Automotive MCUs

cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

How to install your Root Certificate in StellarStudio JRE

When installing some StellarStudio  plugins http://*.srxstudio.org , you can meet the issue : sun.security.validator.ValidatorException: PKIX path building failed  It is typical IT Issue  in each corporate company. “"Path building" refers to the pro...

StellarStudio SR5E1 support is open to the mass market !

Dear all,   We are thrilled to announce that as of today, March 1st, 2024, SR5E1 device support in StellarStudio is available to the mass market !   This means that any user can effortlessly download the official StellarStudio installation packag...

preview.png

SPC58EC-DISP USB to Serial connection

I want to read and write data by serial connection.For test, I import samples "SPC58ECxx_RLA SERIAL Test Application for Discovery" from application library.In my understanding, the "main.c" function write "Hello World!" by serial connection.my envir...

jchoi.1 by Associate
  • 764 Views
  • 2 replies
  • 0 kudos

Current consumption of SPC584Cx in Max run mode

I work with this component and i want to estimate the maximum current consumption, in the other MCU there is section how talk about maximum current consumption in run mode or I can simulate with cubeMX but with this MPU I don't found this parameter, ...

SMELL.1 by Associate
  • 597 Views
  • 2 replies
  • 0 kudos

SPC582B-DIS (Can't establish connection to target)

I bought this spc582b-dis board. Successfully uploaded the code to the board a several times.After a while I couldn't connect the board to the ude. This message shows up when I'm trying to connect the board to the UDE  . (Device manager isn't showing...

DSC_0738.JPG DSC_0737.JPG
SSoor.1 by Associate
  • 1325 Views
  • 1 replies
  • 0 kudos

Resolved! Functional Safety Manual for SPC57x and SPC58x?

Hello,we consider using SPC57x or SPC58x for our products. I did find Safety Manuals for STM8 and STM32 but non for SPC5x. I know the chapter in the Reference Manuals with explanations of the CRC, STCU2 ... modules but I'm missing a complete list/tab...

F71334 by Associate II
  • 1550 Views
  • 1 replies
  • 0 kudos

Resolved! SPC58 setting

What are the settings in the attached picture?When a can interrupt comes in, are you setting whether to receive it through core 2 or core 0?

hans536 by Associate III
  • 896 Views
  • 2 replies
  • 0 kudos

SPC58 : This is a question about the spc58 CAN BUS.

Currently I am making a can gateway system.​After receiving the data through can interrupt, task send data periodically.​The problem is that sometimes strange values ​​are sent when sending.​For example, a value of 10 was being received, but other va...

hans536 by Associate III
  • 754 Views
  • 1 replies
  • 0 kudos