Solved

I want to use the rsa feature of mbedtls but when I uncomment #define MBEDTLS_RSA_C in the mbedtls_config file it is showing undefined reference to mbedtls_rsa_get_len, mbedtls_rsa_check_pub_priv, mbedtls_rsa_init, mbedtls_rsa_free and mbedtls_rsa_import_raw.  

I am currently following a tutorial on setting up micro-ros with STM32 uC's and for some reason, I can't seem to find a particular setting described in the steps.micro-ROS can be used with SMT32CubeIDE following these steps:Clone this repository in your STM32CubeIDE project folderGo to Project -> Settings -> C/C++ Build -> Settings -> Build Steps Tab and in Pre-build steps add:docker pull microros/micro_ros_static_library_builder:kilted && docker run --rm -v ${workspace_loc:\${ProjName}}:/project --env MICROROS_LIBRARY_FOLDER=micro_ros_stm32cubemx_utils/microros_static_library_ide microros/micro_ros_static_library_builder:kilted Add micro-ROS include directory. In Project -> Settings -> C/C++ Build -> Settings -> Tool Settings Tab -> MCU GCC Compiler -> Include paths add micro_ros_stm32cubemx_utils/microros_static_library_ide/libmicroros/includeI proceed to do the following but under the 'settings' menu, I am met with less options than describ

I have a problem and currently no clue how to further debug. Maybe one coudl help me. I use STM32f4 to capture with ADC1 3 signals with 1Mhz (so 333kHz per channel) triggered by a timer and transfered via DMA. I have a DMA buffer of 3*2*100 (so 100 samples per channel per half DMA). When DMA is Half/Full filed, I store the data in a second buffer with 10 times 100 samples. Using a test sin signal ~23kHz, I get discontinuities at each 100 sample border. I check the code several times but could not find an error and it seams like ADC sampling is kind of pausing at each DMA Half/Full callback call (which seams not plausible)BR, BastelBaus The faulty output with discontinuities each 100 samples: Timer configuration (96Mhz clock)ADC configuration Init the ADC and callbacksvoid ADC_init(void) { HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_1); // ADC trigger HAL_ADC_Start_DMA(&hadc1,(uint32_t*)&adc_samples,ADC_N ); } // void ADC_init(void) {// Called when firs

Hi all,So, after almost half a year of arduous blood, sweat and tears I have managed to scrape together "something that works". It consists of a custom schematic and PCB powered by an STM32F042C6T6 and an Si4705 radio tuner (from Skylabs).The STM32 uses the internal clock circuitry that is configured as depicted here. The CRS sync source is not shown here, but it is set to USB, so that the chip runs completely without any external crystals. The USB 2.0 is full-speed since the STM32 is only full-speed:The Si4705 currently uses a precise, external 32,768 kHz crystal oscillator (SG-3030CM from Seiko) that only requires a by-pass capacitor. This crystal oscillator is not connected to the STM32 in any way.The tuner chip has a prescaler and precise REFCLK adjustment so it can, if required, support a frequency range from 31130 Hz up to 140,89 MHz. Currently these settings are in their default values due to the crystal oscillator.The STM32 commands the Si4705 via I2C, without DMA, and thi

After updating TouchGFX from 4.24.1 to 4.26.0, the Stride setting in "X-CUBE-TOUCHGFX"->"TouchGFX Generator" is readonly (grayed out). I need to set it to the value 832. The generated code uses the value 800, even if I modify the value in the project.ioc file manually.When I change the Stride value in TouchGFXHAL.cpp and in TouchGFXGeneratedHAL.cpp (at call of setFrameBufferSize()) manually, the display works perfectly.I am using:STM32F769BIT uCMxCube 6.15.0STM32Cube FW_F7 V1.17.4 Any advise is very welcome. Thank you! 

Hiya. This is my first time working with custom STM PCBs.I was planning on flashing/programming my custom STM32H7 board (specifically STM32H7A3RGT6) over STLINK and then just do general purpose programming over the USB-C COM Port. However, the TAG connector pitch was the wrong size so I'll need to find an adaptor to connect that to the STLINK module I have.I was wondering if there is anything I can do in the meantime to program the board? The SWO/SWDIO/SWDCLK pins are broken out and I have a Nucleo L432KC. Are there any guides or tutorials for me to follow for this kind of thing?Any help is much appreciated :).

