As the headline suggests, I would like to know if ST has a proper API documentation for libiio.All I found was this : https://wiki.st.com/stm32mpu/wiki/How_to_use_the_IIO_user_space_interfaceBut I am not interested in shell commands and scipts.There ...
Hi!When I use this device tree nodes, or very similar. I get this error code:As you can see, I'm getting this kind of errors. I don't know if the Device Tree or the IC chip is faulty. I would like to know if there are any ways to find out if the IC c...
Hi，I am now adapting the stm32mp13 bare metal bootloader FSBLA_Sdmmc1 for stm32mp157, and have achieved good results. However, since the sd card partition table of stm32mp13 is different from the common gpt partition table, the full function of this ...
Hello everyone.I have a problem compiling my Yocto for stm32mp157c-dk2 project. I run the bitbake command from build "bitbake -e core-image-minimal".I get the error message:Error, the PACKAGE_ARCHS variable (all any noarch ${PACKAGE_EXTRA_ARCHS:tune-...
Hi ST Team,Hi i am trying to add the x11 support for Stm32mp1, but how to setup i do not know.* **st-example-image-x11** (with **openstlinux-x11** distro):Image which demonstrates an example of Basic X11 usage.* **st-example-image-xfce.bb** (with **o...
We are doing a custom board bring-up and currently trying to display video on our display device. We use CubeMx to generate the device tree for our project and some user code there. we can see DSI data lanes signals but not DSI clk signal. We did som...
Hello,I have a custom STM32MP131AAE6 board and it has a 7GB eMMC storage.I am using Yocto (mickledore) as a build system.I want to allocate 2GB for my rootfs-a and 2GB for my rootfs-b.I have no issue with automatically generating a FlashLayout for 2 ...
Hello,We are using st-image-core from recipes-st in yocto and I'm removing some packages from the build that we don't really need. While going through the list, I have found that apt and dpkg are being built and I would like to remove them from my im...
Dear ST,Is there any roadmap for the next release of OpenSTLinux based on latest LTS kernel 6.6 ?Thanks in advancePatrick
According to the wiki here: ROM_code_overview, the pins to boot from a serial NOR flash chip can be modified by the OTP Register. I understand that I must set the bit 0 of the word 3 to 1, but how do I define which function I move to another pin? whi...