Dear MCSDK users, MCSDK version 6.3.2 is now available: Download It here. This is a bug fix release and here are the main changes for this version: Motor Control Features: FOC Fixed CORDIC Modulus computation in case of negative alpha value Fixed iss...
The documentation of the Board descriptions format is now available on Motor Control Boards Description Wiki page, this documentation is compatible with MCSDK versions from 6.1.2. Board Descriptions are used by the ST motor-control workbench to enabl...
In order to have a quick response to your forum posts, the best way to ask the question is:- Give the version of the MCSDK used. - Say if the problem concerns a tool (MC Workbench, Motor Pilot, Motor Profiler, etc...) - Provide picture of tools inter...
Motor Control Wiki: STM32 Motor Control Knowledge Database - stm32mcuMC Frequently asked questions (FAQ):Frequently asked questions (FAQ) - stm32mcu The documentation of the Board descriptions format is now available on the Motor Control Wiki: Wi...
Hello,i am beginner in ST motor control domain.I have installed the following software versions :MC workbench v6.3.2CUBE IDE v1.16.1CUBE MX v 6.12.1I have a problem when trying to connect my board using profiler. In log, i can see the last two messag...
Good morning,I would like to see if there are alternative components to the kit (P-NUCLEO-IHM03) to test 48V 1KW BLDC motors. Do you have any recommendations for expansion boards?Thank you in advance.Nazario
My goal is to connect 2 internal PGAs to 1 ADC (especially ADC2). I configured in CubeMX and generated source code. However, when I checked the ADC channel initialization code in IDE project, I could see that only one channel is activated in ADC2....
Hello, I use the EVSPIN32G4 to test some brushless motors. On ST motor workbench there is an option called: Quasi-synchronous rectification in PWM generation.There is nothing on the board documentation about it. I'am quite familiar with both synchron...
Currently, I am using FOC control in MCSDK for position control, and the speed graph appears as shown in the attached figure when the motor moves to its target position. However, I want to achieve control where the motor maintains its maximum speed f...
Hello,Is there a way to get schematic reviewed without sharing it publicly? My company doesn't allow public posts, so wondering if there is any possibility private reviews. Thank you!
I am trying to implement a Phase Locked Loop in a microcontroller STM32. I have a reference signal and feedback signal which has $\phi$ difference wrt reference signal. For the moment, I am not using a real time feedback signal, rather simulating it ...
I have tried connecting both STLink and UART but Motor Pilot is not getting connected, ERROR: No STLink VCP detectedI am using (V1.2.9) and tried using older version but still issue persists. Kindly help.
Hello everyone, I'm working on a motor control project using an STM32 microcontroller (TIM1 and TIM8 timers), and I need to implement a soft Break to safely stop the PWM signals with proper transitions (respecting Dead Time and setting the outputs to...
Hi ST Team, I'm trying to use this discovery kit at the moment to try control a brushless dc motor, so I would like to profile the motor performance but I'm stuck with trying to configure the board/setup despite following the instructions (UM2516 - w...
