HI There!, I am new to STM32 and STM32CUBE IDE, i am trying to build a device using stm32f103c8 which can communicate with smartcard using St8024 smart card ic. and i have downloaded AN4800 example project and imported in to Stm32cube ide

[ALakh.1]

but i don't know how to make it work and how i can use the libraries provided with my projects. Please any help will be highly appreciated Thanks.

[Imen.D]

Hello @ALakh.1​ and welcome to the Community :)

Maybe you can review the Smartcard example available in the STM32CubeF1 MCU package, and follow the readme file to make the program work:

\STM32Cube_FW_F1_V1.8.4\Projects\STM3210C_EVAL\Examples\SMARTCARD\SMARTCARD_T0

To import the available Cube project from SW4STM32 to STM32CubeIDE, you can follow the guide UM2579: Migration guide from System Workbench to STM32CubeIDE.

I hope this helps !

When your question is answered, please close this topic by choosing Select as Best. This will help other users find that answer faster.

Imen

[ALakh.1]

Hi Imen,

Thanks for your quick response, but i have tried importing the "en.x-cube-smcard_v1.0.0" in cube ide, and i have changed pins accordingly in platform config.h, selected STM3210B and buil and successfuly uploaded code using stlink, but i don't know what happens next and how to read the data or sent to uart 2. I am sorry but i am totally new in this. :(

[ALakh.1]

and i don't want to use the library are there any commands like for HAL_uart, for smart card in cube ide when we initialize any usart as smart card with clock so i can use those and communicate with card. Thanks

[ALakh.1]

Hi Imen,

I followed the guide you provided and now i have uploaded the code to mcu, but it is not reading any data from Smart card. where you think error could be.

Thanks

[ALakh.1]

 while (HAL_OK != ATR_Read(&SCInterface, atr_buff, &atr_size));

this is the line where code stucks