Topic published in wrong product forum and tags removed

[fpier]

I created the following topic under MEMS (sensors) with the tags MEMS sensors, E-Compasses and STM32F4 series:

“Can MotionMC v2.9.0 calibrate with constrained Alt-Azimuth motion only?”
 

After publication, the topic appears under STM32 MCUs → Others: STM32 MCUs related, and only the STM32F4 series tag remains.

Could you please move the topic back to MEMS (sensors) and restore the relevant MEMS sensors and E-Compasses tags?

Thank you.

[Andrew Neil]

You mean this?

 

[fpier]

Yes, exactly that one.
I originally created it under MEMS (sensors) with the tags MEMS sensors, E-Compasses and STM32F4 series, but after publication it appeared under STM32 MCUs → Others: STM32 MCUs related with only the STM32F4 series tag.
Thank you.

[Andrew Neil]

Well, the question does seem to be about the embedded software rather than the sensors themselves?

[fpier]

Yes, it is about embedded software, but specifically about the MotionMC MEMS middleware/library and its magnetometer calibration algorithm when used with the LIS2MDL.
That is why I originally selected the MEMS (sensors) forum and the E-Compasses tag rather than a generic STM32 software forum.
However, if STM32 MCUs → Others is considered the appropriate place for MotionMC software questions, I am happy to leave the topic there. My main concern was making sure it is visible to people familiar with MotionMC / MEMS software and keeping the relevant MEMS/E-Compasses tags.
Thank you.