====================================================================== = (C) COPYRIGHT 2017 STMicroelectronics = = = = Secure Boot and Secure Firmware Update = ====================================================================== = [SBOOT] SECURE ENGINE INITIALIZATION SUCCESSFUL = [SBOOT] STATE: CHECK STATUS ON RESET INFO: A Reboot has been triggered by a Hardware reset! INFO: Last execution status before Reboot was:Executing Fw Image. INFO: Last execution detected error was: No error. Success. = [SBOOT] STATE: CHECK NEW FIRMWARE TO DOWNLOAD = [SBOOT] STATE: CHECK USER FW STATUS = [FWIMG] SLOT_ACTIVE_1 state = 1 A FW is detected in the slot SLOT_ACTIVE_1 = [SBOOT] STATE: VERIFY USER FW SIGNATURE [MPU] Region 1 with 4 sub-region(s). [MPU] Region 2 with 0 sub-region(s). = [SBOOT] MPU REGIONS CONFIGURATION Region 0 @:0 size:1d sub:0 perm:3 exec:1 Region 1 @:8000000 size:10 sub:f0 perm:3 exec:0 Region 2 @:800c000 size:d sub:ff perm:3 exec:0 Region 3 @:8000000 size:8 sub:0 perm:5 exec:0 Region 4 @:1fff7800 size:5 sub:0 perm:0 exec:1 Region 5 @:40000000 size:1c sub:0 perm:3 exec:1 = [SBOOT] RuntimeProtections: 1300 = [SBOOT] STATE: EXECUTE USER FIRMWARE ====================================================================== = (C) COPYRIGHT 2017 STMicroelectronics = = = = User App #A = ====================================================================== =================== Main Menu ============================ Download a new Fw Image ------------------------------- 1 Test Protections -------------------------------------- 2 Test SE User Code ------------------------------------- 3 Multiple download ------------------------------------- 4 Validate a FW Image------------------------------------ 5 Selection : ================ New Fw Download ========================= -- Send Firmware -- -- Erasing download area ... -- -- Programming Completed Successfully! -- -- Bytes: 19776 -- Image correctly downloaded - reboot [MPU] Region 1 with 4 sub-region(s). [MPU] Region 2 with 0 sub-region(s). = [SBOOT] MPU REGIONS CONFIGURATION Region 0 @:0 size:1d sub:0 perm:3 exec:1 Region 1 @:8000000 size:10 sub:f0 perm:3 exec:0 Region 2 @:800c000 size:d sub:ff perm:3 exec:0 Region 3 @:8000000 size:8 sub:0 perm:5 exec:0 Region 4 @:1fff7800 size:5 sub:0 perm:0 exec:1 Region 5 @:40000000 size:1c sub:0 perm:3 exec:1 = [SBOOT] RuntimeProtections: 1300 = [SBOOT] System Security Check successfully passed. Starting... ====================================================================== = (C) COPYRIGHT 2017 STMicroelectronics = = = = Secure Boot and Secure Firmware Update = ====================================================================== = [SBOOT] SECURE ENGINE INITIALIZATION SUCCESSFUL = [SBOOT] STATE: CHECK STATUS ON RESET INFO: A Reboot has been triggered by a Software reset! INFO: Last execution status before Reboot was:Executing Fw Image. INFO: Last execution detected error was: No error. Success. = [SBOOT] STATE: CHECK NEW FIRMWARE TO DOWNLOAD = [SBOOT] STATE: CHECK USER FW STATUS = [FWIMG] SLOT_ACTIVE_1 state = 1 New Fw to be installed from slot SLOT_DWL_1 = [SBOOT] STATE: INSTALL NEW USER FIRMWARE [MPU] Region 1 with 4 sub-region(s). [MPU] Region 2 with 0 sub-region(s). = [SBOOT] MPU REGIONS CONFIGURATION