I keep getting the message "Pack Installation Failed. The installation directory may be write locked."I have full administration on the PC (Win 10) and plenty of space, so...?? Appreciate some advice.BR
I require to run 3 clients. I start 3 lwip threads using sys_thread_new. Each thread will service 3 python clients via 3 distinct Ports. Everything seems to be working when running only 2 threads . However, when a third client is added things become ...
I am currently writing a code to send joystick data from a PC to an STM32 Nucleo board. I use pygame to read joystick values and use the socket library of python to send data to MCU via a router. Both MCU and PC is connected to the router. On the MCU...
For some context, we are prototyping a mobile device and want to achieve good quality stereo audio so we'll be buying some samples of various low power mobile speakers, but want to be in the right ball park before we iterate on final designs.
Dear Experts,I would like to start with the STM32H755 device, which shall have the interfaces,EthernetEthernet over SPIMay I have your inputs on identifying the eval board, Ethernet to SPI adapter card to start with?Thanks
I am trying to implement bootloader code , that run an application code in STM32F407VGT6 micro controller. I have written two different codes one is bootloader and other is Application. My question is How two different code loading at different flash...
Hallo. I use stm32h747 with touch gfx. I connected PDM microphone and have error in decoding PDM to PCM, it looks Touch gfx use CRC module and stop PDM to PCM decoding. Is possible use at one system tgfx and PDM ?BR
Hi,I am trying to enable flash readback protection (level 1) on a STM32F411VET6 using the following HAL code: FLASH_OBProgramInitTypeDef OptionsBytesStruct = {0}; HAL_FLASHEx_OBGetConfig(&OptionsBytesStruct); if (OptionsBytesStruct.RDPLevel...
Using STM32CubeMX have configured the USB FS device, Debug with 5-pin interface and the SDMMC as an 8-pin interface to drive an eMMC component. The tool is flagging the USB device with a yellow triangle and when you hover on it, the message states p...
Hello everyone,I have a small project of sending a serial messages to a remote device using Ethernet. I decided to use LwIP with Netconn API and FreeRTOS to divide the design into threads and send the data using Ethernet. I made multiple threads an...