Today, while using the CubeMX product, I upgraded to version 6.15.0 (previously 6.14.1). After upgrade, the CMake step when generating project code failed. Even when generating an empty project, CMake still did not succeed. I also tried previously working projects that had been successfully flashed before, but they also failed during the CMake step.The following error message was displayed: CMake Error at D:/Program Files/JetBrains/CLion/bin/cmake/win/x64/share/cmake-3.31/Modules/CMakeTestCCompiler.cmake:67 (message): The C compiler "C:/Program Files/GNU-Arm-Toolchain-eabi/bin/arm-none-eabi-gcc.exe" is not able to compile a simple test program. It fails with the following output: Change Dir: 'D:/project/keysking/P10_Clock/clock/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-q0iun1' Run Build Command(s): "D:/Program Files/JetBrains/CLion/bin/ninja/win/x64/ninja.exe" -v cmTC_47519 [1/2] C:\PROGRA~1\GNU-AR~1\bin\AR19DD~1.EXE -std=gnu11 -fdiagnostics-color=always -o

Hey,I have a confusing error, i have a Riverdi 7" TFT Panel (https://download.riverdi.com/RVT70HSTNWC00-B/DS_RVT70HSTNWC00-B_Rev.1.2.pdf)Actually my LTDC Init is this:static void MX_LTDC_Init(void) { /* USER CODE BEGIN LTDC_Init 0 */ /* USER CODE END LTDC_Init 0 */ LTDC_LayerCfgTypeDef pLayerCfg = {0}; /* USER CODE BEGIN LTDC_Init 1 */ /* USER CODE END LTDC_Init 1 */ hltdc.Instance = LTDC; hltdc.Init.HSPolarity = LTDC_HSPOLARITY_AL; hltdc.Init.VSPolarity = LTDC_VSPOLARITY_AL; hltdc.Init.DEPolarity = LTDC_DEPOLARITY_AL; hltdc.Init.PCPolarity = LTDC_PCPOLARITY_IPC; hltdc.Init.HorizontalSync = 0; hltdc.Init.VerticalSync = 0; hltdc.Init.AccumulatedHBP = 160; hltdc.Init.AccumulatedVBP = 23; hltdc.Init.AccumulatedActiveW = 1184; hltdc.Init.AccumulatedActiveH = 623; hltdc.Init.TotalWidth = 1344; hltdc.Init.TotalHeigh = 635; hltdc.Init.Backcolor.Blue = 0; hltdc.Init.Backcolor.Green = 0; hltdc.Init.Backcolor.Red = 0; if (HAL_LTDC_Init(&hltdc) != HAL_OK) { Error_

Hello,I'm working with STM32F429ZI nucleo board, and I would like to flash my program using UART (USART1 or UART3 via  a usb to ttl converter)  instead of ST-Link.I understand that STM32 has a built-in bootloader that can be used for flashing via UART, but I'm not sure about the exact steps or tools required.when I connect the uart  with  STM32CubeProgrammer an error message come :-13:58:51:175 : Error occured while sending Init command.13:58:51:175 : Error: Activating device: KO. Please, verify the boot mode configuration and check the serial port configuration. Reset your device then try again......settings I did:1.the boot0 pin connected with 3v3 and boot1(pb2) connected to ground2.uart3 pins PB10,and pb11 used for tx and rx respectivelyHere’s what I’ve tried / what I need help with:1. How to connect the UART pins correctly for flashing?2. What BOOT0 and BOOT1 pin settings are needed?3. What software can I use on the PC side (e.g., STM32CubeProgrammer or any alte

Dear NFC Forum Community, we have recently developed a circuit design using one of STMicro’s latest NFC chips (e.g. ST25R200 as their most recent reader IC). We are very interested in having this design validated under NFC Forum conformance testing. We are based in Germany and have learned that IB-Lenhardt AG / IBL-Lab GmbH operates in St. Ingbert and is now officially designated as an Authorized Test Lab (ATL) for NFC Forum analog and digital conformance tests. The lab is ISO/IEC 17025 (DAkkS) accredited and works with validated test systems and robotics from COMPRION.https://ib-lenhardt.com/product-testing/nfc Do any forum members have experience working with IBL-Lab GmbH / IB-Lenhardt AG for NFC Forum conformance testing? If so:• What were the results and your overall impression of their services?• With what ballpark costs did you come across for an initial protocol / conformance test? Thank you in advance for any insights or contact suggestions. Best regard

