X Nucleo IDW01M1 + Custom Board + Nucleo F767Zi

Question

Posted on September 01, 2016 at 22:48Hi folks, I am currently developing a custom expansion board for the F767Zi kit and I plan on using it along with an IDW01M1 board, the problem is I am having trouble finding out which pins from my F767Zi will be dedicated to the IDW01M1 board and which pins will be free for my expansion board. Can anyone help me out with that?So if anyone is interested in this project or can help me out in anyway you are welcome to contribute.  #x-nucleo-idw01m1

slimen · Answer

Posted on September 02, 2016 at 10:56Hi eduardoSP,You should refer to this http://www.st.com/content/ccc/resource/technical/document/datasheet/group3/c5/37/9c/1d/a6/09/4e/1a/DM00273119/files/DM00273119.pdf/jcr:content/translations/en.DM00273119.pdf  from http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f7-series/stm32f7x7/stm32f767zi.html page which detailed pin definition in the section (Pinouts and pin description) and Table 10.You can have look at  http://www.st.com/content/st_com/en/products/ecosystems/stm32-open-development-environment/stm32-nucleo-expansion-boards/stm32-ode-connect-hw/x-nucleo-idw01m1.html page, it maybe helpful for you with User Manual, ''X-NUCLEO-IDW01M1 Quick start user guide'' and http://www.st.com/content/ccc/resource/technical/layouts_and_diagrams/schematic_pack/76/c2/19/1a/28/e4/49/71/x-nucleo-idw01m1_schematic.pdf/files/x-nucleo-idw01m1_schematic.pdf/jcr:content/translations/en.x-nucleo-idw01m1_schematic.pdf document.Regards

Sign up

Login with SSO

Login to the community

Login with SSO