Solved

..

Hi,I am trying to read the MAC address from a BlueNRG device (345) after setting it via the RF Flasher Tool. However, the corresponding changes are not visible in the advertising parameters. I have used aci_hal_read_config_data() but still no output.The code is  ret = aci_hal_read_config_data(CONFIG_DATA_STORED_STATIC_RANDOM_ADDRESS, (uint8_t*)6, readAddr);I have set the mac address 0x000000000 currently using the tool at a flash address: Base address + flash image + a little offset.Any help would be appreciated! Thanks!

Hello,I am having some issues with adding SMT32CubeExpansion_Crypto_V4.0.1 to my stmcube environment. I am using stm cube 6.4. I go to Software Packs > Manage Software Packs > From Local... and then I point to SMT32CubeExpansion_Crypto_V4.0.1.zip, which was directly provided by ST.I get an error popup saying "This file is either corrupted or not a recognized package". See the screenshots attached.Am I missing any steps? Could someone please point me to the correct way of importing this package?Thank you.

I am trying to read 2 channel ADC with STM32L011F4.My ADC and DMA settings in cubemx are as follows my problem is that the DMA only returns the low 8 bit of the last channel.uint16_t ADC_Reads[2] = {0};   while (1) { HAL_ADC_Start_DMA(&hadc,(uint32_t *)ADC_Reads,2); HAL_Delay(1000); }When I write the following code in the DMA IRQ handler, I can read the values.uint16_t ADCReads[2]; char i=0; void DMA1_Channel1_IRQHandler(void) { /* USER CODE BEGIN DMA1_Channel1_IRQn 0 */ ADCReads[i] = hadc.Instance->DR; i = 1-i; /* USER CODE END DMA1_Channel1_IRQn 0 */ HAL_DMA_IRQHandler(&hdma_adc); /* USER CODE BEGIN DMA1_Channel1_IRQn 1 */   /* USER CODE END DMA1_Channel1_IRQn 1 */ }EWARM live watch screen looks like below

..

Hi,I want to perform the SSP process as detailed at:https://www.st.com/resource/en/application_note/an5510-overview-of-the-secure-secret-provisioning-ssp-on-stm32mp1-series-stmicroelectronics.pdf(I also went over the STM32_prog documents)I am now trying to program my HSMv2 card and I don't understand which file I need to provide in "Personalization data file"(Trusted Package Creator - HSM Tab)There are 2 options:STM32MP1_5000200A_SSP_01000000_00000000.enc.binSTM32MP1_5000300A_SSP_01000000_00000000.enc.binI don't understand which one I need to pickmy MPU is "STM32MP157CAB3" (Rev Z)is it 5000300 because of the "3" after the "CAB" ?The "5000" part I understand, I can see this value in the DFU device infoThe "200" vs "300" I don't understandAccording to the Docs, I need to know the product ID of my MPUAnd they suggest using "STM32_Programmer_CLI –c port=swd –gc "certificate.bin"" to find out this valuebut this command is failing:"an error occurred while uploading data from the virtual part

I'm debugging a problem on the target. The data I want to examine is in an array and can be easily seen in the Debugger console using "print output_data". I'd like this in a file to facilitate further host processing. When using gdb standalone I can do this with "set logging file my_log.txt" but this doesn't appear to work with GDB within STM32CubeIDE. I'm having to resort to copy and paste which works but is a bit tedious.

STM32F334 DMA + DAC.After CubeMX: MX_DAC1_Init(); MX_DMA_Init(); MX_DAC2_Init();DAC2 working, DAC1 don't workingAfter editing: MX_DMA_Init(); MX_DAC1_Init(); MX_DAC2_Init();DAC1 and DAC2 working.The same for STM32F103. MX_DAC_Init(); MX_DMA_Init();Error MX_DMA_Init(); MX_DAC_Init();WorkingIt may be CubeMX error?

When I analyze a code that another guy made, I want to track where a function is used.I can see the definition of a function using open declaration but I cannot see where the function is used.STM32 has so many files. So, I cannot search for each of them.Could you explain the way to see where the function is used?

Various STM32 products have opamps that have a mux in front of it.Ex: STM32G4, STM32F3, STM32H7 series, etc.If I change the mux input setting using the control status register (OPAMPx_CSR::VP_SEL or VN_SEL), how long does it take for the mux to switch to the new setting?The datasheet doesn't have this information.

Hello Community,I've B-U585I-IOT02A. I got this with pre installed web-server with react client. Whenever I was connecting it with terminal like tera term or minicom. It ask for configuring the wifi after successful configuration, it start the simple website at local wifi ip and show the graphs for sensors data.I was trying to find how we can read data of sensor from the Board for that I go through STM32CubeIDE. I generated the code for board with model name B-U585I-IOT02A . I click on build and run it ask to connect st link. I connect the board B-U585I-IOT02A . It shows the logs successfully downloaded and verified.After this when Now I'm connecting the board using st link to terminal like tera term or minicom. It doesn't seems to work. I try to flash it with webserver firmware using tutorial available on :https://medium.com/@vimalkumar.parthasarathy/demonstration-of-web-server-using-mxchip-wi-fi-module-in-stm32u5-b-u585i-iot02a-evaluation-board-7c7047a3412bBut after flashin

