC. But after install this software on the my Windows 7 I seen unreal picture:Installator of STM32Monitor putted its Icon on the my descktop and after I double clicked it was destroyed and removed all installation files and directories. After, I tryed next two Installs of this software - nothing. All is bad.Please, tell me what I need for repair this problem.With Good wishes,Arthur Tim

I want to in corporate conditional data logging in Cube Monitor Flow, since i intend to monitor the behaviour over many hours.My requirement is to log all the 4 fields:ms_enDeviceOrientationms_stStAccelDataXms_stStAccelDataYms_stStAccelDataZonly if ms_enDeviceOrientation changes from value of 1 to value of 2.I tried to tie this to the trigger threshold in data acquisition but this option was disabled.Could not find any examples to do this any other way.Looking forward to clear and specific description or example.Thanks in advance.

..

After rebuilding an ELF file, going into the Edit Variables node indicates that those variables alphabetically near the top are retained but those further down the list have been dropped requiring them to be re-selected. Is this a memory overflow and is there a way of allocating more memory so this doesn't keep happening?Thanks.

Hi Everyone!​I just started my first STM32F4 project and I was wondering if there is an IDE that can show the content of a range of memory in form of a data plot.​I ​tried to find someting on the web but had no luck so far.​This means for debug I am currently sending data in 8bit blocks via the serial port to the PC. Stitch it back together and plot it in Octave/Matlab.​Is there an easier way, ideally in the IDE? I am using AC6 at the moment.​​

I am using stm32F205vet6 , I want to use multiple timers and work, But if I use multiple timers the code will be huge as every timer need internalization is there any alternative I can use timers with minimal codeI have also tried the hw_rtc.c file and timerServer.c file implementation ,In that scenario stm32f205vet6  has no sub seconds option I have hw_rtc.c file with subseconds so I cant able to use that method Please help me solve this issue.

I used LSM6DSV16BX for bone conduction detection. Based on the sample code and driver provided on github, everything related to the I2C works fine. But when it comes to the TDM part, I can not get any valid data from the tdm port.my platform is esp32 s3 with esp idf framework, which support the tdm reading generally. And i use the code just like reading the data from multiple microphones with TDM in this project. It does not work ( or look like a sound wave). The tdm port gives the steady wave-like data but have nothing to do with the sound)Is there any sample code about how to read/decode the tdm data from this module? and what is the correct data looks like?

Dear All,I am using the X-CUBE-SPN5 with the EWARM toolchain (F302R8 with IHM05A1) to control a stepper motor. For now, I can move the motor to a specific angle.Now, I would like to transmit the target angle by Python. I have a USB to TTL Serial Cable. I would thus like to program the serial communication.Can I use for example the UART provided functions by SPN7 and use it in the project derivated from SPN5? Tanks in advance for your help ! :)

Hello Everyone,I'm having issues with the EVAL6480H making a bipolar stepper motor spin faster than 800steps/s without losing steps or triggering the OCD. The current motor driver we use handles 1500steps/s at the same voltage and current specs with ease so I'm a bit surprised to be having this issue with a driver that is much more capable on paper.My set up:STEVAL-PCC009V2 connected to the computer with a USB-A to USB-mini B cable and connected to the EVAL6480H with the included 10pin IDC ribbon cable.EVAL6480H supplied by bench power supply set to 24V and 2.8A max.Bipolar stepper motor (NEMA23 x 56mm, 1.8 degrees/step, 3.2V, 2.8A) connected to the output of EVAL6480H, OUTA to phase A and OUTB to phase B.Using the SPINFamily Evaluation Software to configure and control the EVAL6480H. I've also purchased the ST-Link/v2-Isol tool and updated the firmware on the STEVAL-PCC009V2 to v2.7.What I've tried:I've tried going through all the configurations for the L6480H chip that the SPINFamily

I use the STM32F103C4 and STM32F030F4 chip. I design a card with these chips. How I can programmable these chips? If I add SWDIO, SWCLK, +3.3V, and GND pins to the card as a male header, Can I connect the ST-LINK v3 to these pins and program it directly? I added a photo of the design diagram. Or should I add boot0 and boot1 pins like on the STM32F103 card?First photo ----- STM32F0Second photo -------STM32F1

Hello,I'm searching for a way to use sector 0 as storage memory but no luck so far.I'm using STM32F401CCU6 and I'm working on a firmware which have to save about 300 bytes in a no volatile memory. For this microcontroller family we have this memory map:Sector   -  Address ini    ~ Address end   - SizeSector 0 - 0x0800 0000 ~ 0x0800 3FFF - 16 KbytesSector 1 - 0x0800 4000 ~ 0x0800 7FFF - 16 KbytesSector 2 - 0x0800 8000 ~ 0x0800 BFFF - 16 KbytesSector 3 - 0x0800 C000 ~ 0x0800 FFFF - 16 KbytesSector 4 - 0x0801 0000 ~ 0x0801 FFFF - 64 KbytesSector 5 - 0x0802 0000 ~ 0x0803 FFFF - 128 KbytesSector 6 - 0x0804 0000 ~ 0x0805 FFFF - 128 KbytesSector 7 - 0x0806 0000 ~ 0x0807 FFFF - 128 KbytesSo far I already used a little bit more then 66kB, which means, my firmware is using sectors 0 to 4 and increasing.Now, I'm already saving the data in flash memory, all good for the sector 5 using HAL. But it's only 500 bytes in a block of 128Kbytes, it's a waste of memo