===== X-Cube-Cellular version : X-CUBE-CELLULAR-7.0.0 =====

CST: New State: BOOT_STATE
BG96 UART config: BaudRate=115200 / HW flow ctrl=1
CST: osCDS_cellular_service_init()
CST: modem state : CA_MODEM_POWER_OFF
CST: CST_notif_callback (Data Cache event=0)
CST: CST_notif_callback (Data Cache event=3)
CST: CST_send_message: BOOT_EVENT
DNS Server address: 8.8.8.8
SNTP Time Sync...0.pool.ntp.org
CST: AUTOM TASK: BOOT_STATE - BOOT_EVENT
CST: CST_boot_event_mngt
CST: New State: MODEM_INIT_STATE
CST: CST_send_message: MODEM_INIT_EVENT
CST: AUTOM TASK: MODEM_INIT_STATE - MODEM_INIT_EVENT
CST: CST_init_state_mngt
CST: osCDS_power_on()
SysCtrl_BG96:Waiting 5500 millisec for modem running...
SysCtrl_BG96:...done
    ATParser:*** SEND (size=11) ***
AT+IFC=2,2<CR>
    AT+IFC=2,2<CR><CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=3) ***
AT<CR>
    AT<CR><CR><LF>
    OK<CR><LF>
BG96:modem synchro established, proceed to normal power sequence
        ATParser:*** SEND (size=5) ***
ATE0<CR>
    ATE0<CR><CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=10) ***
AT+CMEE=2<CR>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=5) ***
ATV1<CR>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=6) ***
AT&D0<CR>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=8) ***
AT+CGMR<CR>
    <CR><LF>
    BG96MAR02A06M1G<CR><LF>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=12) ***
AT+CFUN=0,0<CR>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=11) ***
AT+CPSMS=0<CR>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=15) ***
AT+QCFG="band"<CR>
    <CR><LF>
    +QCFG: "band",0xf,0x400a0e189f,0xa0e189f<CR><LF>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=20) ***
AT+QCFG="iotopmode"<CR>
    <CR><LF>
    +QCFG: "iotopmode",0<CR><LF>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=20) ***
AT+QCFG="nwscanseq"<CR>
    <CR><LF>
    +QCFG: "nwscanseq",020301<CR><LF>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=21) ***
AT+QCFG="nwscanmode"<CR>
    <CR><LF>
    +QCFG: "nwscanmode",0<CR><LF>
    <CR><LF>
    OK<CR><LF>
BG96:>>>>> BG96 mode and bands configuration <<<<<
BG96:LTE Cat.M1 band active (scan rank = 1)
BG96:Cat.M1 BANDS config = 0x40a0e189f
BG96:CatM1_B1
BG96:CatM1_B2
BG96:CatM1_B3
BG96:CatM1_B4
BG96:CatM1_B5
BG96:CatM1_B8
BG96:CatM1_B12
BG96:CatM1_B13
BG96:CatM1_B18
BG96:CatM1_B19
BG96:CatM1_B20
BG96:CatM1_B26
BG96:CatM1_B28
BG96:CatM1_B39
BG96:GSM band active (scan rank = 2)
BG96:GSM BANDS config = 0xf
BG96:GSM_900
BG96:GSM_1800
BG96:GSM_850
BG96:GSM_1900
BG96:>>>>> ................................. <<<<<
CST: CST_notif_callback (Data Cache event=0)
CST: CST_notif_callback (Data Cache event=0)
CST: modem state : CA_MODEM_STATE_POWERED_ON
CST: CST_modem_sim_init
Modem Boot OK, sim slot nb 0
CST: --> CS_sim_select sim slot nb 0
CST: osCS_sim_select()
SysCtrl_BG96:MODEM SIM SOCKET SELECTED
    CST: --> check SIM First
CST: osCDS_init_modem()
    ATParser:*** SEND (size=12) ***
AT+CFUN=4,0<CR>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=9) ***
AT+QCCID<CR>
    <CR><LF>
    +CME ERROR: SIM failure<CR><LF>
ATCore ERROR:AT_sendcmd error
ATCore ERROR:AT_sendcmd error: parse from rsp
LOG ERROR #1: channel=1 / errorId=11 / gravity=2
LOG ERROR #2: channel=1 / errorId=14 / gravity=2
CST: CST_notif_callback (Data Cache event=6)
CST: CST_send_message: APN_CONFIG_EVENT
CST: --> Can't find sim on current slot. Increment sim slot.