Region 0 @:0 size:1d sub:0 perm:3 exec:1 Region 1 @:8000000 size:10 sub:f0 perm:3 exec:0 Region 2 @:800c000 size:d sub:ff perm:3 exec:0 Region 3 @:8000000 size:8 sub:0 perm:5 exec:0 Region 4 @:1fff7800 size:5 sub:0 perm:0 exec:1 Region 5 @:40000000 size:1c sub:0 perm:3 exec:1 = [SBOOT] RuntimeProtections: 1300 19264 bytes of ciphertext decrypted. Image preparation done. Swapping the firmware images..................................................... = Installation procedure completed. = [FWIMG] FW installation succeeded. ========= End of Execution ========== [MPU] Region 1 with 4 sub-region(s). [MPU] Region 2 with 0 sub-region(s). = [SBOOT] MPU REGIONS CONFIGURATION Region 0 @:0 size:1d sub:0 perm:3 exec:1 Region 1 @:8000000 size:10 sub:f0 perm:3 exec:0 Region 2 @:800c000 size:d sub:ff perm:3 exec:0 Region 3 @:8000000 size:8 sub:0 perm:5 exec:0 Region 4 @:1fff7800 size:5 sub:0 perm:0 exec:1 Region 5 @:40000000 size:1c sub:0 perm:3 exec:1 = [SBOOT] RuntimeProtections: 1300 = [SBOOT] System Security Check successfully passed. Starting... ====================================================================== = (C) COPYRIGHT 2017 STMicroelectronics = = = = Secure Boot and Secure Firmware Update = ====================================================================== = [SBOOT] SECURE ENGINE INITIALIZATION SUCCESSFUL = [SBOOT] STATE: CHECK STATUS ON RESET INFO: A Reboot has been triggered by a Software reset! INFO: Last execution status before Reboot was:Installing new Fw Image. INFO: Last execution detected error was: No error. Success. = [SBOOT] STATE: CHECK NEW FIRMWARE TO DOWNLOAD = [SBOOT] STATE: CHECK USER FW STATUS = [FWIMG] SLOT_ACTIVE_1 state = 4 New Fw to be installed from slot SLOT_DWL_1 = [SBOOT] STATE: INSTALL NEW USER FIRMWARE [MPU] Region 1 with 4 sub-region(s). [MPU] Region 2 with 0 sub-region(s). = [SBOOT] MPU REGIONS CONFIGURATION Region 0 @:0 size:1d sub:0 perm:3 exec:1 Region 1 @:8000000 size:10 sub:f0 perm:3 exec:0 Region 2 @:800c000 size:d sub:ff perm:3 exec:0 Region 3 @:8000000 size:8 sub:0 perm:5 exec:0 Region 4 @:1fff7800 size:5 sub:0 perm:0 exec:1 Region 5 @:40000000 size:1c sub:0 perm:3 exec:1 = [SBOOT] RuntimeProtections: 1300 = [FWIMG] Additional code detected beyond FW image! = Installation procedure cannot be finalized! = [FWIMG] FW installation failed! = [SBOOT] STATE: HANDLE CRITICAL FAILURE = [EXCPT] FLASH ERROR! = [SBOOT] STATE: REBOOT STATE MACHINE ========= End of Execution ========== [MPU] Region 1 with 4 sub-region(s). [MPU] Region 2 with 0 sub-region(s). = [SBOOT] MPU REGIONS CONFIGURATION Region 0 @:0 size:1d sub:0 perm:3 exec:1 Region 1 @:8000000 size:10 sub:f0 perm:3 exec:0 Region 2 @:800c000 size:d sub:ff perm:3 exec:0 Region 3 @:8000000 size:8 sub:0 perm:5 exec:0 Region 4 @:1fff7800 size:5 sub:0 perm:0 exec:1 Region 5 @:40000000 size:1c sub:0 perm:3 exec:1 = [SBOOT] RuntimeProtections: 1300 = [SBOOT] System Security Check successfully passed. Starting... ====================================================================== = (C) COPYRIGHT 2017 STMicroelectronics = = = = Secure Boot and Secure Firmware Update = ====================================================================== = [SBOOT] SECURE ENGINE INITIALIZATION SUCCESSFUL = [SBOOT] STATE: CHECK