I'm developing a bootloader for a project using the STM32H563VGT6 with 1MB of internal flash memory.  I've developed a bootloader in the past for STM32H743 which works correcty.In this H5 bootloader I seem to have problems writing to the internal flash memory.  Below is the code I have to write a block of data to flash memory.uint32_t Flash_Write_Data (uint32_t StartSectorAddress, uint32_t *data, uint16_t numberofwords) { static FLASH_EraseInitTypeDef EraseInitStruct; uint32_t SECTORError; int sofar=0; /* Unlock the Flash to enable the flash control register access *************/ HAL_FLASH_Unlock(); /* Erase the user Flash area */ /* Get the number of sector to erase from 1st sector */ uint32_t StartSector = GetSector(StartSectorAddress); uint32_t EndSectorAddress = StartSectorAddress + numberofwords*4; uint32_t EndSector = GetSector(EndSectorAddress); /* Fill EraseInit structure*/ EraseInitStruct.TypeErase = FLASH_TYPEERASE_SECTORS; EraseInitStruct.Sector = Sta

Hello, We have a STM32H755 with an FRam (similar to SRAM) module attached to the FMC. We have been seeing CPU exceptions when the M4 core tries to access (read only) the same memory location the M7 core is writing to. So, it seems that the FMC does not arbitrate between the two cores... Is that correct? or do we potentially have the FMC configured incorrectly.   We have the FRam memory address region configured in the MPU as shareable (M7 - read/write) and read-only (M4 - reads only) and tried with cache disabled as well with same cpu exception... Thanks, -mike

I need to calibrate STM32l431 RTC in software for using LSI clock. When I compare STM32 RTC with GPS reference I get the following GPS 1759492828 1759493307 => RTC 1759500022 1759500494Diff GPS: 479 secondsDiff STM32: 472 seconds=> 7 seconds = 1.48% difference andPrefered frequency to RTC 32473 I thought smooth calibration could be used for this kind of calibration but it seems it can only calibrate small changes for crystal.Any ideas how this can be done? I cannot modify PCB for external pulses, I need to correct in software. Clock will be syncronised 8, 16  and 24 hours interval, so accuracy does not need to be like a crystal.

Hello,I use a custom board based on STM32H750 (as Discovery board) with a 800*480 TFT (24 bit).I try using the Video widget with the sample_video_1_medium_480*272 but in portait mode it show bad image, not understandable.Next I try a custom video with 480*320 resolution: now i see the rows and columns are inverted.For the first video I think there is also a problem with number of rows (272) since is not divisible for 32.If I change setting in Touchgfx designer with landscape, both 2 video are correct.I need to work in portait mode: I have to modify something in the program or try to rotate the video before compile?Thanks.toma Fabio

The reference manual mentions that data swapping can be used when e.g. processing ASCII, but I'm not clear on exactly what it does. If I set it to byte mode, does that mean I can write single byte values padded to 32 bits with zeros into the FIFO? And with the bit mode, can I write single bits padded to 32 with zeros? What if I don't pad with zeros and just write 31 random bits plus the 1 bit I care about?Obviously I can gather the bits together into a 32 bit word and write it in one go, but that will involve the CPU. If I can write bits, or even just bytes, with DMA, it will improve performance considerably.

Same problem here (Cube 6.15.0, Keil uVision  Although HAL is selected, Cube installed both HAL and LL files for ADC and some other peripherals by mistake.  which results in a compile error ../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_adc.c(25): error: 'stm32_assert.h' file not found To get rid of this, I excluded the unnecessary file in the project as shown above and the error is gone. Edit: Moved from CUBE MX with Keil 5.39 Full Assert bug in stm32l0xx DFP  

The first watchdog successfully generates /** Configure Analog WatchDog 1 */ AnalogWDGConfig.WatchdogNumber = ADC_ANALOGWATCHDOG_1; AnalogWDGConfig.WatchdogMode = ADC_ANALOGWATCHDOG_SINGLE_REG; AnalogWDGConfig.HighThreshold = 20; AnalogWDGConfig.LowThreshold = 4; AnalogWDGConfig.Channel = ADC_CHANNEL_1; AnalogWDGConfig.ITMode = ENABLE; if (HAL_ADC_AnalogWDGConfig(&hadc1, &AnalogWDGConfig) != HAL_OK) { Error_Handler(); }The second watchdog generates... nothing. When I write out similar code myself for the second watchdog then it starts working. The IOC interface looks like 

Hi, I wanted to ask the group if the demo code "SPC58EC - AEK_POW_BMSLV application for discovery" already includes automatic cell balancing, or if it doesn't, or if it needs to be enabled somehow. I was also interested in knowing if there was a GUI for this BMS.  