CST: --> No more sim slot, no SIM found. Retry...
CST: CST_notif_callback (Data Cache event=4)
CST: --> Reboot modem.
CST: CST_config_fail: CST_modem_sim_init Fail !!!
LOG ERROR #3: channel=2 / errorId=1 / gravity=2
CST: New State: MODEM_REBOOT_STATE
CST: CST_send_message: MODEM_REBOOT_EVENT
CST: Subscribe modems events
CST: osCDS_subscribe_modem_event()
    CST: New State: APN_CONFIG_STATE
CST: AUTOM TASK: APN_CONFIG_STATE - APN_CONFIG_EVENT
CST: CST_notif_callback (Data Cache event=6)
CST: New State: MODEM_RESET_STATE
CST: CST_send_message: MODEM_RESET_EVENT
CST: AUTOM TASK: MODEM_RESET_STATE - MODEM_REBOOT_EVENT
CST: CST_modem_reset_mngt
CST: CST_notif_callback (Data Cache event=0)
CST: CST_notif_callback (Data Cache event=0)
CST: modem state : CA_MODEM_REBOOTING
CST: New State: MODEM_INIT_STATE
CST: CST_send_message: MODEM_INIT_EVENT
CST: AUTOM TASK: MODEM_INIT_STATE - MODEM_RESET_EVENT
CST: Subscribe modems events
CST: osCDS_subscribe_modem_event()
    CST: AUTOM TASK: MODEM_INIT_STATE - MODEM_INIT_EVENT
CST: CST_init_state_mngt
CST: osCDS_power_on()
CST: CST_notif_callback (Data Cache event=0)
CST: CST_notif_callback (Data Cache event=0)
CST: modem state : CA_MODEM_STATE_POWERED_ON
CST: CST_modem_sim_init
Modem Boot OK, sim slot nb 0
CST: --> CS_sim_select sim slot nb 0
CST: osCS_sim_select()
SysCtrl_BG96:MODEM SIM SOCKET SELECTED
    CST: --> check SIM First
CST: osCDS_init_modem()
    ATParser:*** SEND (size=12) ***
AT+CFUN=4,0<CR>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=9) ***
AT+QCCID<CR>
    <CR><LF>
    +CME ERROR: SIM failure<CR><LF>
ATCore ERROR:AT_sendcmd error
ATCore ERROR:AT_sendcmd error: parse from rsp
LOG ERROR #4: channel=1 / errorId=11 / gravity=2
LOG ERROR #5: channel=1 / errorId=14 / gravity=2
CST: --> Can't find sim on current slot. Increment sim slot.
CST: --> No more sim slot, no SIM found. Retry...
CST: --> Reboot modem.
CST: CST_config_fail: CST_modem_sim_init Fail !!!
LOG ERROR #6: channel=2 / errorId=1 / gravity=2
CST: New State: MODEM_REBOOT_STATE
CST: CST_send_message: MODEM_REBOOT_EVENT
CST: Subscribe modems events
CST: osCDS_subscribe_modem_event()
    CST: AUTOM TASK: MODEM_REBOOT_STATE - MODEM_REBOOT_EVENT
CST: CST_modem_reboot_mngt
CST_modem_power_off
CST: Power off modem
CST: osCDS_power_off()
    CST: CST_notif_callback (Data Cache event=0)
CST: CST_notif_callback (Data Cache event=0)
CST: modem state : CA_MODEM_REBOOTING
CST: New State: MODEM_INIT_STATE
CST: CST_send_message: MODEM_INIT_EVENT
CST: AUTOM TASK: MODEM_INIT_STATE - MODEM_INIT_EVENT
CST: CST_init_state_mngt
CST: osCDS_power_on()
SysCtrl_BG96:Waiting 5500 millisec for modem running...
