Solved

Posted on July 05, 2016 at 12:28Hello,I've read product descriptions and FAQs, but still not clear about whether certain products offer me what I need.I'm interested in a product that consists of an MCU and an antenna, which allows me to read and write RFID messages. as a tagThe typical usecase is:1. the antenna alerts me of an incomming message2. I send a response. the response is sent exactly as I ordered - no self-added CRC or the likes.A big plus would be that the identification process is not done automatically, but I receive each message and respond to it myself.Can an ST product offer me this functionality? In which product?Thanks!

Posted on August 13, 2016 at 20:18Hello,Are there Arduino libraries for using the M24LR04E Nucleo expansion board with an Arduino Uno?Thanks,Stephen #library #arduino #m24lr04e

Posted on August 16, 2016 at 09:56Hi all,Is there a way to calculate the size of used RAM at running time. So that I can calculate how much RAM is still available for use. Actually I have to show used RAM in percentage to my product customer.

Posted on July 28, 2016 at 11:38Hello,I want to modify sector security status area to lock all sectors against RF access (R/W)To do so, I have to send a I2C present password command and then write the sector security status area.I never set the i2c password, so it should be 0000 0000hBut after presenting this password, I can't modify sector security status area.The sector security status area is still the same (I can read it)Is it possible to have a sample code or/and other documentation than AN3002 Description of the M24LRxx-R....Thank you!

Posted on June 14, 2016 at 14:02I've used code found on the internet for generating VGA video directly out of F4 devices thru r2r dacs, but since the introduction of HAL, I have yet to see any examples. Most existing code are still written for standard peripheral library only. I'm just thinking that if the Discovery boards can directly drive an LCD to 800x600x16k, is there an easy way to change the timing of the ltdc signals so that the code will drive a standard external VGA 15-pin color monitor directly? Any ideas, or suggestions? #hal-stm32f7-vga-video #stm32f7-vga-hal

Posted on July 08, 2016 at 09:46Hello,For my project i try to write some ndef message with stm32L4 and send it to M24LR discovery throw the i2c bus and after i want to read it with smartphone but all my try fail.I try the examples i2C polling and function of  cube nfc X-nucleo-NFC02A1 for generate tag but it doesn't work. The M24LR discovery board display error message = ''Not a ndef text message ''.Someone can help me please? #stm32l4-i2c-m24lr

Posted on June 13, 2016 at 11:58Hello,I'm starting with nucleo L476RG , MEMS and NFC02A1.I try to write MEMS data to nfc tag and its work.My problems is when i try to use energy harvesting mode, it  doesn't work and i don't know why. I use the exemple within the nfc cube but it doesn't work.You can look the main function and Enable_EnergyHarvesting belowCan someone help me please?Best regards #m24lr-harvested-power

Posted on July 22, 2016 at 10:28Hi, since the WWDG of the STM32L0 series can be deactivated only by a hardware reset I don't understand the purpose of the function HAL_WWDG_DeInit in the HAL (v1.7.0). The function and its description suggest, that I can call it to stop the WWDG. Best regards, Markus #hal #stm32l0 #wwdg

Posted on July 13, 2016 at 04:05Hi, I encountered following. When I set device type as ''ST STM32F401xE'' on EWARM, the project was build successfully. Is the device type should determined everytime? with,   STM32CubeMX Version 4.15.1   STM32Cube FW_F4 V1.12.0 procedure,by CubeMX   File -> NewProject   Board Selector -> MCU Series -> STM32F4  -> NUCLEO-F401RE   Nothing change  Project -> Settings -> Projcet Name:f401_projectname   Toolchain / IDE -> EWARM   OK   Generate Code  Open Project(IAR Embedded Workbench ofr ARM 7.10.3.6932, with 32KB code size limitation)   Alt+F7(see option) -> device is set as 'None'.Sice MPU type is not set, EWARM says as following at comilation.   Error[Ta097]:Cannot call intrinsic function ''_nounwind _DSB'' from Thumb mode in this architecture   Error[438]:This instruction is not available in the selected cpu/core   Error[Ta097]:Cannot call intrinsic funct

Posted on April 26, 2016 at 17:05Hi, for our application we must use an off-board antenna, which will be a PCB antenna and will be connected via coaxial cables to CR95HF IC. As I see it, the matching components should be located on the antenna side (on PCB) and on the CR95HF and host MCU should be just the connectors straight to the Rx1, Rx2, Tx1, Tx2 lines. Am I correct? does it sounds right to connect both PCB's by those 50 ohms coax cables? And a not related questions- 1. why there are two Rx inputs and two Tx outputs in the IC? 2. which i/f is used in the CR95HF Demo board, SPI or UART? Thanks! Ram #cr95hf