Spoiler (Highlight to read)Hi,When using ZbZclWriteReq to write Zigbee attributes remotely, it works OK if I write one attribute at a time, but I am not able to write several at once. Shouldn't the following code work with two attributes? Is there any limitation in the implemented stack?memset(&writeReq, 0, sizeof(writeReq));writeReq.dst.mode = ZB_APSDE_ADDRMODE_SHORT;writeReq.dst.endpoint =SW1_ENDPOINT;writeReq.dst.nwkAddr = 0x0000; writeReq.count = 2U;writeReq.attr[0].attrId=MY_ZCL_DEV_TEMP_CURRENT ;writeReq.attr[0].type=ZCL_DATATYPE_SIGNED_16BIT; writeReq.attr[0].value= (const uint8_t*) val;writeReq.attr[0].length = 2; writeReq.attr[1].attrId=MY_ZCL_DEV_PRESS_CURRENT ;writeReq.attr[1].type=ZCL_DATATYPE_SIGNED_16BIT;writeReq.attr[1].value= (const uint8_t*) val2;writeReq.attr[1].length = 2; if(ZbZclWriteReq(zigbee_app_info.device_temp_client, &writeReq, APP_ZIGBEE_Write_cb,NULL) != ZCL_STATUS_SUCCESS){APP_DBG("Error, ZbZclReadReq failed (SW1_ENDPOINT)"

I keep getting warnings when using STM32CubeProgrammer_CLI that usb devices are still referenced: libusb: warning [libusb_exit] device x.x still referenced. This is a bit annoying.-------------------------------------------------------------------STM32CubeProgrammer v2.17.0-------------------------------------------------------------------libusb: warning [libusb_exit] device 4.7 still referencedlibusb: warning [libusb_exit] device 4.8 still referencedlibusb: warning [libusb_exit] device 4.6 still referencedlibusb: warning [libusb_exit] device 4.5 still referencedlibusb: warning [libusb_exit] device 4.1 still referencedlibusb: warning [libusb_exit] device 3.1 still referencedlibusb: warning [libusb_exit] device 2.1 still referencedlibusb: warning [libusb_exit] device 1.3 still referencedlibusb: warning [libusb_exit] device 1.2 still referencedlibusb: warning [libusb_exit] device 1.19 still referencedlibusb: warning [libusb_exit] device 1.20 still referencedlibusb: warning [libusb_exit]

Hi In the past 6 months, I created a project for an STM32H755. For middleware, I selected CMSIS RTOS v2 (using FreeRTOS underneath).I noted that the header file is cmsis_os.h, which at first seemed wrong. I (maybe naively) asked the "AI", and with it's usual confident tone, suggested I change them (however, this is hard to maintain if you change your .ioc file).Looking at past posts on these forums, and inside cmsis_os.h, I confirmed that cmsis_os2.h is indeed included within it (despite the AI not finding this).So, I challenged the "AI", stating what I had found. Of course, in it's somewhat complimentary way, it agreed with me, but still insisted that if I am using entirely v2 APIs, I should change the headers.Of course, such responses derive from human content written elsewhere, and I fear it may not backed by actual facts. I have left the headers as they are for now. I have a bad feeling about changing them as ST might have reasons to do things the way they have. So, is it

Hello, does ST67W61 module support pass-through mode?   I have an application based on a third-party IP stack and it would be a pain to rewrite it all with AT primitives. A far simpler solution would be replacing low-level calls to transmit and receive Ethernet frames over SPI link.   Alessandro

   Hello STMicroelectronics Support Team, I would like to make a custom wireless power transfer based project. I was trying to download the GUI (STSW-WBC2STUDIO). I am planning to use STEVAL-WLC38RX and the STEVAL-WBC2TX50. Please send me the software package asapThank you for your support. 

Hello, I am starting my project with CubeMX and CubeIDE right now and I am encountering massive time issues.For example it took almost 25 minutes to go from the IOC file to the generated code (throuh the autogenerating functionnality). It also took 3 minutes and 45 seconds to build a basically empty program (except for the inits).I'm running on CubeIDE v1.19 and CubeMX v6.15.My laptop is Windows 11, I have 32 GB RAM, 13th Gen intel Core i7-13700H.If you guys have any advice on how to work around it that would be great. Thank you very much !

Hello,  I was wanting to make my own camera board and I wanted to use the same camera that is on STM's Camera board MB1854 and I looked up that manufacturer part number (AS-BC538A3M6-63(1.02.A3265)) and nothing showed up, and when I looked up just AS-BC538A3M6-63 then the only result was STM's example schematic for the MB1854 camera board. I then tried looking up the company they listed on the BOM (HONGJIA) and still found nothing. Does anyone know how to find the board or even some contact info for that company?  ThanksCarson