Does the SPC560 can program in appilication (IAP) ?How CAN I do to implement the user bootloader? Is there any document about it? and the Chip has the BAM, is it means that ,I can user the factory bootloader to update the program via usart or FlexCan...
I would like to write a simple boot loader to be uploaded to SPC58's RAM by BAF (according to "Boot Assist Flash" section of RM).The boot loader's job is to receive the program by LinFlex or CAN and store to MCU's flash. All this without need of usin...
The bootloader is changed to wait for a time to check for CAN frames, otherwise it will give the execution to the application code. RTOS with 2 tasks are running, but not with 3 tasks.
Hi All,I'm looking for Flash write, Read and erase APIs for SPC560 series controller. I'm not finding any example code with source code. I have checked the example bootloader code and it's not self explanatory. Please help me to find one. Thanks,Basa...
Hi all Can anybody help me to get documents for programming SPC584b7 with (CAN OR UART)??
Hi All,I have two applications Bootloader and main application. I'm using UDE STK4.10 to program the board. I want know How I can load bootloader with out erasing the Main application flash memory and same for the main application write. while updati...
Hi All,I'm developing a secondary bootloader to load my main application to flash memory. I used example bootloader code for my controller SPC560L3. I have some questions related to the linker files. How I can create separate linker files for my Boot...
Hi All,I'm searching for example Bootloader code for SPC560P50L3 controller ( 100 pins package). I tried import from the example code in SPC5 studio, but it is for a SPC560P50L5 controller. How I can convert this code SPC560P50L35controller ( 144...
Hi All,We are implementing secondary bootloader and want to know what are the changes need to make in the linker files. what is the file and how to configure it for bootloader and application.Please let me know how I can do it.please provide any exam...
I want to develop a bootloader for SPC560p40l3 controller.I've read about BAM and SBL.But that method is Hardware dependent, i.e we've to give 1 logic to a[4] to get it into boot mode(CAN/UART).I don't want to use the internal Boot module.Is there an...