Hi all,I have been trying to boot a custom ST32MP15 board, I get through TF-A and U-boot, but boot fails while Starting Kernel.I had some issues with external 24MHz crystal so I am using HSI to provide CPU clocks. On TF-A and U-Boot device trees I wa...
u-boot yocto build fails with this messagetest -e arch/arm/dts/stm32mp157c-mydemo-mx.dtb || ( \| echo >&2; \| echo >&2 "Device Tree Source (arch/arm/dts/stm32mp157c-mydemo-mx.dtb) is not correctly specified."; \| echo >&2 "Please define 'CONFIG_DEFAU...
Hello,I am trying to read an analog value of PA4 of the STM32MP157CAC with ADC1 but it does not work.I am using from Emtrion the emSTAMP-Argon as module.I also tried to read the internal temperature sensor instead with ADC2 but that failed as well.I ...
I am making a board using STM32mp151a. I want to write Linux OS to the SD card. However, the command on the web page below only has STM32mp153 and STM32mp157 for the evaluation board. https://wiki.st.com/stm32mpu-ecosystem-v5/wiki/How_to_create_your_...
We are migrating from the Kirkstone eco-system to the Mickledore eco-system. We found that the extlinux.conf file that gets created is identical in the two builds. However, u-boot now forces a menu to the user, even though we have CONFIG_BOOTDELAY=-2...
A particular STM32MP1 based board uses the USB OTG interface configured to the cortex A7. Is there any guidance how to configure the kernel so that it will use the USB device port with a gadget driver, so that the host sees it as keyboard, serial por...
Hi :)Working on the EVA32MP257F, I am trying to generate the openstlinux for it, however, I see no target MACHINE in the yocto project for it. I guess that a private repo is required for this?Also, can I apply the RT patch provided for the MP1 on top...
Hello,I need to synchronize the time between the A7 and M4 cores. While I found some resources on the ST Community that accessing the STGEN timer from the A7 side.the article is belowhttps://community.st.com/t5/embedded-software-mpus/how-can-i-get-ac...
Hi everyone,I'm using STM32g491 and rs485 modules. I'm trying to transmit data from uart1 with DMA when I receive data. There is a dilemma it transmit data but also does not? When I try to send a buffer which defined on stm's code, it transmits but w...
Hi,I am trying to set the rootfs read-only. With other yocto based environments I usually setEXTRA_IMAGE_FEATURES ?= "read-only-rootfs"in local.conf. Using OpenSTLinux this results in a build error: ERROR: st-image-userfs-1.0-r0 do_rootfs: Unable to ...