Hi All,Please I`m working on a project that uses kvssink ( Aws Kinesis Gstreamer Plugin) that project uses log4cplus and openssl what uses Perl. During the cross compilation there are many perl modules missing from the SYSROOT what is the latest Deve...
Hi,i´m using a stm32mp157-dk2 and want to increase the size of the rootfs partition to 2GB.To create the image follwed the instructions from https://wiki.st.com/stm32mpu/index.php/STM32MP1_Distribution_Package#Installing_the_OpenSTLinux_distribution ...
I was planning on using the STM32MP157A-DK2 to drive a three lane DSI display but the Microcontroller only supports two lanes..
Hi,I have already post a similar issue in the previous post.I'm using initramfs shell using initramfs-framework in Yocto environment.I found that watchdog reboots after some time (the default is 32 seconds) if the initramfs doesn't fully boot the sys...
Hello,How to install a USB printer support? I've tried apt-get install cups but this no work. Thanks,Alex.
We are using the STM32MP15-ecosystem-v2.0.0 on an EV1 board.We need to disable the sdmmc1 / sdmmc2 nodes in the DT, so we are adding the following at the end stm32mp157c-ev1.dts:&sdmmc1 { status = "disabled"; }; &sdmmc2 { status = "disabled...
I am trying to enable some GPIO as external interrupts and have run the GPIO example where the user button is set as an interrupt. Is there any resources that show what GPIO can be used as external interrupts? For example, I would like to set one of ...
Hello again dark electronics wizards.I've been looking for some documentation about how to use an external flash memory with my stm32 designs.Is there any magic way to do this? Or could anyome point me to the right way?My goal is to add a qspi contro...
I have read in the wiki that the xlinux packages for ai inference and etc are only for evaluation purposes. I need to have more clarifications so to decide to use it in our product! Is there a coming release of software ready for production for examp...
Hi,I'm working with the stm32mp157f-dk2 and with OpenSTLinux and I'm trying to create a GATT service for provisioning the wifi credentials.The problem is, according to https://wiki.st.com/stm32mpu/wiki/How_to_scan_BLE_devices I should be able to run ...