SysCtrl_BG96:...done
    ATParser:*** SEND (size=11) ***
AT+IFC=2,2<CR>
    AT+IFC=2,2<CR><CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=3) ***
AT<CR>
    AT<CR><CR><LF>
    OK<CR><LF>
BG96:modem synchro established, proceed to normal power sequence
        ATParser:*** SEND (size=5) ***
ATE0<CR>
    ATE0<CR><CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=10) ***
AT+CMEE=2<CR>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=5) ***
ATV1<CR>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=6) ***
AT&D0<CR>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=8) ***
AT+CGMR<CR>
    <CR><LF>
    BG96MAR02A06M1G<CR><LF>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=12) ***
AT+CFUN=0,0<CR>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=11) ***
AT+CPSMS=0<CR>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=15) ***
AT+QCFG="band"<CR>
    <CR><LF>
    +QCFG: "band",0xf,0x400a0e189f,0xa0e189f<CR><LF>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=20) ***
AT+QCFG="iotopmode"<CR>
    <CR><LF>
    +QCFG: "iotopmode",0<CR><LF>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=20) ***
AT+QCFG="nwscanseq"<CR>
    <CR><LF>
    +QCFG: "nwscanseq",020301<CR><LF>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=21) ***
AT+QCFG="nwscanmode"<CR>
    <CR><LF>
    +QCFG: "nwscanmode",0<CR><LF>
    <CR><LF>
    OK<CR><LF>
BG96:>>>>> BG96 mode and bands configuration <<<<<
BG96:LTE Cat.M1 band active (scan rank = 1)
BG96:Cat.M1 BANDS config = 0x40a0e189f
BG96:CatM1_B1
BG96:CatM1_B2
BG96:CatM1_B3
BG96:CatM1_B4
BG96:CatM1_B5
BG96:CatM1_B8
BG96:CatM1_B12
BG96:CatM1_B13
BG96:CatM1_B18
BG96:CatM1_B19
BG96:CatM1_B20
BG96:CatM1_B26
BG96:CatM1_B28
BG96:CatM1_B39
BG96:GSM band active (scan rank = 2)
BG96:GSM BANDS config = 0xf
BG96:GSM_900
BG96:GSM_1800
BG96:GSM_850
BG96:GSM_1900
BG96:>>>>> ................................. <<<<<
CST: CST_notif_callback (Data Cache event=0)
CST: CST_notif_callback (Data Cache event=0)
CST: modem state : CA_MODEM_STATE_POWERED_ON
CST: CST_modem_sim_init
Modem Boot OK, sim slot nb 0
CST: --> CS_sim_select sim slot nb 0
CST: osCS_sim_select()
SysCtrl_BG96:MODEM SIM SOCKET SELECTED
    CST: --> check SIM First
CST: osCDS_init_modem()
    ATParser:*** SEND (size=12) ***
AT+CFUN=4,0<CR>
    <CR><LF>
    OK<CR><LF>
    ATParser:*** SEND (size=9) ***
AT+QCCID<CR>
    <CR><LF>
    +CME ERROR: SIM failure<CR><LF>
ATCore ERROR:AT_sendcmd error
ATCore ERROR:AT_sendcmd error: parse from rsp
LOG ERROR #7: channel=1 / errorId=11 / gravity=2
LOG ERROR #8: channel=1 / errorId=14 / gravity=2
CST: --> Can't find sim on current slot. Increment sim slot.
CST: --> No more sim slot, no SIM found. Retry...
CST: --> Reboot modem.
CST: CST_config_fail: CST_modem_sim_init Fail !!!
LOG ERROR #9: channel=2 / errorId=1 / gravity=2
CST: New State: MODEM_REBOOT_STATE
CST: CST_send_message: MODEM_REBOOT_EVENT
CST: Subscribe modems events
CST: osCDS_subscribe_modem_event()
    CST: AUTOM TASK: MODEM_REBOOT_STATE - MODEM_REBOOT_EVENT
CST: CST_modem_reboot_mngt
CST_modem_power_off
CST: Power off modem
CST: osCDS_power_off()