SPI ETHERNET (LAN9250)

[Ranjitha]

..

[Andrew Neil]

Welcome to the forum.

Please see How to write your question to maximize your chances to find a solution for best results; in particular, How to insert source code - not as screenshots.

 

As noted in your previous thread, the LAN9250 is a Microchip product - nothing to do with ST - so you need to go to Microchip for support with it:

https://www.microchip.com/en-us/support

https://community.st.com/t5/forums/searchpage/tab/message?advanced=false&allow_punctuation=false&q=LAN9250

 

---

@Ranjitha wrote:

 In the main function, I pass the RXDATAFIFO address (0x00), but I keep getting 0xFF as the output. How can I resolve this issue?

---

The first thing to do would be to use an Oscilloscope on the SPI lines to ensure that the signals are good.

Then use an analyser to capture the comms between your STM32 and the LAN9250, and verify that against the LAN9250 specifications.

https://www.microchip.com/en-us/product/lan9250

https://www.microchip.com/en-us/product/lan9250#Tools%20And%20Software

https://ww1.microchip.com/downloads/en/DeviceDoc/LAN9250-Quick-Start-Guide-50002993.pdf