STATUS ON RESET INFO: A Reboot has been triggered by a Software reset! INFO: Last execution status before Reboot was:Rebooting the State Machine INFO: Last execution detected error was: Flash error. = [SBOOT] STATE: CHECK NEW FIRMWARE TO DOWNLOAD = [SBOOT] STATE: CHECK USER FW STATUS = [FWIMG] SLOT_ACTIVE_1 state = 4 A FW is detected in the slot SLOT_ACTIVE_1 = [SBOOT] STATE: VERIFY USER FW SIGNATURE [MPU] Region 1 with 4 sub-region(s). [MPU] Region 2 with 0 sub-region(s). = [SBOOT] MPU REGIONS CONFIGURATION Region 0 @:0 size:1d sub:0 perm:3 exec:1 Region 1 @:8000000 size:10 sub:f0 perm:3 exec:0 Region 2 @:800c000 size:d sub:ff perm:3 exec:0 Region 3 @:8000000 size:8 sub:0 perm:5 exec:0 Region 4 @:1fff7800 size:5 sub:0 perm:0 exec:1 Region 5 @:40000000 size:1c sub:0 perm:3 exec:1 = [SBOOT] RuntimeProtections: 1300 = [SBOOT] STATE: EXECUTE USER FIRMWARE ====================================================================== = (C) COPYRIGHT 2017 STMicroelectronics = = = = User App #A = ====================================================================== =================== Main Menu ============================ Download a new Fw Image ------------------------------- 1 Test Protections -------------------------------------- 2 Test SE User Code ------------------------------------- 3 Multiple download ------------------------------------- 4 Validate a FW Image------------------------------------ 5 Selection : ================ New Fw Download ========================= -- Send Firmware -- -- Erasing download area ... ..... -- -- !!Aborted by user!! -- !!Operation failed!! =================== Main Menu ============================ Download a new Fw Image ------------------------------- 1 Test Protections -------------------------------------- 2 Test SE User Code ------------------------------------- 3 Multiple download ------------------------------------- 4 Validate a FW Image------------------------------------ 5 Selection : [MPU] Region 1 with 4 sub-region(s). [MPU] Region 2 with 0 sub-region(s). = [SBOOT] MPU REGIONS CONFIGURATION Region 0 @:0 size:1d sub:0 perm:3 exec:1 Region 1 @:8000000 size:10 sub:f0 perm:3 exec:0 Region 2 @:800c000 size:d sub:ff perm:3 exec:0 Region 3 @:8000000 size:8 sub:0 perm:5 exec:0 Region 4 @:1fff7800 size:5 sub:0 perm:0 exec:1 Region 5 @:40000000 size:1c sub:0 perm:3 exec:1 = [SBOOT] RuntimeProtections: 1300 = [SBOOT] System Security Check successfully passed. Starting... ====================================================================== = (C) COPYRIGHT 2017 STMicroelectronics = = = = Secure Boot and Secure Firmware Update = ====================================================================== = [SBOOT] SECURE ENGINE INITIALIZATION SUCCESSFUL = [SBOOT] STATE: CHECK STATUS ON RESET INFO: A Reboot has been triggered by a Hardware reset! INFO: Last execution status before Reboot was:Executing Fw Image. INFO: Last execution detected error was: No error. Success. = [SBOOT] STATE: CHECK NEW FIRMWARE TO DOWNLOAD = [SBOOT] STATE: CHECK USER FW STATUS = [FWIMG] SLOT_ACTIVE_1 state = 3 Installation not validated: rollback procedure initiated (SLOT_ACTIVE_1 / SLOT_DWL_1) = [SBOOT] STATE: ROLLBACK INSTALLATION TO PREVIOUS USER FIRMWARE = Rollback procedure completed. ========= End