Dear MCSDK users, MCSDK version 6.3.2 is now available: Download It here. This is a bug fix release and here are the main changes for this version: Motor Control Features: FOC Fixed CORDIC Modulus computation in case of negative alpha value Fixed iss...
The documentation of the Board descriptions format is now available on Motor Control Boards Description Wiki page, this documentation is compatible with MCSDK versions from 6.1.2. Board Descriptions are used by the ST motor-control workbench to enabl...
In order to have a quick response to your forum posts, the best way to ask the question is:- Give the version of the MCSDK used. - Say if the problem concerns a tool (MC Workbench, Motor Pilot, Motor Profiler, etc...) - Provide picture of tools inter...
Motor Control Wiki: STM32 Motor Control Knowledge Database - stm32mcuMC Frequently asked questions (FAQ):Frequently asked questions (FAQ) - stm32mcu The documentation of the Board descriptions format is now available on the Motor Control Wiki: Wi...
I want to use HFI to start the motor. Does ST provide any relevant documentation or code?
MCSDK v6.3.2 It looks like the STM32 is failing to PWM fet gates and that's resulting in high current and an Under Voltage fault.I made a board with the STM32G431RBT6 and DRV8323 driver chip. I've used the DRV chip in another board for a long time wi...
MCSDK Version is 6.2.1.I'm currently having the issue that our motor doesn't reach the configured application speed of 7600RPM.It stops increasing in speed at around 6500RPM.The motor is slightly loaded for my tests. I'm running in Torque mode with t...
Hey, I had recently purchased an EVSPIN32G4 board, and I'm currently trying to use the MCSDK to generate code for it.When I'm trying to generate code for it, it completes with the following error:How can I solve this issue?Thanks,Eyal
Dear all,I have a NUCLEO-F302R8 and the X-NUCLEO-IHM07M1 motor driver expansion board. I have a three phase BLDC motor with an encoder attached to it. I want to implement a torque controller. I am able to use the workbench software to implement the t...
Hi,I am developing on EVSPIN32G4, MC Workbench 6.1.2.The only option for Over Voltage Protection is to turn on Low Side Switches. This unfortunately doesn't work as I still constantly get Over Voltage faults in position control mode, when the motor i...
Complete
Can use STM32H723 in X-CUBE-MCSDK Ver.6.2.3?
Hi, I'm using MCSDK 5.Y.2 and STSPIN32G4 on a custom board. (this is a software thing !)I couldn't find a way to get two (more than one) converted ADC Values using a single request using the RCM.So I carried on converting each channel sequentially.I ...
Hello,I started development on the EVSPIN32G4 development board. After generating the project in MC Workbench, the resulting CubeMX project shows up with a STM32G431VBTx MCU. This is a LQFP100 package, but the STSPIN32G4 is only a 64pin device. I am ...