I write four bytes of data to M95512, and after the writing is completed, I read these four bytes. I must delay the writing for more than 3 milliseconds to read the correct bytes. Delays less than 3 milliseconds will read 0XFF. Why is this?What does...
Hello, I found this chip, but I can't find the package, nor the part number of this chip, please help me, thank you!
Hi,Could you please provide the following details:The TJmax (maximum Junction Temperature)RJA(Junction to ambient Thermal resistance)Thank you in advance!Regards,Sathya
Hello,We are making a design LED1202 (QFN20) and need thermal resistance(janction to ambient). What is the thermal resistance (junction to ambient) except for the JEDEC PCB(2S2P).We use smaller copper area of printed circuit board or less layer than ...
Hello, I'm Jade.We are using ST Micro's M24C04 parts.I bought the parts, but the shape of the imprint is different, so I'm inquiring about which one is real.Please refer to the picture below. Lot information is the same, but ST mark is different.Than...
i want to know the weight of the below component M24512-DRMN3TP/K.
Hello, I am trying to write to this EEPROM and when I do, what I read back is always some other data, as if the EEPROM is write protected. The sequence of instructions I am using are: CMD 0x06 - Write Enabke CMD 0x05 - Read status register, returns...
I have a design that used an M95010-W and can read the Status as well as set the WEL bit and read it back in the status. However when I try to write data starting at address 0 with the command string 0x02 0x00 followed by data in the same SPI frame ...
Hello,I need to and a FOTA to my application.I will receive the firmware with BLE and store it on M95P32 EEPROM. Then i need to load it on the mcu (STM32WL).I cannot find any example or resources that explain how can i load a firmware from M95P32 EE...
Hi, I require assistance in finding the reliability data for the products. I have search through the website but regrettably, I have not been able to find the required information. The components of interest are identified by the part number STM32L07...