This document: https://www.st.com/resource/en/user_manual/dm00082034-standard-software-driver-for-c90lc-flash-stmicroelectronics.pdfdescribes a flash library intended to be used with JTAG on the SPC5 family, which we would like to use for our CI. How...
Hi All,I'm looking for Flash write, Read and erase APIs for SPC560 series controller. I'm not finding any example code with source code. I have checked the example bootloader code and it's not self explanatory. Please help me to find one. Thanks,Basa...
Hi,One question at the beginning: how to clear interrupt flag in SPC582B50 for "Flash controller Prog/Erase/Suspend IRQ" (vector 185)? I can't see any related interrupt flag in the manual, MCR.DONE also cannot be cleared manually.Once IRQ related to ...
Hi,I am trying to include Flash Driver component into my project of SPC560B50L1.I have added it from available components and it appeared in project as shown on attached screenshot.Then I wrote simple procedure, but linker says that flash driver's fu...
Hi All,I have two applications Bootloader and main application. I'm using UDE STK4.10 to program the board. I want know How I can load bootloader with out erasing the Main application flash memory and same for the main application write. while updati...
Dear All,I work with SPC56EC64 and have a question about debugging. For debug, I use SPC5-UDESTK debugger. Now I can't access a flash. During programming popped communication error. Since I can't access the flash memory to read or write. If I configu...
I am using a SPC56XL70.
Posted on October 05, 2017 at 16:00I need to programatically implement censorship on a SPC560B60x. So this would involve unlocking and erasing the shadow sector and immediately writing new values for NVPWDx/NVSCCx.Unlocking involves LML[TSLK]/SLL[S...
Posted on December 21, 2017 at 14:42i am developing boot loader for spc56ec64l7 controller.my bootloader application is at address 0x00 and boot loadable application is from 0x0001_0000. i integrate flash driver from one demo project.when i try to u...
Posted on August 16, 2017 at 11:06Hello community,I have 2 SPC56EL70L5-DISP boards and I am messing around with FlexRay.Today I was not able to program one of the boards anymore (with the same code as the other board).The UDE Memtool shows the error...
