The LSM303AGR chip is used in Android device. I use STMems_Android_Sensor_HAL_Input sensor HAL from https://www.st.com/content/st_com/en/products/embedded-software/mems-and-sensors-software/drivers-for-mems/androidhalinput.html.The magnetometer works...
Hello,I am looking to scan a 2D surface with the ROI feature of the VL53L1X. I have been following the doc UM2555 and using the Polulu ST API but I can't get it working properly. The wall is at 1.6m and the object at 48 cm. The precision is not the i...
Hello,i use iis2dh (STEVAL-MKI168V1) on Arduino Due through spi.unfortunately, the y axis does not respond (I tried 3 development boards!).if instead use STEVAL-MKI135V1 board the same firmware works.could someone help me?best regards,Francesco
I am trying to generate simple code to use with sensortile.box, where i have the LSM6DSO connected and BLE makes a virtual COM port. I HAD incorrectly set up CubeMX to generate the files, so it wasn't actually pulling in mems/ble files. And the binar...
I am already able to build firmware, which blinks LEDs, but I would like to cut some corners.
The STMicro's Cube-MEMS software contains a function "MotionMC_SaveCalInNVM()" with the comment "No need to call this function, library call this function automatically". I am running the Cube-MEMS code right now. I put a break in the code. But nothi...
Hello, I would like to know if it is possible to solder the LIS3DHTR sensor with the vapor phase soldering process. I still checked the TN0018 document but couldn't find any hint.Thank you!
Hi, From where can i get vl53lx1 linux kernel driver?Is there any compatibility or modification required in vl53l0x to make it work for vl53l1x.Please clarify me on this.Thanks,
