We have a custom PCB application that uses the STM32MP151CAC1 as the main CPU. We have tried to use an STLink v3 to connect to the chip over SWD, but have been unable to do so. The chip (through UART4) throws the following error when I try to connect...
I'm trying to set otg on stm32mp157d in device only mode, according to the guidance on OTG device tree configuration - stm32mpu (stmicroelectronics.cn), &usbotg_hs { compatible = "st,stm32mp15-hsotg", "snps,dwc2"; phys = <&usbphyc_port1 0>; ...
I am new to STM32 boards and IDE but have an STM32MP157A-DK1 board which came with an SD Card / OS on it. We want to make our own OS image using the ST linux.In the downloads accompanying the workshop videos we have the DK2_TIMER1_OpenAmp_Solution to...
Hi,We are using stm32mp157a processor in my custom board. I need to change MAC address because in uboot log it is showing it is showing invalid MAC address. I am setting MAC address using setenv ethaddr 11:22:33: 44:55:66 command. But when i set etha...
Hi, I got the result as below while I was building kernel images (uImage and vmlinux) and device tree (dtbs). Can anyone help me fix it?$ make ARCH=arm uImage vmlinux dtbs LOADADDR=0xC2000040 GEN Makefile CALL /home/rickweng/STM32MPU_workspace/STM...
I've build chromium from meta-browser for stm32mp157 dk. When run chromium I'm getting:/usr/bin/chromium: error while loading shared libraries: libgbm.so: cannot open shared object file: No such file or directoryWhen use wayland version everything wo...
In AN5031 Rev4,Figure 49. Gigabit Ethernet 2-port switch example with VDD = 3.3 V (RTL8363NB-VG)There is the RTL8363NB used, but I can't find the driver anywhere.Can you provide the driver file or tell me where it is?
Hello!I am trying to replicate the workshop STM32MP1 - 11 Inter-Processor Communication Lab Example. I create a new STM32 project and copy all the data from the lab example. Then I connect the device (STM32MP157C-DK2) but the /dev/ttyRPMSG0 does not ...
We quite recently learnt of the move from U-Boot SPL to STM32DDRFW-UTIL and that the MX too would not longer work with the former. That wasted a decent amount of time.The problem is although the code for STM32DDRFW-UTIL is available our PMIC is on I2...