Posted on April 26, 2016 at 13:18Hello,I'm currently starting to add the CR95HF to one of our projects and I'm not sure, which library is recommended to use.The project itself is using the STM32-HAL drivers for hardware access (and it should stay this way!). The controller is a STM32F071 and the interface is SPI.The whole thing gets a bit more interesting, as we are going to connect 2 CR95HF to the chip - so ideally the library *should* support this (or should be easy to switch between 2 chips).What I've found so far: stsw-stm32031 Seems to be based on the std-periph-lib and implements this directly in the library-code --> selection of the SPI is made through a macro only.stsw-stm8017 The library used in AN3985 for stm8 controller. Seems to be abstracted relatively clear by some functions for spi-access. But it looks like there is only *normal* support for 1 chip with this library as well (could be made multi-chip enabled by a switcher-function).Is there anything else I should take

Posted on May 19, 2016 at 10:47I am currently developing NFC-powered device, based on Arduino and M24SR02 dynamic NFC tags. https://github.com/rena2019/ArduinoM24SR was chosen for establishing communication between Arduino and M24SR, and it works pretty fine with short NDEF messages. But I have noticed strange behavior, when reading  long NDEF messages. After reading ST documentation following questions appeared:1) What is the purpose of DID field ?2) Is it necessary to answer to S(WTX) ?3) Who an when can send S(WTX) command?Any help will be appreciated.

Posted on June 04, 2016 at 01:37 I developed a board using STM32F411 chip with uSD card.The code is generated by cubemx. only add a little bit code in main(). The hardware is OK. I can correctly write a file to sd card. But the weird thing is that the filename accepts 7 chars, not 6 chars. If I use 6 chars in the filename, the character encoding is totally different. In the testing I only change the filename. I attached two files generated by the chip. I can't read the first the characters in the first file. The problem is the encoding of the files are different. the thing is why the encoding are different. I didn't change anything. Actually I use ANSI in the setting. My question is 1. why the program uses two different encodings for the files just because I use different filenames? The file with 7 chars in filename always uses utf-8 encoding. 2. how to correctly set the encoding. Actually in the file I specify it to use ANSI enc

Posted on May 19, 2016 at 21:44The LowPassFilter code seems to be producing transients whenever the cutoff frequency changes rapidly from fully open (1.0f) to fully closed (<0.04f).Is there a way to debug the operations of the processors hardware FPU? I can't seem to understand where or how these spikes are happening? I am currently using Keil to compile, maybe there is another compiler that has a debugger for debugging the CPU's internal hardware FPU?If anyone has any ideas or comments, please let me know. Thanks!! Chris #stm32f767zi-nucleo-board #nucleo-144-synth-stm32f7xx #stm32f7xxxx-nucleo-144-synth #stm32f767zi-nucleo

Posted on May 19, 2016 at 12:58helloi am using stm32f03 to interface with eeprom but i am unable to read data please provide help on this my code is attatchedvoid I2C_WrReg(uint8_t Reg, uint8_t Dat) { while(I2C_GetFlagStatus(EEPROM_I2C, I2C_FLAG_BUSY) == SET); I2C_TransferHandling(EEPROM_I2C, EEPROM_ADDRESS_RD, 1, I2C_Reload_Mode, I2C_Generate_Start_Write); while(I2C_GetFlagStatus(EEPROM_I2C, I2C_FLAG_TXIS) == RESET); I2C_SendData(EEPROM_I2C, Reg); while(I2C_GetFlagStatus(EEPROM_I2C, I2C_FLAG_TCR) == RESET); I2C_TransferHandling(EEPROM_I2C, EEPROM_ADDRESS_RD, 1, I2C_AutoEnd_Mode, I2C_No_StartStop); while(I2C_GetFlagStatus(EEPROM_I2C, I2C_FLAG_TXIS) == RESET); I2C_SendData(EEPROM_I2C, Dat); while(I2C_GetFlagStatus(EEPROM_I2C, I2C_FLAG_STOPF) == RESET); I2C_ClearFlag(EEPROM_I2C, I2C_FLAG_STOPF);}uint8_t I2C_RdReg(uint8_t Reg){ uint8_t Dat; while(I2C_GetFlagStatus(EEPROM_I2C, I2C_FLAG_BUSY) == SET); I2C_TransferHandling(EEPROM_I2C, EEPROM_ADDRESS_RD, 1, I2C_SoftEnd_Mode, I2C_Generat

Posted on May 25, 2016 at 23:11I'm trying to use CubeMX to generate code for a STM32L4 Discovery board.  I'm trying to get a virtual com port working over the user usb port, not the usb st-link.  I can't manage to get this to work.  I have the drivers installed on my PC host, and it recognizes the st-link as a VCP, but not the user usb port. In my CubeMX project I have enabled the USB_DEVICE as a Communication Device Class (Virtual Port Com).  I've also enabled USART3, and set up the solder bridges per the user manual (SB24 and 25. What am I missing?  Is there an existing example for the STM32L4? #vcp #stm32l4-discovery-usb