The board is a STEVAL-PTOOL1V1. The setup was tried on different boards.The programmer board used is a STLINK-V3SET.I followed the instructions on the `Getting started` document of the STEVAL-PTOOL1V1.I power the board through J1 and J2 with a power supply supplying 12V. I connected J8 with a jumper.I connected the SWD pins to the STLINKS.Here is the setup and the documentation for the SWD connector of the PTOOL1V1. In order to communicate with the board, I tried:- Uploading the example project of the STEVAL-PTOOL1V1 by clicking on the debbuger icon of the CubeIDE- Clicking "Connect" in STM32CubeProgrammer- Clicking "Connect to the target" in STM32 ST-LINK Utility- Using the Open source version of the STMicroelectronics STLINK Tools : stlinkHere are the errors messages for the first three:```STMicroelectronics ST-LINK GDB server. Version 5.9.1Copyright (c) 2021, STMicroelectronics. All rights reserved.Starting server with the following options: Persistent Mode : Disabled Logging L

I have this little project for the STM8L101F3 that just writes an arbitrary value to TIM2_CCR1H and TIM2_CCR1L and then tries to start the timer but I get nothing from the timer output.If I run the project with a debugger and inspect the contents of the registers, I find them unchanged. I tried this with IAR Embedded Workbench under Windows 10 and with sdcc/openocd/stm8-gdb under Ubuntu 20.04LTS and I see the same behaviour. I am using one of those generic STLINK-V2 dongles.I have another project that just toggles an IO and it works fine. I am just having trouble with TIM2.So just yesterday I received a brand new STM8L-Discovery. I then downloaded en-stsw-stm8008.zip from st.com and unzipped it.When I hook up the discovery board to my PC and run the IAR* project "Discovery", and while the debugger is stopped at main(), I open up a view registers window and bring up TIM2. When I try to modify any of the registers, they just stay at zero.What am I missing?*IAR EW STM8 V2.20.2

Hello. I've been trying to make the ADC work in my stm32mp157f-ev1 board. It is my understanding that I need BSP to make it work because when I disabled BSP in the ADC example code I noticed receiving the same result as my code. When I try to add the BSP files provided in the mp1 package I get errors saying that the I2C_HandleTypeDef is not defined. I tried to work around the issue but to no avail. Is there something I'm missing that I should do or what? Thanks for any help provided

Hello, i would like to get the mem size and block size but when i sent the request nothing is answer by st25t95

Hello,For various tests and especially for certification, I like to put the ST25R39xx into a test state in which it generates a continuous unmodulated field or a field modulated with random data (similar to NXP's PRBS test).Is such a mode available?How can I access this mode? Ideally via the RFAL library.The ST25R3916-DISCO board is FCC certified. Can you share the project / code used for FCC certification?Thanks in advane,Michael

Hello everyone, I am working with uC STM32F7 (main board)NFC Reader ST25R3916 ( pcb NFC reader)NFC ST25DV dynamic tag (pcb NFC tag)My project is working with freeRTOS and I have been writing my code based in the FreeRTOS_polling project from ST25NFC_EMBEDDED_LIB_ST25R3916_1.3.0. At this moment I am able to read/write different NFC Tag registers from NFC Reader without problems. I configured the NFC Reader in FTM mode so I am working with the 256 buffer. Once I detected my card and the rfal process is able to exchange info I put the next code. int32_t nfc_reader_wr(rfalNfcvListenDevice *nfcvDev , uint8_t *message, uint16_t len) {   ReturnCode err; static uint8_t tx_buf[200]; uint8_t *uid;   /*TEST WRITE*/ uint8_t rxBuf[ 1 + DEMO_NFCV_BLOCK_LEN + RFAL_CRC_LEN ]; /* Flags + Block Data + CRC */   // known data static uint8_t tx_msg[66] = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20\ ,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43

As per SBSFU memory mapping details, to download application remotely, we need to define ACT_SLOT, DNLD_SLOT and SWAP_AREA range.What is the typical size of swap_area ??For STM32H753, as we have 2MB Flash only and One Sector 1 127 KB, is reserved for Secure Boot, Then what is the maximum size of Firmware application we can store ??What is the limit on Application size ??

Could the BAF_BYPASS field in the BAF configuration DCF register by modified by the user.If yes, under which module can I find it? I'm unable to find this in Lauterbach debugger.If no, how can I skip the BAF section during the bootup? - My device has pre-programmed BAF region.Thanks!

Could you send us the datasheet of L9966, we want to know the difference of L9966 and L9966CB. Is L9966 EOL?

Dear All ,SPC5Studio Update sites are backin case of critical requests :contact us on credentials@spc5studio.com

Using SPC5 Studio 6.0-Clarke Error: Pin PIN_TCK: cannot find FunctionRef MSCR_512_0Error: PIN_TCK: Cannot find FunctionRef for MSCR_512_0Error: Pin PIN_TDI: cannot find FunctionRef MSCR_512_0Error: PIN_TDI: Cannot find FunctionRef for MSCR_512_0Error: Pin PIN_TDO: cannot find FunctionRef MSCR_512_0Error: PIN_TDO: Cannot find FunctionRef for MSCR_512_0

hi, I would like to know if it is possible to read mcu SPC56EL60L3 with usb / uart adapter with software SPC5 FLASHER?

I am working with a SPC582B60E1 64 pin Flat pack chip. I am trying to program GPIO11_INT24_PWM16_CAN4SYS1_RX_WKPU pin 53 as a PWM output. But I am not sure if it is even possible. I consulted the SPC5 LLD Drivers for RLA components document for PWM low level driver and in that section of the document has a diagram showing the physical and logical channels. I took a screen shot and attached it for reference. It shows that that of the eMIOSx channels, that channels 8, 16 and 24 do not have PWM Drivers. So does this mean it is not possible to set channels 8, 16 or 24 as a PWM channel? If they can be set to a PWM, could you include a code snippet to set it up? Thanks,Steve Lam

Hi. What are the differences between them?