About Amel NASRI

Amel NASRI · 2024-06-04

STM32U0 is the first Cortex-M0+ with a static consumption of only 160 nA in standby mode with RTC (Real-Time Clock) and 16 nA in shutdown. It also achieves 118 points in CoreMark and targets SESIP level 3 and PSA level 1 focusing on firmware code pro...

Amel NASRI · 2024-03-19

The new STM32H7R/S lines are built on the success of the STM32H7 series, offering even higher performance and security at a lower cost. The STM32H7R/S is a bootflash-based MCU powered by a Cortex®-M7 core running up to 600 MHz, with 64 KB of user fla...

Amel NASRI · 2023-12-07

NanoEdge AI Studio v4.3 is now offered for free to all engineers, giving them the opportunity to create highly efficient TinyML libraries that can be deployed on Cortex-M based microcontrollers. In addition, other enhancements have been integrated to...

Amel NASRI · 2023-09-21

The STM32H573I-DK is now available for order! It is the first kit to support Secure Manager, a turnkey system-on-chip that integrates core security services certified and maintained by ST. The STM32H573I-DK enables developers to explore all the integ...

Amel NASRI · 2023-07-18

We are pleased to announce that the latest version of NanoEdge AI Studio is now available. This new version brings improvements in performance and support for STM32 boards, as well as new features to help users earlier in the creation of their machin...

Amel NASRI · 2024-06-14

Hi @WWagner , Sorry to come back late to your case. It is possible that you have already resolved your issue and it will be interesting to share with us your solution in such case . We believe that it may help others to provide an answer here, that i...

Amel NASRI · 2024-06-10

Hello @Tomas Hamouz , No weird setup based on what you shared. What I suggest at this level is to contact your FAE who can make checks with your hardware to reproduce issue and go farther with the analysis. Please let me know if you opt for this. -Am...

Amel NASRI · 2024-06-05

Hi @DAlbe.3 , Back to the initial question, I believe that you need to check PWRRSTF value: then it is required to reset backup domain and enable LSI each time this flag (PWRRSTF) is set. This is what the errata workaround says: Are you checking th...

Amel NASRI · 2024-05-30

Hi @Kai_Satone , Are you able to connect properly to your device using STM32CubeProgrammer? Try to ensure an STLink firmware upgrade first. Do you still have same issue? -Amel

Amel NASRI · 2024-05-30

Hi @DAlbe.3 , Could you please insert the following wait loops to ensure that required bits are set properly: just after line 5 of your code to ensure that access to backup power domain is enabled: while(READ_BIT(PWR->CR1, PWR_CR1_DBP) == RESET); ju...

User statistics

User Activity

New possibilities for the ultra-low power segment!

STM32H7R/S lines: 1st STM32 with bootflash and on-the-fly encryption

Edge AI for all. NanoEdge AI Studio autoML tool, now free for STM32 and open to all ARM Cortex-M bas

STM32H5 Discovery kit accelerates building secure, smart, connected devices

NanoEdge AI Studio 3.4 is out!

Re: Potential Bug in stm32fxx_STLstartup.c V2.2.0

Re: STM32U575QII Dedicated OPAMP2_VINM pin not connected?

Re: STM32G030 erratum 2.2.1 workaround is not reliable

Re: GDB-server openocd

Re: STM32G0 Unstable LSI frequency