Hello,Now I'm testing 50msec regular Stop and wakeup usingHAL_RTCEx_SetWakeUpTimer_IT(&hrtc, 102, RTC_WAKEUPCLOCK_RTCCLK_DIV16);Firstly I expected HAL_RTCEx_WakeUpTimerEventCallback() is done every 50msec but in real it was far faster than expexted.H...
@Saket_Om This solved the privileged calls but Im hitting the next obstacle with `undefined reference to `MPU_xTaskCreate'`.Im creating a task using `xTaskCreate` which gets redefined at https://github.com/STMicroelectronics/x-cube-freertos/blob/b0f4...
I want to receive data from my host PC through USB. I'm using the STM32C0 series nucleo board as USB HID device. I have assigned the value of capslock to the user button. and when the button is pressed i want to turn on the user led on the board. the...
Hi, I'm trying to use https://www.st.com/en/embedded-software/x-cube-eeprom.html on my custom stm32g030 board.Following the examples I write this code: HAL_FLASH_Unlock(); ee_status = EE_Init(EE_FORCED_ERASE); if(ee_status != EE_OK) { Erro...
Hello, while testing the STM32Cube Ux_Device_* examples for STM32C071, I have encountered an issue of them not properly finishing USB enumeration. For example, both Ux_Device_HID and Ux_Device_HID_Standalone stall after the configuration descriptor p...
Hi,I am working on an external loader for STM32G491.For STM32F4 series microcontroller, everything works fine, but STM32G491 does not work.I observed that the external loader program is loaded into RAM, but does not execute.I did some tests with runn...
I've tried so much stuff from official examples, unofficial examples, AI, debugging, forum posts, etc., that at this point I think it might be best to describe my understanding of what should be necessary to access the onboard microphone, and hope th...
Hi,I was wondering if there's any reference application or if you have any advice on drivers to capture video from a MIPI CSI-2 image sensor (perhaps Sony or the ST BrightSense image sensors (VB1940 (active) or VD1940 (preview) match the 5.1 MP dimen...
Hello could anyone advise where to find the example projects (demonstration code) for F407 discovery board? the code that was embedded when you first get hold on the new board before starting programming, where the 4 LED blink according to the onboar...
Hello,We are using STM32H745XIH6 Microcontroller for our designed custom boards. We have designed two boards named controller card (i.e. with the mentioned microcontroller mounted) and the other Power supply card.The I2C signals are generating from t...
