On dev board STM32MP157f-dk2, I ran application in Qt, several gauges and measurements on DSI display... Next I connected CAN device to board and when a lot of frames arrive, appear a problem with tmpfs /run full ,like below:What can I do with this ?
Hi,I am built OpenSTLinux with below configuration: uild Configuration: BB_VERSION = "2.0.0" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "universal" TARGET_SYS = "arm-ostl-linux-gnueabi" MACHINE = "st...
Hi, I would like to use CAN communication on my devboard : STM32MP157f-DK2. So I prepared OS, unfortunatelly I have to flash STM32MP157c-DK2 version according with problem described below: Faulty boards out of the box So, after run OS, I edited *.dt...
Hi,I'm trying to learn programming STM32MP157 with qt library using boot2qt module.I flashed microSD card using boot2qt module, prepared and employed samlpe project from qt Creator to STM32MP157. - this works fine.Now I would like to control interfac...
Hello,Hello,I'm planning to integrate GPS: GNSS1 and install a web browser on an STM32MP157F-DK2, so I'm looking to add layers.Before adding the layers, I thought it would be a good idea to follow this tutorial:https://wiki.st.com/stm32mpu/index.php?...
Hi all, I want to flash my EMMC using sd card? Do you have any guide or useful link for this?I have used Variscite SoM before and I was able to do it using yocto_install.sh script generated from yocto.How can I do this on STM32MP13X series? Regards
Hi, I want to use the M4 core to handle all Audio DSP workI can see that MXCube allows the SAI ports to be enabled on the M4 coreBut it appears the I2S ports are not. I am Missing something hereUnfortunately the Pins I need to be the PZ0-1-2-3 as PC...
I have both Board "stm32mp257F-dk - F-ev"I try to install chromium on the STM32MP2 , and Successfully installed chromium ,I try to play video on YouTube it is to lagging , smoothly play on 360p only, without YouTube i treid different method to play v...
I am in the process of starting a board with an STM32MP153CAB processor, unfortunately due to an error in the design, the I2C4 interface is not available( i2c4 is connected to the PMIC by default). I am able connect I2C2 directly to the PMIC, but thi...
Edited console output - see here for future referenceHello,I encounter a problem with my LCD from Winstar model WF50DTYA3MNG10.I have a custom board based on STM32MP157 with a display connected to Mipi 2 lanes.On previous Openstlinux(kirkstone) witho...
