Please help to verify DC of component STB23NM60ND.
We bouth it from RS component and there is no original label on the reel. I have only made in China 0036791071 0164248690. Do You recognize those numbers?Thank You.
Others: hardware and software
Discuss hardware and software design challenges, including NOR flash storage, OTA updates, component ID, and thermal management.
Forum Posts
Request product confirmation
HiThe product in the picture we attached is damaged and is about to be replaced.It is difficult to find information about the products below.Can I get the same product?Also, is this an EEPROM?Answers I'll wait.thank you.
Resolved! AS21P2TLR peak switching energy
I have a capacity of 40nF on the S2 pin, charged to a voltage of 3.3V.The D pin is at GND. The 40nF is then discharged through the analog switch. The peak current will be around 6.6A for a very short time (if the analog switch has 0.5 Ohm resistance)...
I want to reduce the power consumed by SD card
Hi,We have designed an audio system where I have interfaced MEMs microphone and freq is 32KHz and I am storing files in the SD card. The files we record are getting stored in it in real-time so sd card is continuously in use.So, we have tested that i...
Top Marking on UFDFPN5 for M24XXX chips
What is the top marking for the following components?M24C32-FMH6TGM24C64-FMH6TGM24128-BFMH6TGThese are all UFDFPN5 packages.When marked with "4E", is that engineering samples?Is the marking "4EFT" for any of the above points?Thanks in advanced!BR,Frí...
ST M24C02-FMC6TG
I need a formal MTBF/FIT/Reliability report for the subject PN for my product life prediction. Thanks.I need to see the FIT's at different confident levels, temperatures, ..etc. Is there a site link I can obtain the data similar your competitors offe...