Posted on April 26, 2016 at 08:50Hi, As per UM1749 User Manual  (Description of STM32L0 HAL and Low-layer drivers) the Low Level API should be found in: ''The Low Layer files are located in the same HAL drivers folder'' Figure 8: Low Layer driver folders'' Unfortunately there is no STM32l0xx_ll_.... files in this package. Where can I find them? Thanks, Bogdan

Posted on May 11, 2016 at 23:00Hi,I'm interested in password protecting the GPO toggle via RF. In other words, configuring the GPO to toggle via an RF StateControl command but password protecting this memory location so that the state can only be changed with the appropriate password.I thought this would be possible via the NDEF file password protection (that the password protection would extend to the system file) but I now fear this may not be the case.Can anyone verify or refute this before I invest too much time trying to get it to work?Thanks! #password #gpo #m24sr

Posted on April 26, 2016 at 11:25Hi all,I am working with STM32F411CE. I know that if I use below code will occurred every 1 ms, but it occurred every 0.5ms in my code. HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000);    // HAL_RCC_GetHCLKFreq = 96000000;I have searched the keyword ''systick_config'' and others, but I still could not resolve it. Please give some me advise to debug.I know it will depend on the Clock configuration. I post my configuration as below.My Code generated by STM32CubeMX. /** System Clock Configuration */ void SystemClock_Config(void) {  RCC_OscInitTypeDef RCC_OscInitStruct;   RCC_ClkInitTypeDef RCC_ClkInitStruct;  __PWR_CLK_ENABLE();  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;   RCC_OscInitStruct.HSIState = RCC_HSI_ON;   RCC_OscInitStruct.HSICalibrationValue = 16;   RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;   RCC_OscIni

Posted on April 24, 2016 at 11:36Hi All,I have downloaded the stock M24LR firmware from the official link foundhttp://www2.st.com/content/st_com/en/products/embedded-software/st25-nfc-rfid-software/stsw-m24lr016.html.I have also downloaded STVD for STM8 found http://www2.st.com/content/st_com/en/products/development-tools/software-development-tools/stm8-software-development-tools/stm8-programmers/stvd-stm8.html.I open the example firmware in STVD, and attempt to compile the project. I get the following error:----------- Project discover - STM8 Cosmic - Configuration Debug -------------Compiling ..\..\src\main.c...cxstm8 +mods0 +debug -pxp -no -pp -l -dSTM8L15X_MD -dHSE_VALUE=4000000 -i..\..\..\libraries\stm8l15x_stdperiph_driver\inc -i..\..\..\..\libraries\stm8l15x_stdperiph_driver\inc -i..\..\inc -i..\..\..\..\librairies\stm8l15x_stdperiph_driver\inc -iC:\Hstm8  -clDebug\ -coDebug\ ..\..\src\main.cError creating process for executable cxstm8The system cannot find the file specif

Posted on April 20, 2016 at 18:37Hi All,I would like to reprogram the M24LR Discovery board to re purpose the I2C input to use as a connector for an external  1-Wire Interface sensor (DS18B20). can anyone identify any issues with doing this?Furthermore does ST provide a download for the original firmware/program uploaded onto the STM8L152C6T6 incase i would like to restore the original program after modifying it? #i2c #esensor #m24lr #1-wire

Posted on June 06, 2014 at 05:47Hi all,I am using a ST NFC chip : M24LR16E in my products and I noticed some incompatibility with Smartphones of the market (Samsung S4, S5, Nexus 4)I have made some research and I found that these phones were using a Broadcom NFC chip (BC20794) which is not compatible with some NFC chips in the product. It depends on the type of NFC tag used. (Most of existing products has Mifare Classic 1k tag and it is just compatible with NXP chip equiped phones). In fact the M24LR16E has ISO15693 standard, which is the same standard as in the NXP NFC chips of the Smartphones (PN544, PN65N...). Whereas the ISO standards in the Broadcom chips are ISO 18092, ISO14443 (from NFC Forum type 1-4 tags)...So the problems comes from this different type of NFC tags technology (Mifare Classic 1k vs NFC Forum Type 1-4)? Or is it coming from the application?Do someone has the same problems? Do we need to change the M24LR16E chips?Thank you for your answersRegards #nfc #comp

Posted on March 24, 2016 at 08:46In AN3985 application note , it mentions that using CR95HF with STM8L-Discovery board. May I know where to download this firmware ? which show STM8L mcu work with CR95HF read/write tag. Thx #cr95hf

Posted on January 15, 2016 at 18:35NUCLEO-F746ZGhttp://www.st.com/web/en/catalog/tools/FM116/CL1620/SC959/SS1532/LN1847/PF262631NUCLEO-F446ZEhttp://www.st.com/web/en/catalog/tools/FM116/CL1620/SC959/SS1532/LN1847/PF262632Nucleo-144 will be with microcontrollers:STM32F207ZGT6STM32F303ZET6STM32F429ZIT6STM32F446ZET6STM32F746ZGT6Provides Ethernet connectivity

Posted on February 18, 2016 at 20:56Anyone one got any of these spare, or gathering dust?Drop me a line via usual email address (see avatar profile)