Skip to main content
Andrew Neil
Andrew Neil
Super User
March 1, 2021
Solved

LSM6DSO vs LSM6DSOX

  • March 1, 2021
  • 1 reply
  • 2491 views

Is the only difference between the two that LSM6DSOX has the machine-learning core (MLC)?

In other words, are the 2 parts interchangeable when the MLC is not used?

This topic has been closed for replies.
Best answer by Eleon BORLINI

Hi @Andrew Neil​ ,

basically yes, if you don't mind the MLC feature the two part numbers are interchangeable.

-Eleon

1 reply

Eleon BORLINI
Eleon BORLINIBest answer
ST Employee
March 2, 2021

Hi @Andrew Neil​ ,

basically yes, if you don't mind the MLC feature the two part numbers are interchangeable.

-Eleon

Andrew Neil
Andrew NeilAuthor
Super User
March 2, 2021

Great - thanks.

So, if you have an existing design with LSM6DSO, you could just drop-in an LSM6DSOX to gain the MLC features?

In fact, I have an X-NUCLEO-IKS01A3 (with LSM6DSO) - so I could use that to get started, and just add MLC stuff later when/if I move to LSM6DSOX ?

A complex system that works is invariably found to have evolved from a simple system that worked.A complex system designed from scratch never works and cannot be patched up to make it work.
Eleon BORLINI
Eleon BORLINI
ST Employee
March 2, 2021

Yes, that's right, you can take a STEVAL-MKI197V1 and plug it on the DIL24 connector of the X-NUCLEO-IKS01A3 (without un-soldering previous LSM6DSO).

-Eleon

Terms & ConditionsAccessibility statement