of Execution ========== [MPU] Region 1 with 4 sub-region(s). [MPU] Region 2 with 0 sub-region(s). = [SBOOT] MPU REGIONS CONFIGURATION Region 0 @:0 size:1d sub:0 perm:3 exec:1 Region 1 @:8000000 size:10 sub:f0 perm:3 exec:0 Region 2 @:800c000 size:d sub:ff perm:3 exec:0 Region 3 @:8000000 size:8 sub:0 perm:5 exec:0 Region 4 @:1fff7800 size:5 sub:0 perm:0 exec:1 Region 5 @:40000000 size:1c sub:0 perm:3 exec:1 = [SBOOT] RuntimeProtections: 1300 = [SBOOT] System Security Check successfully passed. Starting... ====================================================================== = (C) COPYRIGHT 2017 STMicroelectronics = = = = Secure Boot and Secure Firmware Update = ====================================================================== = [SBOOT] SECURE ENGINE INITIALIZATION SUCCESSFUL = [SBOOT] STATE: CHECK STATUS ON RESET INFO: A Reboot has been triggered by a Software reset! INFO: Last execution status before Reboot was:Rollback with previous Fw Image. INFO: Last execution detected error was: No error. Success. = [SBOOT] STATE: CHECK NEW FIRMWARE TO DOWNLOAD = [SBOOT] STATE: CHECK USER FW STATUS = [FWIMG] SLOT_ACTIVE_1 state = 4 A FW is detected in the slot SLOT_ACTIVE_1 = [SBOOT] STATE: VERIFY USER FW SIGNATURE [MPU] Region 1 with 4 sub-region(s). [MPU] Region 2 with 0 sub-region(s). = [SBOOT] MPU REGIONS CONFIGURATION Region 0 @:0 size:1d sub:0 perm:3 exec:1 Region 1 @:8000000 size:10 sub:f0 perm:3 exec:0 Region 2 @:800c000 size:d sub:ff perm:3 exec:0 Region 3 @:8000000 size:8 sub:0 perm:5 exec:0 Region 4 @:1fff7800 size:5 sub:0 perm:0 exec:1 Region 5 @:40000000 size:1c sub:0 perm:3 exec:1 = [SBOOT] RuntimeProtections: 1300 = SFU_IMG_VerifyActiveImg failure with se_status=1338049! Firmware signature verification failure in slot SLOT_ACTIVE_1 Erasing slot SLOT_ACTIVE_1 = [SBOOT] STATE: HANDLE CRITICAL FAILURE = [EXCPT] USER FW CANNOT BE VERIFIED. FAILURE! = [SBOOT] STATE: REBOOT STATE MACHINE ========= End of Execution ========== [MPU] Region 1 with 4 sub-region(s). [MPU] Region 2 with 0 sub-region(s). = [SBOOT] MPU REGIONS CONFIGURATION Region 0 @:0 size:1d sub:0 perm:3 exec:1 Region 1 @:8000000 size:10 sub:f0 perm:3 exec:0 Region 2 @:800c000 size:d sub:ff perm:3 exec:0 Region 3 @:8000000 size:8 sub:0 perm:5 exec:0 Region 4 @:1fff7800 size:5 sub:0 perm:0 exec:1 Region 5 @:40000000 size:1c sub:0 perm:3 exec:1 = [SBOOT] RuntimeProtections: 1300 = [SBOOT] System Security Check successfully passed. Starting... ====================================================================== = (C) COPYRIGHT 2017 STMicroelectronics = = = = Secure Boot and Secure Firmware Update = ====================================================================== = [SBOOT] SECURE ENGINE INITIALIZATION SUCCESSFUL = [SBOOT] STATE: CHECK STATUS ON RESET INFO: A Reboot has been triggered by a Software reset! INFO: Last execution status before Reboot was:Rebooting the State Machine INFO: Last execution detected error was: Verify user fw signature. = [SBOOT] STATE: CHECK NEW FIRMWARE TO DOWNLOAD = [SBOOT] STATE: CHECK USER FW STATUS No valid FW found in the active slots nor new FW to be installed Waiting for the local download to start... = [SBOOT] STATE: DOWNLOAD NEW USER FIRMWARE File> Transfer> YMODEM> Send ....